Industrial and floor joint sealing in Aith, Shetland Islands
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Aith and the surrounding area. Send details for a fixed quote.
- Sealant pulled out along a truck route
- Loading bay joints breaking down
- Saw-cut joints left open and packed with grit
Floor joint sealing in Aith
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
From enquiry to sign-off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. For work around Aith, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Preparing the site
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
- Send any specification or drawings in advance
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Floor joint sealing in Aith
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. Site teams most often ask us about dock area joints that have failed first and saw-cut joints left open and packed with grit, on construction joints, joints along racking aisles and saw-cut induced joints. A single leaking joint is often how a building in Aith first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For floor or movement joints around smaller places like Aith, we plan to finish in one visit where we can. Send photographs, joint widths and details of the traffic first.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Place
- Aith (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. Neither is made to carry wheels and traffic soon pulls it out. The right filler or sealant saves doing it twice. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Aith before they leak.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why us?
- One phone line for London, the South East and Scotland
- CHAS accredited contractor
- Fully insured, including public liability cover
- Work carried out by CSCS-carded applicators
Read our cost guide or how we’re accredited.
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is one of these:
- Cracks across panels caused by settlement or overload
- A floor that rocks at the joints, which needs a structural fix
- Damaged or worn floor coatings and screeds
If in doubt, ring 01277 525 020 or email the details over and we’ll say what we think.
Surfaces we seal
- Loading bays
- Retail and showroom floors
- Construction joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Saw-cut induced joints
Your questions answered
Can being near the sea in Aith affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Must our site in Aith stop work while the joints are done?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
Do you work in Aith?
Yes. Sites across Aith are covered, and the same phone number covers every area.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Can you fill joints where the arrises have spalled?
We check the edges as part of the survey. Where they have broken away, we will tell you before quoting the filling, so nothing is filled that won’t hold.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Floor joint sealing in Aith: the local picture
With the shore within about 1 mile, Aith counts as a coastal location. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. Being on an island, Aith means planning around ferry times as well as the weather. Photos and joint sizes help us load the right products.
For floors and slabs around Aith, the product is chosen for the traffic and the movement at each joint.
Aith is in the Shetland Islands. We cover commercial sites throughout Aith. Aith is one of 63 places in the Shetland Islands on our list.
Business premises anywhere in ZE2 are within our area. For a building on Marthastoon and Wirligert or nearby, we can quote for floor joints. You will find Aith on or near the B9071. Just outside Aith, we also work in Kalliness (4 miles south-east), Voe (6 miles north-east), Easter Skeld (7 miles south), Dury (7 miles east) and Vassa (8 miles east). Nearby towns on our patch include Lerwick (12 miles south-east), Sound (12 miles south-east), Scalloway (11 miles south) and Brae (8 miles north). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
What’s near Aith
Not far away are Loch of North-House and Russaness Hill.
What we’re called out for in Aith
A soft, flexible sealant on a forklift route can’t hold the arrises up, so the concrete still breaks beside it. The opposite mistake happens as well: a stiff filler in a joint that keeps moving splits or comes away from the sides.
Clients typically get in touch after noticing something like this:
- Broken arrises where pallet trucks cross
- Brittle joint filler breaking up
- Grimy joint lines spoiling a showroom floor
- Sealant pulled out along a truck route
Around Aith, open joints collect water and debris, and the arrises are the next to go; we will tell you if the edges need repairing first.
Before you book anyone
- The terms of the workmanship guarantee
- Whether old or failed sealant will be cut out, not overlaid
- Who will actually carry out the work
- How they handle RAMS and site documents
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- Walk the main routes and inspect joint lines on a regular cycle
- Plan for a top-up on newer floors
- Record damaged joints with a photo and a location
- Ask drivers not to drag forks or pallets
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time if it keeps happening.
Grit in an open joint does damage every time a wheel crosses it. Getting it filled stops the damage before it becomes a repair.
Should maintenance staff do it?
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.