Fire stopping in Shotts
Fire stopping in Shotts, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Seals that don’t match their tested detail
- Penetration schedules that need working through
- Openings left by services added after handover
Fire stopping across Shotts
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Shotts
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and we say so if it doesn’t fit. If you have fire stopping installed outside its tested range and head-of-wall gaps with no fire seal, we can put it right, on small duct penetrations where the tested detail allows, pipe penetrations and cable penetrations alike. A single leaking joint is often how a building in Shotts first comes to us: we look at the rest while we’re there and tell you what we find.
Travel to smaller places like Shotts is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Location
- Shotts (ML7)
- Region
- North Lanarkshire
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Problems stay small when the joints are checked regularly. In particular:
- Keep product data and details in the fire safety file
- Check with the data sheet before painting over fire sealant
- Include service cupboards in routine inspections
- Make fire stopping part of every scope that crosses a fire-resisting wall
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
Our process
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Tell us who will meet us and how to get in at your building near Shotts. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Warn occupants and staff about the work
- Explain the parking and delivery arrangements
- Tell us which areas need to stay in use
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Advice
Other services in Shotts
Shotts: questions and answers
Is Shotts too small for you to travel to?
No. Places such as Shotts are covered as much as the big towns. Every Scottish council area is within our area. Good photos up front let us bring everything on the first visit.
How do the Scottish rules apply to fire-rated sealing in Shotts?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
Can staff carry on working while you are here?
In the majority of cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Can you quote from photos?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.
Fire-rated sealing for Shotts buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Hotels such as Station Hotel (less than half a mile south-west of Shotts) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Large healthcare estates like Cleland Hospital, 4.5 miles west of Shotts, change their services often, so penetration seals are worth checking after M&E work. Where a unit on an estate such as Glenburn Industrial Estate, less than half a mile to the north-east of Shotts, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Shotts is about 6 miles north-east of Wishaw, in North Lanarkshire. Anywhere in ML7, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across North Lanarkshire, 100 places are covered, Shotts among them. Sites around Glasgow have their own page, about 19 miles away.
We cover the ML7 postcode districts. For a building on Station Road, Main Street and Regal Grove or nearby, send details and we’ll quote for service penetrations. Nearby places we also cover include Burnbrae (1 mile south), Torbothie (1 mile east), Springhill (1 mile south-east), Eastfield (3 miles north-east) and Harthill (3 miles north-east). Further afield, our area takes in Motherwell (7 miles west), Cumbernauld (12 miles north-west), Coatbridge (9 miles west), Airdrie (8 miles north-west), Wishaw (6 miles south-west) and Bellshill (9 miles west).
Local landmarks in Shotts
There’s a railway station in Shotts itself: Shotts station. Other landmarks nearby include Murdostoun Castle (3.5 miles south-west) and Shotts Heritage Centre (less than half a mile east). Not far away are Allanton House lake.
How the job changes by surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest against the detail’s limits.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, with no gaps along the run.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Plastic pipes whose detail calls for a collar or wrap
- Construction that lacks the fire resistance the seal relies on
- Fire risk assessments, a job for a competent assessor
If in doubt, ring 01277 525 020 or email the details over and we’ll say what we think before you book.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
For managing agents and facilities managers
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Shotts can form part of a wider programme across North Lanarkshire.