Aldrington floor joint sealing
Looking for floor joint sealing in Aldrington? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Trucks and loads jolting over damaged joints
- Dock area joints that have failed first
- Brittle joint filler breaking up
Floor joint sealing across Aldrington
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Aldrington, done properly
Most industrial slabs are divided into panels with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. Site teams most often ask us about joint edges breaking up under truck wheels and joint fill separating from the concrete, on retail and showroom floors, saw-cut induced joints and joints along racking aisles. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Aldrington is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Rural business units around smaller places such as Aldrington often have new slabs laid inside older buildings. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Aldrington (BN3, BN41, BN42)
- Wider area
- Brighton and Hove
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Questions we’re asked in Aldrington
Is Portland Road Trading Estate, near Aldrington, within your area?
Yes. Our area takes in Aldrington and its surroundings, with estates and business parks such as Portland Road Trading Estate included. To start, just call the office on 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Is a smaller place like Aldrington outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you use semi-rigid filler or flexible sealant on floor joints?
The answer comes from the traffic and the joint’s movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Nearby places to Aldrington
Also in Aldrington
Why it’s worth doing now in Aldrington
Broken joints shake trucks, stock and operators alike. That means extra wear on wheels and a rougher ride for staff, adding costs nobody plans for. A properly filled joint smooths the route. Over time, UV, weather and movement wear any sealant out. Replacing it before it fails keeps water out.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why choose Mastic Doctor in Aldrington
- Work to your specification and the manufacturer’s guidance
- Fixed quotes based on photos, drawings or a visit
- Work carried out by CSCS-carded applicators
- Joints cleaned back to sound surfaces
See our cost guide or how we’re accredited.
Joints that move: notes for Aldrington
With the shore within about 1 mile, Aldrington counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so a failed joint lets more in and the edges break up sooner. Aldrington is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
For estates staff at a university like University of Brighton Moulesecoomb Campus, 3.4 miles east of Aldrington, building and paving joints are part of the planned maintenance list. On industrial estates such as Portland Road Trading Estate, under half a mile to the north-west of Aldrington, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Aldrington is about 1 mile south-west of Brighton and Hove, in Brighton and Hove. Looking for floor joint sealing in Aldrington? We can help. 29 places across Brighton and Hove fall within our area, Aldrington among them.
Commercial sites across BN3, BN41 and BN42 are covered. If your site is on Wish Road, Saxon Road and Roman Road or close by, we can quote for floor joints. Close to Aldrington, our area also takes in Brighton and Hove (1 mile north-east), Hove (1 mile east), West Blatchington (1 mile north-east), Brunswick (2 miles east) and Prestonville (2 miles east). Bigger towns within reach include Brighton (3 miles east), Carlton Hill (3 miles east), Hanover (3 miles east), Kemptown (3 miles east), Hollingdean (3 miles east) and Whitehawk (4 miles east).
What’s near Aldrington
Recent enquiries here include premises near The Drive Prep School, The Gather Inn and Hove Park School and the streets around them. The closest station to Aldrington is Portslade station, about 0.6 miles north-west. Other landmarks nearby include Montefiore Hospital (1.7 miles east) and British Engineerium (1.2 miles north-east). For a walk, there’s Shoreham Beach and Thundersbarrow Hill.
From enquiry to sign-off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before the next one starts. For a job in Aldrington, the main thing is a clear picture of the work, so send photographs of each area. You’ll then get a fixed price for the work.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Preparing the site
- Point out any areas we must not close
- Have the specification and drawings to hand
- For older buildings, check the asbestos register before work
Request a quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or email the details over.
Read more
Common problems we fix in Aldrington
Unfilled joints soon pack with grit, shrink-wrap scraps and pallet splinters. Packed debris acts like a wedge every time a wheel crosses so the arrises break sooner.
These are often picked up first by site or facilities staff:
- Dock area joints that have failed first
- Soft sealant dragged out of trafficked joints
- Cracked and crumbling joint fill
- Saw-cut joints left open and packed with grit
Across sites such as Victoria Road Trading Estate, 0.8 miles north-west of Aldrington, floor and movement joints can be sealed in phases so units keep working.
What your quote should include
- Will CSCS-carded applicators be on site?
- Their pre-qualification and accreditations
- Their plan for phasing and protecting the area
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Surface by surface
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. A filled joint lets wheels roll across and saves the edges.
Construction joints
Where a day joint crosses a truck route, its edges take heavy punishment. We look at how much they are moving before choosing the treatment.
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Photograph any joint that starts to chip
- Remind operators to lift rather than drag
- Treat loading bay joints first if they’re failing
- Walk the main routes and inspect joint lines on a regular cycle
Normal floor cleaning is fine once the product has cured. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas and keeps on top of the rest.