Silvermills floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units across Silvermills, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Saw-cut joints left open and packed with grit
- Brittle joint filler breaking up
- Grimy joint lines spoiling a showroom floor
Need floor joint sealing in Silvermills?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
FAQs: Silvermills
Can you work at a site such as Beaverbank Business Park, by Silvermills?
Yes. Estates, retail parks and business parks around Silvermills, Beaverbank Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Do you take on work at healthcare sites like Western General Hospital (Edinburgh)?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long does a job like this take?
That varies with the scale of the job, but the work usually takes a day for smaller units, with bigger warehouse floors programmed over several visits. For bigger or phased jobs, we will set out a timescale with the quote.
Why is there a gap next to the joint filler?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is typically dealt with by topping up.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Should floor joints be filled or sealed?
The answer comes from the traffic and the joint’s movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
How soon can traffic go back on the floor?
Cure times vary with the product and the conditions. You’ll get a reopening time for each area before we start.
Floor joint sealing for commercial buildings in Silvermills
Some joints reach us with their edges already broken. A filler laid against broken edges has nothing sound to grip, so we will tell you if the joint edges need repairing first and explain how it affects the programme. We work on loading bays, forklift and pallet-truck routes and construction joints, and the failures we are asked to look at most are open saw cuts full of debris and grimy joint lines spoiling a showroom floor. Most enquiries from Silvermills start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Industrial estates around Scotland’s cities hold warehouses, trade units and distribution sheds, whose floor joints take forklift and pallet-truck traffic daily. The right filler or sealant, laid in phases, keeps them operating.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Location
- Silvermills (EH3, EH2, EH4)
- Wider area
- Edinburgh
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. Work on a big city site in Scotland usually involves inductions and permits. Tell us the rules and we’ll work to them.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Before we start on site
- Flag any permit to work we’ll need
- Let building users know which areas are affected
- Agree which areas must stay open
Get a fixed quote
For a fixed quote, call the office on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Cost factors for floor joints
We price every job individually. The things that drive the figure:
- Removal of failed or old sealant
- Joint width, depth and condition
- Travel to remote or island sites
- Quantities, in metres or numbers
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you are ready.
Before you send an enquiry
A few photos plus some basic facts will normally do. Please tell us:
- Any specification or named product
- Clear photos of the problem areas
- The asbestos register, for older buildings
- What the building is and how it’s used
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email a schedule or drawings.
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Slabs, ramps and loading bays in Silvermills
With the shore within about 1 mile, Silvermills counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. Silvermills is on Scotland’s drier eastern side. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them in drier months limits winter damage.
Sites like Western General Hospital (Edinburgh) (to the west of Silvermills) carry ambulances, deliveries and visitors’ cars over their road and deck joints. Parks like Beaverbank Business Park, 0.6 miles north-east of Silvermills, combine paved areas, car parks and building elevations, each with joints that move.
Silvermills is about 1 mile north of Edinburgh, in Edinburgh. We cover commercial sites throughout Silvermills, for single jobs and planned programmes alike. Across Edinburgh, 174 places are covered, Silvermills among them.
Business premises anywhere in EH3, EH2 and EH4 are within our area for floor joints. Buildings on Canon Lane, Circus Lane and Albany Lane are within our area for floor joints. Nearby places we also cover include Stockbridge (1 mile west), Comely Bank (1 mile west), Warriston (1 mile north), Inverleith (1 mile north-west) and Dean Village (1 mile south-west) for floor joints. Bigger towns within reach include Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (4 miles south-east), Gilmerton (5 miles south-east), Slateford (3 miles south-west) and Gracemount (4 miles south-east). Among the larger centres in Edinburgh is Silvermills, and its commercial and public buildings are all within our area.
What’s near Silvermills
We work on buildings around Stockbridge public library, Hamilton's Bar & Kitchen and Drummond Community High School and the streets around them. You’ll also find King George V Park (under half a mile north-east) and St Cuthbert's Church (0.6 miles south). For rail, the closest station is Edinburgh Waverley station, roughly 0.7 miles south-east of the centre. Nearby you’ll also find Waverley Mall (0.6 miles south-east) and Royal Public Dispensary of Edinburgh (0.8 miles south-east). Not far away are The New Leaf Co-op and Dunsapie Loch.
Why act early in Silvermills
A floor coating laid over open joints soon cracks along the joint lines. Joints need their own treatment before or alongside any coating work. Getting access arranged for a building in Silvermills takes time, so deal with all failing joints while access is up.
A quote for floor joints depends on how many there are, their condition and the access, plus any specification you’re working to. Ask us for a fixed quote.
Why us?
- Constructionline member for supplier checks
- Fixed quotes based on photos, drawings or a visit
- Products installed to the manufacturer’s instructions
- CHAS accredited
Take a look at what affects the cost or our accreditations.
Places near Silvermills
Other services in Silvermills
When to call us in Silvermills
Oil, laitance, dust and old cleaning chemicals build up inside joints. Without cutting back to sound, clean concrete the new filler can’t stay bonded.
What tends to prompt an enquiry:
- Dock area joints that have failed first
- Soft sealant dragged out of trafficked joints
- Scruffy, dirty joint lines on a shop or showroom floor
- Trucks and loads jolting over damaged joints
At places like Stewartfield Industrial Estate, 1 mile north-east of Silvermills, joints are sealed a section at a time so operations carry on.
Questions to ask before you book
- How joint depth will be controlled
- How the existing material will be dealt with
- Can the work be phased to keep areas open?
- Are they CHAS accredited or on Constructionline?