Fire Stopping in Hartwood
Planning work on a service penetration in Hartwood? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Openings left by services added after handover
- Snag lists that include open service penetrations
- Seals disturbed by maintenance and left open
Fire stopping for Hartwood sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Quoting for work in Hartwood
Quotes vary with the job. It mainly depends on:
- Access and working height
- Whether old sealant has to be cut out first
- Site requirements such as inductions and permits
- Quantities, in metres or numbers
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Sending details for a quote
Good information means a firmer quote. Helpful details to send:
- Where the site is, with the postcode
- Any specification or named product
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
To get a fixed quote, give us a call on 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.
Fire stopping in Hartwood, done properly
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. Most enquiries involve fire-rated sealant that has cracked or shrunk back and snag lists that include open service penetrations, on service gaps in risers, pipe penetrations and small duct penetrations where the tested detail allows. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Hartwood it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places such as Hartwood, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Hartwood (ML7)
- Region
- North Lanarkshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Other services in Hartwood
When to call us in Hartwood
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
These are often picked up first by site or facilities staff:
- Open linear gaps along the top of fire-resisting walls
- Seals disturbed by maintenance and left open
- Snag lists that include open service penetrations
- Improvised or mixed-product fire seals
For a unit at a site such as Glenburn Industrial Estate, which lies east of Hartwood, new power or data runs between office and warehouse can breach a compartment wall.
What to look for in a quote
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Proof of insurance
- Is the sealant right for the movement and the substrate?
- Whether primer will be used where the manufacturer specifies it
Hartwood: questions and answers
Is hospital work, at somewhere like Cleland Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Hartwood too far out for you?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
Will fire-rated sealant work on every penetration?
No. It depends on the tested detail for that wall or floor and service. Large openings, many plastic pipes and some ducts need collars, wraps, batts or boards, and we flag those rather than improvise.
Do you design or specify fire stopping?
No, that isn’t our role. With the designer’s details in hand, we can price the sealant elements.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
What do you charge?
There isn’t a price list, as every site differs. Send photos or drawings and we’ll price it at a fixed figure.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What the job involves on each surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on and we confirm each before sealing.
From enquiry to sign-off
Working in a building that stays open takes some planning. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs near Hartwood are often grouped with others in the same area. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Tell us which areas need to stay in use
- For older buildings, check the asbestos register before work
- Let us know about inductions and permits
Quotes
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email drawings and photos.
Related advice
What happens if it’s left?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Around smaller places like Hartwood, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- One number for every site we cover
- Work to your specification and the manufacturer’s guidance
- Sealing commercial buildings since 2005
- 12-month guarantee on workmanship
See our cost guide or our accreditations.
Where services cross fire walls in Hartwood
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
Hospital estates such as Cleland Hospital (2.8 miles west of Hartwood) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Hartwood is about 4 miles north-east of Wishaw, in North Lanarkshire. We send applicators to Hartwood for service penetrations. We work across 100 places in North Lanarkshire, from busy centres to rural villages. Our Glasgow page has more on work in that area (17 miles or so).
Business premises anywhere in ML7 are within our area. Buildings on Home Farm Road, Hartwood Road and Canthill Gardens are within our area for service penetrations. If your building is just outside Hartwood, we cover Liquo (1 mile south), Allanton (1 mile south), Bonkle (2 miles south-west), Burnbrae (2 miles east) and Shotts (2 miles east). A short drive away, we cover Motherwell (6 miles west), Cumbernauld (11 miles north-west), Coatbridge (8 miles west), Airdrie (6 miles north-west), Wishaw (4 miles south-west) and Bellshill (7 miles west).
Local landmarks in Hartwood
There’s a railway station in Hartwood itself: Hartwood station. Nearby you will also find Cleland Hospital (2.8 miles west) and Shotts Heritage Centre (1.9 miles east). For a walk, there’s Allanton House lake.
General trades versus a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.