Expansion Joint Sealing in Aith
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Aith. Send photos or drawings for a fixed quote.
- Weathered movement joint sealant that no longer flexes
- Layers of sealant in a movement joint
- Water dripping through deck or ramp joints
Need expansion joint sealing in Aith?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Our process
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Tell us who will meet us and how to get in at your building near Aith. That goes into the plan alongside the quote.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Flag any permit to work we will need
- Tell staff and tenants when we will be in
- Point out any areas we must not close
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Related advice
How we handle expansion joint sealing in Aith
We cover the full range of movement joints: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it. If you are dealing with previous reseals laid over old sealant and chipped joint edges on forklift routes, we can put it right. Searching for sealant specialists in Aith? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
For outside joints near Aith, the Scottish weather sets the timetable: dry faces and the right temperature are essential. Internal floors can be done whenever suits the site.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Aith (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Slabs, ramps and loading bays in Aith
Aith lies within about 1 mile of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. The east of Scotland, where Aith is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
A joint near Aith that has lost its sealant lets in water and grit, and the edges suffer next. For floors and slabs around Aith, the product is chosen for the traffic and the movement at each joint.
Aith is in the Shetland Islands. Commercial clients in Aith use us for work on movement joints, as part of our coverage of the Shetland Islands. Our the Shetland Islands coverage takes in 63 places, large and small.
Work on movement joints is covered throughout ZE2, for business premises of every kind. Streets here include Marthastoon and Wirligert, and sites on any of them can send details for a fixed quote. Access to Aith is via the B9071 among other routes, so getting applicators and materials to site is simple. Nearby places we also cover include Kalliness (4 miles south-east), Voe (6 miles north-east), Easter Skeld (7 miles south), Dury (7 miles east) and Vassa (8 miles east) for movement joints. A short drive away, we cover Lerwick (12 miles south-east), Sound (12 miles south-east), Scalloway (11 miles south) and Brae (8 miles north). For island and remote sites, travel and materials need planning ahead.
Around Aith
Open spaces near Aith include Loch of North-House and Russaness Hill.
After the work
After handover, these steps help:
- Act on the first tear or lifting edge rather than waiting
- Avoid parking heavy plant or pallets on joint lines
- Keep traffic off new joints until the cure time is up
- Inspect exposed joints once the cold weather has passed
Every joint we seal is backed by a 12-month guarantee on workmanship. Keep the handover details, product and date with your O&M records.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles. Resealing early limits the damage.
Questions about Aith
Will our site in Aith have to close for joint sealing?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Will you travel to Aith on the island?
Yes, Aith is within the area we cover. We work across every Scottish council area. We group island work where we can and plan around the crossings.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email us. Include photos or drawings if you have them.
Is colour matching possible?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Which product is best for expansion joints?
The specification comes first, then the joint’s movement and exposure. The quote states the sealant and its movement class so there are no surprises.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
What we can’t put right
Being straight saves everyone time. New sealant won’t cure:
- Changing the joint layout or spacing of a structure
- Damaged metal nosings or cover plates over a joint
- Broken or spalled joint edges, which need repairing before any sealant goes in
If you are not sure, just ring 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
What we seal
- Podiums and floor movement joints
- Precast concrete panel joints
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
- Blockwork control joints
What else we do in Aith
Surface by surface
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. The right filler or sealant for the traffic and movement protects them flagging broken arrises before sealing.
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces priming where the maker calls for it.
General trades versus a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
What affects the price in Aith
The price varies from site to site. Expect it to depend on:
- The product specified
- Removal of failed or old sealant
- The site’s rules and procedures
- Quantities, in metres or numbers
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What to include in your enquiry
It doesn’t need to be a full survey. These details are enough to start:
- What the building is and how it’s used
- Specification clauses that apply
- Approximate linear metres or a joint schedule
- The asbestos register, for older buildings
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.