South East England and London
Expansion Joint Sealing in Brighton and Hove
We cover 29 towns and villages across Brighton and Hove for expansion joint sealing, with failed joints always cut out and a 12-month guarantee on our workmanship.
Book expansion joint sealing in Brighton and Hove
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Towns we cover in Brighton and Hove
Expansion and movement joint sealing in walls, decks and floors. Pick your town below to see the details for your area, and call or email us for a quote.
Largest places
More services in Brighton and Hove
- Mastic sealing for building owners and managing agents
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Industrial and floor joint sealing
- Facade and window perimeter sealing
- Commercial sealant contractors
- Construction and new-build mastic
- Coloured and colour-matched sealant
Postcode areas we cover
Expansion joint sealing in Brighton and Hove: how it works
If you need expansion joint sealing in Brighton and Hove, start with photos and joint lengths. Send them through our quote form, and we will arrange a site visit if needed, then send a fixed quote that names the sealant. To discuss the joints first, call 01277 525 020 or send details through our quote form. We work on precast concrete panel joints, blockwork control joints and podiums and floor movement joints, and the failures we are asked to look at most are arrises breaking up along floor joints and hardened, cracked sealant on exposed facades.
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Finished joints are checked and backed by our 12-month guarantee.
How we quote
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we will explain how it’s made up.
Why choose Mastic Doctor
- A Constructionline member, so easy to vet
- One contact handling all your sites
- Fully insured
- Work to your specification and the manufacturer’s guidance
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call 01277 525 020 or email the details over with what you know.
Landmarks near Brighton
In Brighton, that means premises near Fairlight Primary School, St Martin's Church and Park Crescent pub and the streets around them. You will also find Brighton Hove and Sussex Sixth Form College (0.9 miles west), Academy of Creative Training (0.9 miles south) and William Clarke Park (under half a mile east). There’s a railway station in Brighton itself: London Road (Brighton) station. Well-known places in the area include Brighton General Hospital (0.7 miles east) and Old Police Cells Museum (1 mile south-west). Not far away are Newmarket Hill and Whitehawk Hill.
Estates, car parks and floors in Brighton and Hove
From Brighton, Hove and Carlton Hill to smaller places, Brighton and Hove has buildings and slabs with movement joints that need resealing as they age. When they fail, water and grit get in and the edges start to break.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, so jobs in Brighton and Hove are planned with access, loading and parking in mind. In the parts of Brighton and Hove near the sea, the elevations facing the weather are where sealant gives up first.
Brighton: Another example is Pavilion Retail Park, 0.6 miles north-east of Brighton, where floors and yards would be done in stages around the occupiers. For an occupier at a site such as Centenary Industrial Estate, less than half a mile north of Brighton, the joints at loading doors and dock levellers typically see the hardest wear.
Common problems we fix in Brighton and Hove
Weathering wears down sealant on exposed elevations and decks. In time the bead chalks, stiffens and cracks.
It’s worth sending us details if you spot any of the following:
- Spalled or broken joint edges in floors and decks
- Car park joints leaking onto vehicles below
- Torn sealant in brick or block movement joints
- Layers of sealant in a movement joint
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Owners, agents and contractors
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
What affects the price in Brighton and Hove
We price every job individually. The main factors are:
- How much there is to seal
- Travel to remote or island sites
- Which sealant the job calls for
- The site’s rules and procedures
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Sending details for a quote
A good diagnosis starts with the right details. Let us know:
- What the building is and how it’s used
- Drawings or a marked-up plan, if available
- How the joints are reached, and at what height
- Any dates the work must fit around
For a fixed quote, call 01277 525 020 or use the quote form with the site address and an outline of the work. You can also send details through our quote form.
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Note which joints were done, when, and with what
- Reopen bays and walkways only after the stated cure time
- Keep stones and debris out of open joint lines
- Put movement joints on the planned maintenance inspection round
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check, when they’re still cheap to deal with. If anything looks wrong, call the office on 01277 525 020 or email a schedule or drawings with photos.
Rain gets into walls through torn brick and block movement joints. The first sign is often a damp patch indoors. Resealing promptly prevents internal damage.
FAQs: Brighton and Hove
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, let us know and we will send them with the quote.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Will you come and look before quoting?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.
Do you cover Brighton and Hove?
Yes. We cover Brighton and Hove, within our coverage of Greater London, South East England and Scotland. For a quote, call 01277 525 020 or send details through our quote form.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Can a joint be sealed if the edges are broken?
Sealant needs sound faces to bond to, so we will tell you if the edges need repairing before sealing. Where it’s visible beforehand, we will say so when we quote.