Floor Joint Sealing contractors in Brighton and Hove
Floor joint sealing for Brighton and Hove, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Soft sealant dragged out of trafficked joints
- Saw-cut joints left open and packed with grit
- Drivers complaining about joints on a route
Floor joint sealing for Brighton and Hove sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Brighton and Hove
Across Brighton and Hove, it runs the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote, or we can arrange a site visit. We work on saw-cut induced joints, retail and showroom floors and joints along racking aisles, and the failures we’re asked to look at most are failing joints at loading bays and dock doors and unfilled floor joints collecting dirt and grit. For commercial sealant work in Brighton and Hove, you deal with one contact from quote to sign-off, whether it’s one building or several.
Joints in town car parks and service yards take tyres, de-icing salt and standing water. Catching a joint before its edges break is the simpler route.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Brighton and Hove (BN3, BN41, BN1)
- Region
- Brighton and Hove
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Brighton and Hove: questions and answers
Does your area include sites such as Portland Road Trading Estate, near Brighton and Hove?
Yes. Our area takes in Brighton and Hove and its surroundings, with estates and business parks such as Portland Road Trading Estate included. To start, just give us a call on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Is a hospital such as Nevill Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can the warehouse stay open while you work?
We phase it. Areas are taken out of use a section at a time around the site hours and access windows you give us.
Is Brighton and Hove in your area?
Yes. We take on work across Brighton and Hove, with one number for every area we cover.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
How the job changes by surface
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. That is normally dealt with by topping up later, and we’ll explain it when we quote.
Retail and showroom floors
Retail work is phased around trading. Tell us your site hours and access windows and we’ll plan around them.
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
- Worn screed or surface finishes
- Cracks across panels caused by settlement or overload
If you’re not sure, just ring 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
What we seal
- Forklift and pallet-truck routes
- Loading bays
- Construction joints
- Saw-cut induced joints
- Retail and showroom floors
- Joints along racking aisles
Diagnose, treat, sign off
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Most work in Brighton and Hove is one building at a time: a school, a unit, an office or a block. Your photographs, drawings or a site visit come first, followed by a fixed quote.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Before we start on site
- Have the specification and drawings to hand
- Make sure the joints can be reached
- Send asbestos survey details if the building is pre-2000
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call the office on 01277 525 020 or email us if you’d rather talk the job through.
Related advice
Signs you need floor joint sealing in Brighton and Hove
Joints near dock doors see colder air, rain blown in and water off vehicles, as well as the tightest turning loads. That is normally where joint failure starts.
What tends to prompt an enquiry:
- Cracked and crumbling joint fill
- Joint fill separating from the concrete
- Untidy open joints in a retail unit
- Failing joints at loading bays and dock doors
A campus such as University of Brighton Moulesecoomb Campus (to the east of Brighton and Hove) has long runs of movement joint in its buildings, decks and paving.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- Who will actually carry out the work
- The terms of the workmanship guarantee
- Can the work be phased to keep areas open?
Owners, agents and contractors
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Floor joint sealing in Brighton and Hove: the local picture
Brighton and Hove is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Less than 3 miles from Brighton and Hove there are at least three named estates and business parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
On industrial estates such as Portland Road Trading Estate, 0.5 miles to the west of Brighton and Hove, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. Schools like West Hove Infant School often have long brick elevations with movement joints that age quietly.
Brighton and Hove is in England. Commercial clients in Brighton and Hove use us for work on floor joints, as part of our coverage of Brighton and Hove. Our Brighton and Hove coverage takes in 29 places, from busy centres to rural villages.
We cover the BN3, BN41 and BN1 postcode districts for floor joints. If your site is on New Church Road, Princes Square and Station Road or close by, send details and we’ll quote for floor joints. Being close to the A270 and A293, Brighton and Hove is easy to get to with materials and equipment. We also cover Aldrington (1 mile south-west), West Blatchington (1 mile north-east), Hove (1 mile south-east), Prestonville (2 miles east) and Brunswick (2 miles south-east) for floor joints. Bigger towns within reach include Brighton (3 miles east), Carlton Hill (3 miles east), Hanover (3 miles east), Kemptown (3 miles south-east), Hollingdean (3 miles east) and Whitehawk (4 miles east).
Near you in Brighton and Hove
Recent enquiries here include premises near Hove Park, The Drive Prep School and Hove Park School and the streets around them. Brighton and Hove has its own railway station: Aldrington station. Other landmarks nearby include British Engineerium (0.7 miles north-east) and Churchill Square (2.1 miles south-east). For a walk, there’s Thundersbarrow Hill and Ladies Mile.