Sound floor joint sealing
Floor joint sealing in Sound, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Cracked and crumbling joint fill
- A gap opening alongside old joint filler
- Dock area joints that have failed first
Floor joint sealing near Sound
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle floor joint sealing in Sound
Most industrial slabs are divided into panels with saw cuts and day joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. If you are dealing with grimy joint lines spoiling a showroom floor and old filler gone hard, cracked or loose, we can help, whatever the surface. Facilities teams, main contractors and managing agents in Sound tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
In smaller places such as Sound, the joints we are asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
Every job we finish is backed by a 12-month workmanship guarantee, in Sound as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Where
- Sound (ZE1)
- Wider area
- Shetland Islands
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Quoting for work in Sound
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Site requirements such as inductions and permits
- How accessible the joints are
- The product specified
- Removal of failed or old sealant
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Sending details for a quote
Diagnosis starts before we arrive. Let us know:
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
- Drawings or a marked-up plan, if available
- The type of building and who uses it
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Looking after the joints
A few simple habits keep the new joints working:
- Let us know what the floor is cleaned with
- Hold traffic back until the product has cured
- Photograph any joint that starts to chip
- Allow for topping up joints as a new slab settles
We will give you a time before trucks can run over the new joints and it pays to stick to it. Cones or barriers stop the first driver cutting the corner.
Treating joints while the arrises are sound keeps the work simple. Once they have broken away, edge repair comes first and that takes longer and closes areas for longer.
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a day for smaller units, with bigger warehouse floors programmed over several visits, and we clear our waste as we work. Where we can, we combine work around Sound with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Getting the site ready
- Arrange parking or a loading space
- Have the specification and drawings to hand
- Move anything stored against the joints
Quotes
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Read more
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Worn screed or surface finishes
- Structural cracking in the slab
- Level or flatness problems across the floor
Not sure which it is? You can phone 01277 525 020 or send photos by email and we will tell you honestly.
What we seal
- Construction joints
- Joints along racking aisles
- Loading bays
- Saw-cut induced joints
- Retail and showroom floors
- Forklift and pallet-truck routes
Nearby places to Sound
More services for Sound
Why it’s worth doing now in Sound
A floor coating laid over open joints soon cracks along the joint lines. The joints have to be filled or sealed as joints, whether or not the floor is coated. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor in Sound
- Old sealant cut out, never sealed over
- Constructionline member for supplier checks
- Commercial sealant work since 2005
- Work to your specification and the manufacturer’s guidance
See our cost guide or our accreditations.
Joints that move: notes for Sound
Sound is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Less than 3 miles from Sound there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Phasing is what makes joint work possible on busy sites such as South Gremista Industrial Estate (1.4 miles north of Sound): one bay, aisle or car park row at a time. For buildings at a park such as North Ness Business Park, 1.4 miles north-east of Sound, brick and panel movement joints are easy to forget until one leaks. Large sites such as Gilbert Bain Hospital (to the north-east of Sound) have car parks, service roads and long elevations with movement joints in brick and panels.
Sound is about 1 mile south-west of Lerwick, in the Shetland Islands. Any commercial site in Sound is covered, whether it’s a single job or part of a planned programme. Our the Shetland Islands coverage takes in 63 places.
If you need floor joint sealing in ZE1, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Quoys Road, South Road and Oversund Road. Just outside Sound, we also work in Lerwick (1 mile north-east), Gulberwick (2 miles south-west), Gremista (2 miles north), Grindiscol (2 miles east) and Heogan (2 miles north-east). Among the larger centres in the Shetland Islands is Sound, and its commercial and public buildings are all within our area. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you ring 01277 525 020 or use the quote form.
What’s near Sound
Around Sound, our work takes us to commercial buildings near Gilbertson Park and the streets around them. A little further out are Gilbert Bain Hospital (0.7 miles north-east) and Shetland Museum (1.2 miles north-east). The countryside around Sound includes Hill of Berry and Clickimin Loch.
Questions we’re asked in Sound
Can you work on a hospital site such as Gilbert Bain Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can being near the sea in Sound affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can you phase floor joint work around operations?
The work is phased. We work aisle by aisle or zone by zone so the rest of the floor stays in use around the site hours and access windows you give us.
Should floor joints be filled or sealed?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is normally right, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.