
Fire Stopping in Wishaw
Work needed on a service penetration in Wishaw? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Service penetrations left open after M&E works
- Open linear gaps along the top of fire-resisting walls
- Damaged fire seals in risers and voids
Fire stopping for Wishaw sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Wishaw, done properly
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. Most enquiries involve unsealed joints where partitions meet the slab and damaged fire seals in risers and voids, across service gaps in risers, joints between fire-resisting walls and floors and linear gaps at wall heads. Searching for sealant specialists in Wishaw? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Towns the size of Wishaw have schools, care homes, health centres and offices divided into fire compartments. The Scottish Technical Handbook expects penetrations to be fire stopped to the wall or floor’s fire resistance duration, using products tested for how they’re actually used.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.

- Location
- Wishaw (ML2, ML1)
- Region
- North Lanarkshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Common questions from Wishaw clients
Will you take on work at estates like Netherton Industrial Estate, close to Wishaw?
Yes. We cover Wishaw and the area around it, including industrial estates, business parks and retail parks such as Netherton Industrial Estate. To start, just phone 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Can you work on a hospital site such as University Hospital Wishaw?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How long does a typical visit take?
It depends on the scope, but the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can the sealant be colour-matched?
It depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Do you need to see the site first?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs normally get a visit.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
What does an EI 60 rating mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Results are classified under BS EN 13501-2. That rating only holds when the product is installed to its tested detail.
What affects the price in Wishaw
Each job is priced on its own details. The main factors are:
- How accessible the joints are
- Removal of failed or old sealant
- Backing rod, priming and other preparation
- The site’s rules and procedures
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What to include in your enquiry
We can often quote from photographs and a few details. Please tell us:
- Your programme or deadline
- Drawings or a marked-up plan, if available
- Specification clauses that apply
- Whether the building will be occupied during the work
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Do you need fire stopping in Wishaw?
Openings in fire-resisting walls usually appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
Site and facilities staff are often the first to spot these:
- Unsealed openings around new pipes and cables
- Non-fire-rated filler around services
- Openings found when ceilings come down for a refit
- Open linear gaps along the top of fire-resisting walls
For a unit at a site such as Netherton Industrial Estate, which lies west of Wishaw, new power or data runs between office and warehouse can breach a compartment wall.
What your quote should include
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
- Their pre-qualification and accreditations
- What site paperwork they can supply
Why it’s worth doing now in Wishaw
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is normally a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. If one joint has failed on a building in Wishaw, its neighbours, laid at the same time, may not be far off. One programme for all of them saves time.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
Why choose Mastic Doctor in Wishaw
- Failed material removed, not covered up
- Products installed to the manufacturer’s instructions
- CHAS accredited contractor
- 12-month guarantee on workmanship
Read what affects the cost and our accreditations and insurance.
Fire-rated sealing for Wishaw buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
Workshops and IT rooms at colleges like New College Lanarkshire - Motherwell Campus, 1.9 miles west of Wishaw, are re-serviced often, leaving penetrations to seal. Older community buildings such as Old Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Wishaw is about 6 miles east of Hamilton, in North Lanarkshire. We cover Wishaw and the rest of North Lanarkshire, with the same fixed quotes and 12-month guarantee as everywhere else. Wishaw is one of 100 places in North Lanarkshire on our list. For work in that direction, see our Glasgow page.
We cover the ML2 and ML1 postcode districts for service penetrations. Among the streets we cover are Main Street, Market Square and Station Road. Being close to the A71 and A721, Wishaw is straightforward for us to reach. Just outside Wishaw, we also work in Pather (1 mile south), Dimsdale (1 mile south-east), Coltness (1 mile north), Gowkthrapple (1 mile south) and Netherton (1 mile south-west). Further afield, our area takes in Motherwell (3 miles north-west), Cumbernauld (12 miles north), Coatbridge (7 miles north-west), Airdrie (7 miles north), Bellshill (5 miles north-west) and Kilsyth (15 miles north). As one of the bigger centres in North Lanarkshire, Wishaw has a broad mix of commercial, public and industrial buildings, and we cover them all.
Landmarks near Wishaw
Around Wishaw, our work takes us to commercial buildings near The Wishaw Malt pub and St. Aidan's Primary School and the streets around them. There’s a railway station in Wishaw itself: Wishaw station. A little further out are Murdostoun Castle (2.1 miles north-east) and Brandon Shopping Centre (2.9 miles west). The countryside around Wishaw includes Allanton House lake and Baron's Haugh RSPB Reserve.
More services for Wishaw
What the job involves on each surface
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.
Plastic pipes
Plastic pipes soften and collapse in a fire. Small sizes are sometimes covered by an intumescent sealant detail, though larger ones normally call for a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Diagnose, treat, sign off
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs in Wishaw are planned with two things in mind: the forecast for external joints and the building’s hours for internal ones. Photos or drawings let us give a fixed quote and a realistic plan.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Point out any areas we must not close
- Flag any permit to work we’ll need
- Send your site hours and access windows
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.