Facade and window perimeter sealing in Logie, Dundee
Need facade sealing in Logie? It’s simple: send details, get a quote, we seal, guaranteed.
- Perimeter joints where frames meet the structure
- Facade joints cracked through the middle
- Water coming in around window frames
Facade sealing for Logie sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Mastic packages on Logie sites
Logie sits close to the coast, within about 1 mile. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. In Logie, as across Scotland, building warrants are issued by the local authority verifier under the Scottish regulations. The mastic package follows the approved specification.
Work at a hotel such as Shaftesbury Hotel, under half a mile to the south of Logie, tends to be programmed around bookings, mastic included. For a contractor working at a hospital such as Royal Victoria Hospital, 0.5 miles to the west of Logie, perimeter and facade sealing is planned around patients and deliveries.
Logie is about 1 mile south-west of Dundee, in Dundee. Across the DD2 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Logie is one of 28 places we cover in Dundee for facade joints.
We cover the DD2, DD1 and DD3 postcode districts for facade joints. Streets here include City Road, Ancrum Road and Tait's Lane, and sites on any of them can send details for a fixed quote. We also cover Balgay (1 mile north-west), Lochee (1 mile north), Menzieshill (1 mile west), Dryburgh (1 mile north-west) and Ninewells (1 mile west). A short drive away, we cover Broughty Ferry (5 miles east), Barnhill (6 miles east), Pitkerro (3 miles north-east), Whitfield (3 miles north-east), Douglas (4 miles east) and Mill of Mains (3 miles north-east).
What’s near Logie
We work on buildings around Dundee School of Architecture, The Hawkhill Tavern and Balgay Hill. Logie’s nearest station is Dundee station, roughly 1.3 miles east. Other landmarks nearby include Dudhope Castle (0.7 miles east) and Tayside Medical History Museum (under half a mile east). For a walk, there’s Balgay Hill and Trottick Mill Ponds.
Facade sealing for commercial buildings in Logie
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. Once a perimeter seal fails, water tracks in around frames and panels. We remove failed sealant and install a new bead chosen for the joint and how far it moves. Most enquiries involve air leaks through failed facade joints and sealant pulling away from frames or panels, across stone and brick facade joints, shopfront frames and perimeter joints where frames meet the structure. Facilities teams, main contractors and managing agents in Logie tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Sites in Scottish city centres tend to be hemmed in, with deliveries and storage to plan. We work to the programme and the site rules, with CSCS-carded applicators.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Logie (DD2, DD1, DD3)
- Region
- Dundee
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Providing access systems for the work
- Damaged frames that need replacing
- Leaks from roofs, gutters or failed flashings rather than sealant joints
If in doubt, ring 01277 525 020 or email the details over and we will say what we think before you book.
Surfaces we seal
- Cladding panel joints
- Shopfront frames
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Stone and brick facade joints
Do you need facade sealing in Logie?
Overlaying old sealant is a common shortcut that fails quickly. Cured silicone won’t accept a new silicone bead.
Typical triggers for a call:
- New sealant peeling off old mastic
- Weathered facade joints that have lost their grip
- Failed seals around shopfront and entrance frames
- Gaps between rainscreen or cladding panels
Further education sites such as Dundee and Angus College - Kingsway Campus (1.9 miles north-east of Logie) are extended and refurbished from time to time, with mastic often programmed into the summer break.
Questions to ask before you book
- Will CSCS-carded applicators be on site?
- Can the work be phased to keep areas open?
- Health and safety accreditation such as CHAS
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Our process
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. City jobs in Logie normally need parking and loading planned. Shared closes, stairs and the property factor may need to be part of the plan.
- Access, site rules and timing are settled with the client up front.
- Weather and temperature are checked against the product’s limits.
- Each joint is cut out and the edges inspected.
- Joints are cleaned, primed if required and fitted with backing rod.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- Confirm the product named in the specification
- Let building users know which areas are affected
- Tell us your opening times and when work is allowed
Request a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or email us.
Advice
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Working within restricted access windows
- The product specified
- Any access equipment needed
- How much existing material needs removing
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Any specification or named product
- Approximate linear metres or a joint schedule
- The type of building and who uses it
- Your programme or deadline
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Your questions answered
Does your area include sites such as Mid Wynd Industrial Estate, near Logie?
Yes. Estates, retail parks and business parks around Logie, Mid Wynd Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Would you work within a site like Royal Victoria Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is old mastic on our building likely to contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Check the asbestos register or survey before it is disturbed; if it’s suspected, work stops until it has been tested. Removal of asbestos isn’t something we do.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Do you replace windows or glass?
No. A glazing contractor handles that. What we seal are the joints around frames and panels on commercial buildings.
Can you work on upper floors?
Access is planned with you before we quote. Let us know what access is in place or planned, and the quote will reflect it.