The Mastic Doctor team standing beside their branded vans outside an office building
Dundee · Scotland

Logie floor joint sealing

Commercial sealant work in Logie for contractors, FMs and building owners: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.

  • Filler that has parted from one face
  • Scruffy, dirty joint lines on a shop or showroom floor
  • Brittle joint filler breaking up
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m PL insurance

Floor joint sealing across Logie

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

When it isn’t the sealant

Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:

  • Level or flatness problems across the floor
  • Damaged or worn floor coatings and screeds
  • Wide or random cracking that suggests a structural issue

Not sure which it is? You can ring 01277 525 020 or send photos by email and we’ll tell you honestly.

Joints and surfaces we work on

  • Joints along racking aisles
  • Construction joints
  • Saw-cut induced joints
  • Retail and showroom floors
  • Loading bays
  • Forklift and pallet-truck routes

About our floor joint sealing in Logie

Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so we’ll tell you if the joint edges need repairing first and leave that decision with you. Most enquiries involve trucks and loads jolting over damaged joints and sealant pulled out along a truck route, on construction joints, joints along racking aisles and saw-cut induced joints. A specialist sealant contractor works differently from a general builder: on jobs in Logie, preparation and product choice get the time they need.

Scotland’s cities have multi-storey car parks, shopping centres, university and hospital estates, all with movement joints in decks, floors and walls. When the sealant goes, water and grit get in, and a Scottish winter makes it worse.

Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Logie (DD2, DD1, DD3)
Wider area
Dundee
Cover
A 12-month guarantee
Quote
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026

Why it’s worth doing now in Logie

Dirt and spillage gather in open joints where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. In a Scottish city, access often needs scaffold, permits or factor approval, so deal with all failing joints while access is up.

The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.

What you get with us

  • One contact handling all your sites
  • Sealing commercial buildings since 2005
  • Fixed quotes based on photos, drawings or a visit
  • CHAS accredited contractor

See what affects the cost or our accreditations.

Our process

Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we’ll work to them.

  1. A floor survey records every joint, its edges and what crosses it.
  2. The treatment and the zones are set out in a fixed quote.
  3. Old fill and packed debris come out until both faces are sound.
  4. We extract the dust and prime the faces if the product needs it.
  5. Filler or sealant is placed to depth and finished flush.
  6. We hand each phase back when it can take traffic.

Before we start on site

  • Point out any areas we must not close
  • For older buildings, check the asbestos register before work
  • Point out parking and an unloading spot

Request a quote

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.

Get a quick quote

Advice

Different surfaces, different methods

Retail and showroom floors

Retail joints see trolleys, footfall and scrubber-driers. We pick a filler or sealant to suit and the finish matters as much as the performance.

Isolation joints at walls and columns

Isolation joints separate the slab from walls, columns and plinths so it can move independently. Something flexible normally suits them, not a stiff filler.

Quoting for work in Logie

Your fixed quote is built from the real scope. It allows for:

  • Site requirements such as inductions and permits
  • How much there is to seal
  • Specialist products, such as fire-rated or hygienic sealants
  • Whether the work must be split into stages

Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.

What we need to price the job

To price the job accurately, we need a clear picture of the site. Useful things to include:

  • Any specification or named product
  • The type of building and who uses it
  • Access details, including height
  • The postcode of the building

If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.

Floors, slabs and movement joints in Logie

Logie sits close to the coast, within about 1 mile. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. The 3 miles around Logie take in at least three named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.

A campus such as University of Dundee, 0.8 miles to the east of Logie, has long runs of movement joint in its buildings, decks and paving. If you manage units on an estate such as Mid Wynd Industrial Estate, which lies south-east of Logie, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch. Large sites such as Royal Victoria Hospital (to the west of Logie) have car parks, service roads and long elevations with movement joints in brick and panels.

Logie is about 1 mile south-west of Dundee, in Dundee. We cover Logie and the rest of Dundee, with the same fixed quotes and 12-month guarantee as everywhere else. Logie is one of 28 places we cover in Dundee.

We cover the DD2, DD1 and DD3 postcode districts. For a building on City Road, Ancrum Road and Tait's Lane or nearby, send details and we will quote for floor joints. We also cover Balgay (1 mile north-west), Lochee (1 mile north), Menzieshill (1 mile west), Dryburgh (1 mile north-west) and Ninewells (1 mile west). Further afield, our area takes in Broughty Ferry (5 miles east), Barnhill (6 miles east), Pitkerro (3 miles north-east), Whitfield (3 miles north-east), Douglas (4 miles east) and Mill of Mains (3 miles north-east).

Local landmarks in Logie

Locally, jobs take us to sites close to Dundee School of Architecture, The Hawkhill Tavern and Balgay Hill, among other places. Logie’s nearest station is Dundee station, about 1.3 miles east of the centre. Nearby you’ll also find Dudhope Castle (0.7 miles east) and Tayside Medical History Museum (under half a mile east). Open spaces near Logie include Balgay Hill and Trottick Mill Ponds.

Map of Logie © OpenStreetMap contributors

Your questions answered

Do you take on work at healthcare sites like Royal Victoria Hospital?

Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

Will you take on work at estates like Mid Wynd Industrial Estate, close to Logie?

Yes. We cover Logie and the area around it, including industrial estates, business parks and retail parks such as Mid Wynd Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.

Do you repair broken joint edges?

Edge condition is recorded when we look at the floor. Damaged edges are flagged up front, so nothing is filled that won’t hold.

Do you work in Logie?

Yes. We cover Logie, and the simplest way to start is to ring 01277 525 020 or send details through our quote form.

What guarantee do you give on joint filling?

A 12-month guarantee covers the work we do. It applies to our workmanship rather than structural movement or accidental damage.

Should floor joints be filled or sealed?

We decide joint by joint. Hard wheels need edge support, which points to a semi-rigid filler and perimeter or movement joints need flexibility. The quote sets out what goes where.

Is colour matching possible?

Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.

For managing agents and facilities managers

As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.

We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Logie can sit alongside others in a wider programme across Dundee.

Accreditations

Trusted. Accredited. Insured.