Industrial and floor joint sealing in Stenhouse, Edinburgh
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Stenhouse and the surrounding area. Send details for a fixed quote.
- Saw-cut joints left open and packed with grit
- Soft sealant dragged out of trafficked joints
- Drivers complaining about joints on a route
Floor joint sealing near Stenhouse
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Stenhouse, done properly
Forklifts and pallet trucks are hard on open joints. Every pass chips at the bare concrete edge, and over time a neat cut turns into a ragged channel. Filling the joint properly gives the edges back their support, which is kinder to trucks, loads and operators. Most enquiries involve cracked and crumbling joint fill and joint edges breaking up under truck wheels, across construction joints, joints along racking aisles and loading bays. Most enquiries from Stenhouse start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
In Scottish cities, where newer extensions meet older stone buildings, movement joints take the difference. They need the right movement class and correct width and depth to last.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Stenhouse (EH11, EH12, EH14)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Signs you need floor joint sealing in Stenhouse
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Where a joint is open, the wheel dips and strikes the far edge and those knocks chip the edge apart bit by bit.
Most enquiries start with one or more of the following:
- Trucks and loads jolting over damaged joints
- Soft sealant dragged out of trafficked joints
- Old filler gone hard, cracked or loose
- Failing joints at loading bays and dock doors
Retail parks like Edinburgh West Retail Park, 0.6 miles to the south-east of Stenhouse, have long runs of car park and yard joints taking daily traffic.
Questions to ask before you book
- Their plan for phasing and protecting the area
- Proof of insurance
- Will CSCS-carded applicators be on site?
- The terms of the workmanship guarantee
More services for Stenhouse
Honest limits
Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:
- Uneven floors that need grinding or levelling
- Cracks across panels caused by settlement or overload
- A floor that rocks at the joints, which needs a structural fix
If you are not sure, just call 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Loading bays
- Construction joints
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Joints along racking aisles
- Retail and showroom floors
Your questions answered
Can you take on a job at a hospital such as Spire Murrayfield Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work at a site such as Edinburgh West Retail Park, by Stenhouse?
Yes. Our area takes in Stenhouse and its surroundings, with estates and business parks such as Edinburgh West Retail Park included. To start, just phone 01277 525 020 or email the details over with the unit, the joints involved and your access times.
How long does a typical visit take?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators.
Is it normal for joint filler to separate?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We look at which it is before recommending anything.
Floors, slabs and movement joints in Stenhouse
The sea is no more than about 3 miles from Stenhouse. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. At least three named trading, business or retail sites lie within about 3 miles of Stenhouse. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
University campuses such as Edinburgh Napier University (to the south-east of Stenhouse) have car parks, paved walkways and building elevations with movement joints. At places like West Gorgie Park Industrial Estate, which lies east of Stenhouse, joints are sealed a section at a time so operations carry on.
Stenhouse is about 2 miles west of Edinburgh, in Edinburgh. Commercial clients in Stenhouse use us for work on floor joints, as part of our coverage of Edinburgh. Our Edinburgh coverage takes in 174 places, from busy centres to rural villages.
We cover the EH11, EH12 and EH14 postcode districts. Buildings on Ford's Road, Elfin Square and Whitson Road are within our area for floor joints. You’ll find Stenhouse on or near the A71. We also cover Saughton (1 mile south-west), Carrick Knowe (1 mile north-west), Chesser (1 mile south-east), Parkhead (1 mile south) and Longstone (1 mile south). Nearby towns on our patch include Leith (5 miles north-east), Bonnington (4 miles north-east), Greenside (3 miles north-east), Broughton (3 miles north-east), Bellevue (3 miles north-east) and Silvermills (3 miles north-east).
Near you in Stenhouse
We work on buildings around Cross Keys Tavern, Gabrielle Keiller Library and Scotus Academy. Other local landmarks include Merchiston Castle School (1.4 miles south) and Saughton Park (less than half a mile east). For rail, the closest station is Slateford station, about 0.8 miles south-east. Nearby you will also find Corstorphine Hospital (0.8 miles north-west) and Craigcrook Castle (1.6 miles north). Green spaces nearby include Craiglockhart Hill and Dunsapie Loch.
From enquiry to sign-off
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before the next one starts. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we will work to them.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Point out parking and an unloading spot
- Share your working hours and any access restrictions
Getting a fixed quote
To get a fixed quote, ring 01277 525 020 or email drawings and photos with the site address and an outline of the work. Our quote form is another easy route.
Related advice
Cost factors for floor joints
A fixed quote reflects the actual work. It takes account of:
- Which sealant the job calls for
- Joint width, depth and condition
- Quantities, in metres or numbers
- How much existing material needs removing
A quote for floor joints depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Sending details for a quote
There’s no need for a formal survey. These details are enough to start:
- The site address and postcode
- Asbestos survey details if the building is older
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Stenhouse can form part of a wider programme.
What the job involves on each surface
Forklift and pallet-truck routes
Joints on busy routes need a fill that sits flush and resists impact. Wheel type and traffic level steer the product choice.
Flexible floor sealants
Polyurethane sealants suit floor joints with larger movement. They give less edge support than semi-rigid fillers, so they suit lighter traffic or movement joints.