Shetland Islands · Scotland
Commercial sealant contractors in ZE2
Commercial sealant, construction mastic and joint sealing across ZE2, covering Brae, Sandwick and Baltasound, with a fixed quote before we start.
Mastic and sealant across ZE2
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Areas within ZE2
- Brae
- Sandwick
- Baltasound
- Cunningsburgh
- Gulberwick
- Hamnavoe
- Boddam
- Gott
- Haroldswick
- Mossbank
- North Roe
- Aith
- Firth
- Mid Yell
- Symbister
- Veensgarth
- Voe
- Walls
- Sandwick
- Brough
- Burravoe
- Hamister
- Levenwick
- Clate
- Hoswick
- Bremirehoull
- Tripwell
- Aithsetter
- Aywick
- Bigton
- Camb
- Clivocast
- Cullivoe
- Dury
- Easter Skeld
- Grindiscol
- Gunnista
- Heogan
- Hillswick
- Hogaland
- Houbie
- Huxter
- Kalliness
- Melby
- Ollaberry
- Sandness
- Scatsta
- South Scousburgh
- Sullom
- Toogs
- Urafirth
- Vassa
- Vidlin
- Braehoulland
What we do in ZE2
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Fire-rated sealing and fire stopping
- Facade and window perimeter sealing
- Construction and new-build mastic
- Expansion and movement joint sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Every service
Let us know the job and your postcode and we’ll come back with a price: phone 01277 525 020 or send photos by email.
Neighbouring districts
More in the Shetland Islands
Every town in the Shetland Islands
All areas
About commercial sealant contractors in ZE2
On a commercial site, sealant turns up in more places than people expect: around sanitaryware, along worktops and splashbacks, at window boards, partition heads and floor junctions. Outside, it closes facade joints, frame perimeters and movement joints against the weather. Our applicators work on both the inside and the outside of the building. We work on movement joints in walls and floors, kitchen worktops and splashbacks and window and door perimeters, and the usual reasons a site gets in touch are earlier reseals applied straight onto the failed bead and frame sealant that has cracked, shrunk or pulled away.
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Every failed bead is removed rather than covered.
- Each joint gets a suitable sealant, laid to depth and tooled.
- We check the work with you, and the 12-month guarantee starts.
What affects the price in ZE2
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- One number for every site we cover
- 12 months’ guarantee on every job
- A range of standard colours, depending on the product
- Work carried out by CSCS-carded applicators
Get a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Landmarks near Brae
Not far away are Houlls Water.
Shops, offices and hotels in ZE2
Commercial buildings across ZE2 range from older premises altered many times to recent units on business parks. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
Scotland has its own building regulations, the Building (Scotland) Regulations 2004, with building warrants from the local authority verifier. Our part is sealing to the specification, whatever the building. Along the coast in ZE2, hospitality buildings tend to be busiest in the summer months, which makes the quieter months a good time for sealant work.
Brae: Whatever the building in Brae, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material. A hotel such as The Brae Hotel Shetland (to the south of Brae) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Why deal with it now?
Fixing joints complaint by complaint is a costly way to manage sealant. Planning the work across a year or a portfolio means fewer separate visits and a predictable spend. We can help you prioritise, starting with the joints most likely to let water in.
Questions to ask before you book
- How long is the guarantee, and what does it include?
- How they’ll work around occupants
- Their public liability cover
- How the joint faces will be prepared and primed
Common problems we fix in ZE2
External sealant takes a steady beating from the weather. UV hardens the surface while wind and rain work at the edges, so beads chalk, stiffen and lose their stretch. A hardened bead can’t follow the building any more.
What tends to prompt an enquiry:
- Messy, uneven beads from earlier work that let the building down
- Water staining near frames, panels or ceilings
- Window and door perimeter joints that have cracked open
- Sanitary sealant that has gone black and patchy
Commercial clients in ZE2
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
After the work
Once the work is signed off, these steps help:
- Make sure ventilation in wet areas is switched on and working
- Respect the cure time before reopening an area
- Add sealant to the planned maintenance inspection list
- Ask fit-out and M&E contractors to report any sealant they disturb
Put sealant on the planned maintenance checklist. A periodic look catches splits and lifting edges early, especially on exposed elevations and in washrooms. Should something look amiss, you can ring 01277 525 020 or use the quote form and send a picture.
Each spell of wet weather pushes more water through an open joint. Behind a panel or frame, that water can sit unseen for a long time. Catching it at the sealant stage avoids the bigger repair.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we are upfront when that’s the case. These need a different solution:
- Leaks from pipework, wastes or valves (that’s plumbing)
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- Faulty windows rather than failed perimeter sealant
FAQs: ZE2
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
How is commercial sealant work priced?
Photos, drawings or a schedule of the joints are typically enough to start. If a visit is needed we’ll book one, and a fixed quote follows.
Is ZE2 in your area?
Yes. Sites across ZE2 are covered, with one number for every area we cover.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Can you supply RAMS and insurance details?
Send your site requirements with the enquiry, and the paperwork is confirmed with the quote. From you, we will need the asbestos information for older buildings and any site rules.