Hollingbury expansion joint sealing
Work needed on a movement joint in Hollingbury? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Rain penetration at brick or block movement joints
- Arrises breaking up along floor joints
- Movement joints with split or torn sealant
Expansion joint sealing for businesses in Hollingbury
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing around Hollingbury: how the place shapes the job
Hollingbury sits close to the coast, within about 3 miles. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. At least three named trading, business or retail sites lie within about 3 miles of Hollingbury. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Large sites such as Brighton General Hospital (2.1 miles south of Hollingbury) have car parks, service roads and long elevations with movement joints in brick and panels. At a retail site such as Pavilion Retail Park, 1.3 miles to the south of Hollingbury, trolleys, cages and cars run over floor and slab joints all day. University campuses such as University of Brighton Moulesecoomb Campus, 1.2 miles to the south-east of Hollingbury, have car parks, paved walkways and building elevations with movement joints.
Hollingbury is about 2 miles north of Brighton, in Brighton and Hove. Looking for expansion joint sealing in Hollingbury? We can help. Our Brighton and Hove coverage takes in 29 places, from busy centres to rural villages.
Commercial sites across BN1 are covered for movement joints. We cover commercial and managed buildings on Keymer Road, Warmdene Road and Carden Avenue. Just outside Hollingbury, we also work in Patcham (1 mile west), Withdean (1 mile south-west), Hollingdean (1 mile south), Preston (1 mile south-west) and Westdene (1 mile west). Further afield, our area takes in Brighton and Hove (3 miles south-west), Hove (3 miles south-west), Brunswick (3 miles south), Portslade (4 miles west), Kemptown (3 miles south) and Whitehawk (3 miles south-east).
Near you in Hollingbury
Recent enquiries here include premises near University of Sussex Library, Patcham High School and Wild Park. Nearby too are The Dharma Primary School (0.5 miles north-west) and County Oak pub (less than half a mile north-east). The closest station to Hollingbury is Moulsecoomb station, about 1.1 miles south-east of the centre. Nearby you’ll also find Brighton General Hospital (2.1 miles south) and Churchill Square (2.6 miles south). Green spaces nearby include Ladies Mile and Ditchling Beacon.
Expansion joint sealing for commercial buildings in Hollingbury
The seal is what lets a movement joint do its job. Once it fails, water, grit and debris get in. Resealing at the first signs of failure is far cheaper than repairing the material either side. The enquiries we see most involve brittle, chalky sealant on external joints and water dripping through deck or ramp joints, across car park decks and ramps, cladding panel joints and brickwork movement joints. Whoever orders the work in Hollingbury, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Small units near places like Hollingbury are often converted farm buildings with new concrete floors. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Hollingbury (BN1)
- Region
- Brighton and Hove
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Owners, agents and contractors
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, with CSCS-carded applicators on site.
FAQs: Hollingbury
Can being near the sea in Hollingbury affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Is Hollingbury too far out for you?
No. Places such as Hollingbury are covered as much as the big towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Do the joint edges need to be sound before sealing?
Spalled edges need repairing before a new seal will last. Sealing over them leads to early failure.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.
How long does movement joint sealing take?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. As a guide, it typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
What happens if it rains on the day?
Weather matters for any external joint. Indoor joints can usually carry on regardless.
What happens if it’s left?
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed, and we’ll say so before quoting. A failed joint lets water into a building whatever its size. Catching it early means a reseal rather than repairs.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why choose Mastic Doctor in Hollingbury
- CHAS accredited contractor
- Sealing commercial buildings since 2005
- Colour options checked against the specified product
- RAL and finish matching where the product range allows
Take a look at our cost guide or our accreditations and insurance.
Also near Hollingbury
More services for Hollingbury
Cost factors for movement joints
Each job is priced on its own details. The things that drive the figure:
- Removal of failed or old sealant
- Whether the work must be split into stages
- Access and working height
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Sending details for a quote
A few photographs plus some basic facts will normally do. Please tell us:
- The product your specification calls for
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
- Clear photographs of the problem areas
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, ring 01277 525 020 or use the quote form.
When to bring in a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Surface by surface
Podium joints
Podium decks are exposed and often trafficked. We choose a product that copes with feet, wheels and weather.
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement flagging broken arrises before sealing.
Diagnose, treat, sign off
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. What matters most for a job in Hollingbury is a clear list of what needs doing, so send photos of each area. A fixed quote follows.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Share the asbestos register for older buildings
- Arrange parking or a loading space
- Share your working hours and any access restrictions
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.