Commercial sealant contractors in Brighton and Hove
Work needed on a sealant joint in Brighton and Hove? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Damp patches where an external joint has failed
- Weathered facade sealant that no longer flexes
- Black mould through washroom sealant that won’t clean off
Need commercial sealant contractors in Brighton and Hove?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle commercial sealant contractors in Brighton and Hove
Sometimes a split bead is a symptom rather than the cause. A leak near a frame edge can start in the frame, the cill or the cavity, and repeated splits in a movement joint can mean the joint is too narrow for the movement. Part of the job is telling you when the fix is something other than sealant. We work on washrooms and tea points, movement joints in walls and floors and window and door perimeters, and the failures we are asked to look at most are frame mastic that has hardened and come away from the wall and greasy, split joints in a kitchen or tea point. One point of contact handles commercial sealant work in Brighton and Hove from the first photos to the final walk-round, for single jobs and planned programmes alike.
On a typical commercial building in Brighton and Hove, the joints that fail first are the hardest-worked ones: frame perimeters in the sun, floor joints at doorways and anything that gets wet every day.
In a town the size of Brighton and Hove, commercial buildings tend to be high-street shops, offices over shops, schools, care homes and small industrial units. Shopfronts, kitchens, washrooms and frames all have sealant that ages, and where a frontage is on show, a matched colour keeps it looking right.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Brighton and Hove (BN3, BN41, BN1)
- Wider area
- Brighton and Hove
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Any access equipment needed
- The site’s rules and procedures
- Distance, for remote addresses
- The size and state of each joint
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Sending details for a quote
We can often quote from photos and a few details. Please tell us:
- The type of building and who uses it
- Any dates the work must fit around
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Commercial sealant contractors in Brighton and Hove: the local picture
Brighton and Hove is within about 1 mile of the coast. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Sea-facing elevations are typically where failed joints show first. At least three named trading, business or retail sites lie within about 3 miles of Brighton and Hove. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints, often in a colour the occupier specifies.
A unit on an estate like Portland Road Trading Estate, 0.5 miles to the west of Brighton and Hove, normally has an office front, a trade counter and staff facilities with joints of their own. For premises near Aldrington station, less than half a mile east of Brighton and Hove, footfall is part of the plan: work is phased so shops and offices keep trading. Occupiers with premises at both Portland Road Trading Estate and Goldstone Retail Park could have the sealant at each handled under one quote.
Brighton and Hove is in England. If you’re looking for commercial sealant contractors in Brighton and Hove, we can help, as we do across Brighton and Hove. We work across 29 places in Brighton and Hove, from busy centres to rural villages.
We take on sealant joints across the BN3, BN41 and BN1 postcode area. For a building on New Church Road, Princes Square and Station Road or nearby, send details and we’ll quote for sealant joints. Main routes into Brighton and Hove include the A270 and A293, which helps when planning parking and deliveries for the job. Sites close to Brighton and Hove are covered too, including Aldrington (1 mile south-west), West Blatchington (1 mile north-east), Hove (1 mile south-east), Prestonville (2 miles east) and Brunswick (2 miles south-east). A short drive away, we cover Brighton (3 miles east), Carlton Hill (3 miles east), Hanover (3 miles east), Kemptown (3 miles south-east), Hollingdean (3 miles east) and Whitehawk (4 miles east).
What’s near Brighton and Hove
Locally, jobs take us to sites close to Hove Park, The Drive Prep School and Hove Park School. There’s a railway station in Brighton and Hove itself: Aldrington station. Other landmarks nearby include British Engineerium (0.7 miles north-east) and Churchill Square (2.1 miles south-east). For a walk, there’s Thundersbarrow Hill and Ladies Mile.
Surface by surface
Facade and cladding joints
Facade sealant failures can be hard to spot from the ground. Photos from a closer viewpoint help us price, and we’ll confirm the colours available for the specified product.
Fire-rated seals where specified
Fire-rated sealant is only one type of fire-stopping product. Collars, wraps, batts and boards are specified for other services and gaps.
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Town-centre premises in Brighton and Hove may have limited parking, so tell us what’s nearby. On estates and business parks it’s normally simpler.
- First, details reach us through the quote form or a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Where parts of the building must stay open, the work is phased.
- Old sealant is cut out completely, never sealed over.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
Before we start on site
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
- Warn occupants and staff about the work
Ask for a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email a schedule or drawings.
Read more
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Make sure contractors see the asbestos survey before cutting out old mastic
- Report cracked or peeling sealant early
- Don’t let cleaning or traffic back on before the cure time is up
- Brief cleaning contractors to avoid scourers and blades on sealant
Later works are the usual way new joints get damaged. When fittings are moved or cabling added, the sealant nearby is easily disturbed. Where work has disturbed a joint, just ring 01277 525 020 or use the quote form for a quote.
Tenants and staff spot black or split sealant quickly, and in a hotel, office or shop it makes the whole space look neglected. Replacing it on a planned cycle keeps complaints down.
FAQs: Brighton and Hove
Does a coastal location like Brighton and Hove affect which sealant is used?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Is Portland Road Trading Estate, near Brighton and Hove, within your area?
Yes. Our area takes in Brighton and Hove and its surroundings, with estates and business parks such as Portland Road Trading Estate included. To start, just call the office on 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
How do we get a quote?
Price depends on joint lengths and widths, how much removal is involved, the product, access and phasing. To get a fixed price, send details through our quote form, or phone or email us.
Do you cover Brighton and Hove?
Yes. Brighton and Hove is in our area. For a quote, phone 01277 525 020 or email the details over.
Will the building have to shut during the work?
It’s normal for us to work in occupied buildings. We agree the order of areas, protect what’s nearby and close off only the section we are sealing, until its cure time has passed.
Do you work for facilities managers and managing agents?
Yes. You send the details, we return a fixed quote, and the job is done and signed off, with a 12-month guarantee on the workmanship.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Also near Brighton and Hove
More services for Brighton and Hove
When something else is needed
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Suspect materials that need testing and specialist removal
- Faulty windows rather than failed perimeter sealant
- Roof leaks that only look like a joint problem
If in doubt, call 01277 525 020 or send photos by email and we’ll say what we think before you book.
Joints and surfaces we work on
- Washrooms and tea points
- Movement joints in walls and floors
- Kitchen worktops and splashbacks
- External facade joints
- Window and door perimeters
- Floor and threshold joints