Expansion Joint Sealing in Moulsecoomb
Expansion joint sealing in Moulsecoomb, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Rain penetration at brick or block movement joints
- Sealant peeling off one face of the joint
- Torn sealant in brick or block movement joints
Expansion joint sealing near Moulsecoomb
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Looking after the joints
To get the most from the new sealant:
- Report split or peeling joint sealant early
- Avoid parking heavy plant or pallets on joint lines
- Record the sealant used and the date in the O&M file
- Look over external and deck joints after a hard winter
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines and flag chipped arrises before they spread.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors, well after the seal first opened. Catching it early keeps the water outside.
Expansion joint sealing in Moulsecoomb
For movement joints in Moulsecoomb, photos and approximate lengths are the best start. Send them through our quote form, and we will arrange a site visit if needed before issuing a fixed quote. To discuss the joints first, phone 01277 525 020 or email us. We work on precast concrete panel joints, blockwork control joints and car park decks and ramps, and what we are called in for most is leaks through car park deck joints onto the level below and sealant peeling off one face of the joint. A specialist sealant contractor works differently from a general builder: in Moulsecoomb, that means joint design, primers and backing rod as standard.
Small units near places like Moulsecoomb are often converted farm buildings with new concrete floors. Joints in those slabs need a product suited to whatever runs over them, from pallet trucks to foot traffic.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Moulsecoomb (BN2, BN1)
- Region
- Brighton and Hove
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Moulsecoomb
Does a coastal location like Moulsecoomb affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can you work on a hospital site such as Brighton General Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Different surfaces, different methods
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. The right filler or sealant for the traffic and movement protects them flagging broken arrises before sealing.
Concrete and precast panel joints
Precast and concrete panel joints move daily. We use a sealant classed for the movement, laid over backing to depth.
Building owners, agents and FMs in Moulsecoomb
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Places near Moulsecoomb
Also in Moulsecoomb
Cost factors for movement joints
What shapes the price:
- How much there is to seal
- Distance, for remote addresses
- Whether the work must be split into stages
- Any access equipment needed
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What to include in your enquiry
Diagnosis starts before we arrive. Let us know:
- Specification clauses that apply
- Any dates the work must fit around
- A wide shot and a close-up of the area
- Access details, including height
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email us with what you know.
When to call us in Moulsecoomb
Three-sided adhesion is a common cause of early failure. Bonded on three faces, it can’t stretch evenly when the joint opens.
If one of these sounds familiar, it’s time for a closer look:
- Water dripping through deck or ramp joints
- Joints where the bead has lost adhesion
- Damp inside where a wall movement joint has failed
- Expansion joints filled with dirt and stones
For estates staff at a university like University of Brighton (less than half a mile west of Moulsecoomb), building and paving joints are part of the planned maintenance list.
What to look for in a quote
- How they’ll work around occupants
- Proof of insurance
- How joint depth will be controlled
- Whether old or failed sealant will be cut out, not overlaid
Joints that move: notes for Moulsecoomb
Moulsecoomb sits close to the coast, within about 3 miles. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. At least three named trading, business or retail sites lie within about 3 miles of Moulsecoomb. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Large sites such as Brighton General Hospital (1.1 miles south of Moulsecoomb) have car parks, service roads and long elevations with movement joints in brick and panels. Parks like Home Farm Business Park (to the north-west of Moulsecoomb) combine paved areas, car parks and building elevations, each with joints that move.
Moulsecoomb is about 1 mile north-east of Brighton, in Brighton and Hove. Businesses, contractors and managing agents in Moulsecoomb use us for work on movement joints. Moulsecoomb is one of 29 places in Brighton and Hove on our list.
Anyone looking for expansion joint sealing in BN2 and BN1 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Natal Road, Lewes Road and The Avenue or close by, send details and we’ll quote for movement joints. If your building is just outside Moulsecoomb, we cover Bevendean (1 mile south-east), Hollingdean (1 mile west), Hollingbury (1 mile north-west), Brighton (1 mile south-west) and Hanover (1 mile south-west). Further afield, our area takes in Brighton and Hove (4 miles west), Hove (3 miles west), Portslade (5 miles west), Aldrington (4 miles west), Hangleton (4 miles west) and Saltdean (4 miles south-east).
What’s near Moulsecoomb
We work on buildings around The Bevy pub, University of Sussex Library and Brighton Aldridge Community Academy and the streets around them. Moulsecoomb has its own railway station: Moulsecoomb station. A little further out are Churchill Square (2.3 miles south-west) and Clayton Castle (4.6 miles north). Green spaces nearby include Bevendean Down and Newmarket Hill.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and we clear our waste as we work. What matters most for a job in Moulsecoomb is a clear list of what needs doing, so send photos of each area. A fixed quote follows.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Before we start on site
- Arrange parking or a loading space
- Make sure the joints can be reached
- Let building users know which areas are affected
Getting a fixed quote
To get a fixed quote, ring 01277 525 020 or email the details over, telling us the site location and the nature of the job. Our quote form is another easy route.