Expansion joint sealing in Hollingdean
Need expansion joint sealing in Hollingdean? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Damp inside where a wall movement joint has failed
- Debris jammed in movement joints
- Water dripping through deck or ramp joints
Expansion joint sealing for Hollingdean sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Hollingdean
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. Most enquiries involve sealant pulling off the joint face and chipped joint edges on forklift routes, on car park decks and ramps, precast concrete panel joints and podiums and floor movement joints. For commercial sealant work in Hollingdean, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around Hollingdean, most floor and movement joint jobs are single buildings or yards. That way the right materials come on the day and the job is done in one visit where possible.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Where
- Hollingdean (BN1, BN2)
- Region
- Brighton and Hove
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Joints that move: notes for Hollingdean
Hollingdean lies within about 2 miles of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. The South East is one of the drier parts of the UK. External joints still wait for dry conditions, while winter salting gets into any joint left open.
Phasing is what makes joint work possible on busy sites such as Centenary Industrial Estate (under half a mile south of Hollingdean): one bay, aisle or car park row at a time. Retail parks like Pavilion Retail Park, less than half a mile to the south-east of Hollingdean, have long runs of car park and yard joints taking daily traffic.
Hollingdean is about 1 mile north of Brighton, in Brighton and Hove. Anywhere in BN1, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Hollingdean is one of 29 places we cover in Brighton and Hove for movement joints.
We cover the BN1 and BN2 postcode districts. Buildings on Mayo Road, Dewe Road and Rugby Road are within our area. If your building is just outside Hollingdean, we cover Brighton (1 mile south), Preston (1 mile west), Moulsecoomb (1 mile east), Prestonville (1 mile south-west) and Hanover (1 mile south). Further afield, our area takes in Brighton and Hove (3 miles west), Portslade (4 miles west), Aldrington (3 miles west), Hangleton (3 miles west), Saltdean (5 miles south-east) and Roedean (3 miles south-east).
Landmarks near Hollingdean
Around Hollingdean, our work takes us to commercial buildings near Varndean School, William Clarke Park and The Pub at Fiveways and the streets around them. Hollingdean’s nearest station is Moulsecoomb station, roughly 0.5 miles east. A little further out are Brighton General Hospital (1.1 miles south-east) and Clayton Castle (4.6 miles north). Open spaces near Hollingdean include Newmarket Hill and Bevendean Down.
After the work
A few simple habits keep the new joints working:
- Put movement joints on the planned maintenance inspection round
- Keep stones and debris out of open joint lines
- Act on the first tear or lifting edge rather than waiting
- Avoid parking heavy plant or pallets on joint lines
Fresh joint sealant needs its full cure time before it takes traffic or water. The time varies with product, conditions and joint depth. Barriers left in place until then protect the finish.
Rain gets into walls through torn brick and block movement joints. It can surface inside as damp a long way from the joint by which time the joint has been open for a while. Catching it early keeps the water outside.
Different surfaces, different methods
Brickwork and blockwork joints
Mortar snots and debris in the joint stop it working. We clear the joint fully before sealing.
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. We use a sealant classed for the movement, laid over backing to depth.
Leave it or put it right?
Spot repairs can be useful on a tight budget. The remaining sealant is often close to failing too and repeated access costs add up. Where it helps, we quote both options. For buildings in places like Hollingdean, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
Pricing movement joints depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
Why choose Mastic Doctor in Hollingdean
- One contact handling all your sites
- A range of standard colours, depending on the product
- Colour agreed before work starts
- CHAS accredited contractor
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Signs you need expansion joint sealing in Hollingdean
Sealant peeling cleanly off one side is an adhesion failure. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons and it often shows on rushed work.
Site and facilities staff are often the first to spot these:
- Rain penetration at brick or block movement joints
- Sealant pulling off the joint face
- Debris jammed in movement joints
- Torn sealant in brick or block movement joints
Campuses like University of Brighton Moulesecoomb Campus (to the east of Hollingdean) mix old and new buildings, with movement joints wherever they meet.
Comparing quotes
- Are they CHAS accredited or on Constructionline?
- Whether their applicators hold CSCS cards
- How joint depth will be controlled
- Whether old or failed sealant will be cut out, not overlaid
Questions about Hollingdean
Can you take on a job at a hospital such as Brighton General Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Does the sea air around Hollingdean change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Is Hollingdean in your area?
Yes. Hollingdean falls within our area, and you can call the office on 01277 525 020 or send details through our quote form to get started.
What sealant do you use in movement joints?
We choose a sealant with a movement capability that suits the joint as set out in BS EN ISO 11600. Hybrid or MS polymer products suit some mixed-material joints.
Do the joint edges need to be sound before sealing?
Sealant needs sound faces to bond to, so we will tell you if the edges need repairing before sealing. We flag it at the quote stage where we can see it.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can staff carry on working while you are here?
Yes, as long as we plan it. Tell us your site hours and access windows and we’ll plan around them.
General trades versus a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Also near Hollingdean
What else we do in Hollingdean
Our process
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. If neighbouring businesses or buildings around Hollingdean need work too, visits can be combined. Tell us your site hours and we will plan around them.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
What we need from you
- Share your working hours and any access restrictions
- Tell staff and tenants when we’ll be in
- Send asbestos survey details if the building is pre-2000
Request a quote
To get a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. You can also send details through our quote form.