Fire-rated sealing and fire stopping in Liquo, North Lanarkshire
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Liquo and the surrounding area. Send details for a fixed quote.
- Snag lists that include open service penetrations
- Fire-rated sealant that has cracked or shrunk back
- Expanding foam used as fire stopping
Fire stopping across Liquo
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Liquo
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. Most enquiries involve non-fire-rated filler around services and fire seals cut back for extra cables and never reinstated, on small duct penetrations where the tested detail allows, pipe penetrations and linear gaps at wall heads. A specialist sealant contractor works differently from a general builder: in Liquo, that means joint design, primers and backing rod as standard.
For a building near Liquo, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Liquo (ML7)
- Region
- North Lanarkshire
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Penetration seals near Liquo
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Large healthcare estates like Cleland Hospital, 2.9 miles to the west of Liquo, change their services often, so penetration seals are worth checking after M&E work. Industrial units on estates such as Glenburn Industrial Estate (1.9 miles north-east of Liquo) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Liquo (Gaelic: Bowhousebog) is about 4 miles north-east of Wishaw, in North Lanarkshire. Commercial clients in Liquo use us for work on service penetrations, as part of our coverage of North Lanarkshire. Our North Lanarkshire coverage takes in 100 places. Sites around Glasgow have their own page, roughly 17 miles from Liquo.
We take on service penetrations across the ML7 postcode area, for business premises of every kind. We also cover Hartwood (1 mile north), Allanton (1 mile south), Bonkle (1 mile south-west), Burnbrae (2 miles east) and Shotts (2 miles north-east). Bigger towns within reach include Motherwell (6 miles west), Cumbernauld (12 miles north-west), Coatbridge (8 miles north-west), Airdrie (7 miles north-west), Wishaw (4 miles south-west) and Bellshill (7 miles west).
Around Liquo
There’s a railway station in Liquo itself: Hartwood station. A little further out are Shotts Heritage Centre (1.9 miles north-east) and Cleland Hospital (2.8 miles west). Green spaces nearby include Allanton House lake.
What else we do in Liquo
What the job involves on each surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers first.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance along with any permits your site needs.
Diagnose, treat, sign off
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. For work around Liquo, we aim for one trip, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Point out any areas we must not close
- For older buildings, check the asbestos register before work
- Tell staff and tenants when we’ll be in
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or email a schedule or drawings.
Read more
Your questions answered
Can you work on a hospital site such as Cleland Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Is Liquo too far out for you?
Not at all. Liquo is within our area. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Can one quote cover more than one building?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Will you come and look before quoting?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
What will the job cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
What does an EI 60 rating mean?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. EI 60 means integrity and insulation for 60 minutes in the tested arrangement and the installation has to match the test.
What sealant work can’t fix
Some faults sit outside our scope, and we say so rather than covering them up:
- Approving the work on behalf of building control
- Reviewing a building’s overall fire safety
- Large openings beyond what any sealant detail covers
If you are not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Surfaces we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
Why act early in Liquo
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. Renewing every failing joint on one visit is the sensible approach for a place like Liquo. Send photos and we’ll quote for everything together.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why us?
- Products installed to the manufacturer’s instructions
- Sealing commercial buildings since 2005
- Constructionline member
- Fully insured, including public liability cover
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Include service cupboards in routine inspections
- Treat an open penetration as a priority repair
- Brief every trade that openings they make must be sealed
- Agree the fire-stopping specification before services go in
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.