Aith commercial sealant contractors
Sealant work for offices, shops, hotels and other commercial buildings across Aith, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Shrunken sealant along kitchen worktops and splashbacks
- Messy, uneven beads from earlier work that let the building down
- Wall and floor joints that have lost their seal
Commercial sealant contractors across Aith
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our commercial sealant contractors in Aith
We have applied sealant on commercial sites for over 20 years: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. Let us know which site documents you need and they’ll be confirmed with the quote. Most enquiries involve weathered facade sealant that no longer flexes and damp patches where an external joint has failed, on kitchen worktops and splashbacks, washrooms and tea points and window and door perimeters. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Aith is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
On a typical commercial building in Aith, the joints that fail first are the hardest-worked ones: south-facing perimeters, entrance thresholds and busy washrooms.
For a job around Aith, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Internal joints can be done whatever the day brings.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Aith (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Questions about Aith
Does a coastal location like Aith affect which sealant is used?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Do you work on the island where Aith is?
Yes. Islands are part of our area, Aith included. We group island work where we can and plan around the crossings.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Is failed sealant stripped out, or sealed over?
Every failed bead is cut out completely. New sealant can’t grip the old bead, so laying over it never lasts.
How is commercial sealant work priced?
Send what you have, even a few photographs and rough lengths. Questions or a site visit follow where needed, and then a fixed quote for the agreed scope.
Do you work for facilities managers and managing agents?
Yes. A large share of our work comes through facilities managers, managing agents and landlords as well as contractors. Tell us how you issue work and we will fit in.
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Working on commercial sites near Aith
With the shore within about 1 mile, Aith counts as a coastal location. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Sea-facing elevations are usually where failed joints show first. The east of Scotland, where Aith is, gets less rain than the west. Cold snaps still affect when external joints can be sealed.
A lasting commercial joint around Aith begins with the old bead fully out and the faces clean and dry. Where a joint is on show in Aith, we’ll check which shades the product offers before work starts.
Aith is in the Shetland Islands. Businesses, contractors and managing agents in Aith use us for work on sealant joints, as part of our coverage of the Shetland Islands. Aith is one of 63 places we cover in the Shetland Islands.
We cover the ZE2 postcode districts for sealant joints. If your site is on Marthastoon and Wirligert or close by, we can quote for sealant joints. You will find Aith on or near the B9071, so getting applicators and materials to site is simple. Nearby places we also cover include Kalliness (4 miles south-east), Voe (6 miles north-east), Easter Skeld (7 miles south), Dury (7 miles east) and Vassa (8 miles east) for sealant joints. Bigger towns within reach include Lerwick (12 miles south-east), Sound (12 miles south-east), Scalloway (11 miles south) and Brae (8 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
What’s near Aith
Green spaces nearby include Loch of North-House and Russaness Hill.
What else we do in Aith
Keeping the joints sound
Regular inspection catches problems early. Specifically:
- Have extract fans checked so wet areas dry out
- Note dates and locations of sealant work for future planning
- Ask cleaners to use a soft cloth and mild cleaner on sealant
- Ask fit-out and M&E contractors to report any sealant they disturb
In washrooms and kitchens, extraction makes a real difference to sealant life. Fans that are broken or switched off leave joints damp for longer, which is how mould gets back in. Your maintenance team can look at extract fans at the same time.
Each spell of wet weather pushes more water through an open joint. Behind a panel or frame, that water can sit unseen for a long time. Catching it at the sealant stage avoids the bigger repair.
How the job changes by surface
Fire-rated seals where specified
Intumescent and other fire-rated sealants go in at service penetrations and linear gaps to the maker’s tested details, where they are specified. Fire-stopping design and sign-off sit with the designer, fire engineer or building control, and we install to the specification.
Shop fronts and retail fit-outs
Retail work usually has to fit around trading. Tell us your trading hours and access windows and we’ll plan around them.
How the quote is worked out
A fixed quote reflects the actual work. It allows for:
- Phasing around occupants
- How much there is to seal
- Distance, for remote addresses
- Site requirements such as inductions and permits
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Details that help us quote
However big the job, the same details help:
- Whether the building will be occupied during the work
- The product your specification calls for
- The postcode of the building
- Rough lengths or quantities, or drawings if you have them
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Diagnose, treat, sign off
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. For work around Aith, we aim for one trip, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Where parts of the building must stay open, the work is phased.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- A final walk-round, then the 12-month guarantee applies.
Preparing the site
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
- Send your site hours and access windows
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or send details through our quote form.
Related advice
Building owners, agents and FMs in Aith
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Aith can sit alongside others in a wider programme across the Shetland Islands.