Fire Stopping in Whiteface
Need fire stopping in Whiteface? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed openings around new pipes and cables
- Seals that don’t match their tested detail
- Damaged fire seals in risers and voids
Fire stopping near Whiteface
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building near Whiteface, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Agree which areas must stay open
- Flag any permit to work we’ll need
- Clear stock, furniture or equipment away from the joints
Request a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
About our fire stopping in Whiteface
Facilities managers in Whiteface often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you have fire sealant pulled out of the opening and service penetrations left open after M&E works, we can help, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Whiteface, preparation and product choice get the time they need.
In smaller Scottish places like Whiteface, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Whiteface (IV25)
- Region
- Highland
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Questions we are asked in Whiteface
How do the Scottish rules apply to fire-rated sealing in Whiteface?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you produce the fire-stopping design for a job in Whiteface?
No. The designer or fire engineer sets the detail and building control accepts it. We install what’s specified, to the product’s tested detail.
What hours do you work?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
What do you charge?
There isn’t a price list, as every site differs. Send photographs or drawings and we’ll price it at a fixed figure.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Also near Whiteface
Also in Whiteface
Building owners, agents and FMs in Whiteface
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Looking after the joints
After handover, a little attention goes a long way:
- Leave fire sealant to cure fully before covering it
- Look above ceilings when tiles are lifted for other jobs
- Put resealing into every M&E and fit-out package
- File the specified details where the next contractor can find them
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there.
What we can’t put right
We check first that sealant really is the fix. It isn’t the answer for:
- Issuing fire ratings or certificates for seals
- Openings that need collars, wraps, batts or boards rather than sealant
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If in doubt, call the office on 01277 525 020 or email the details over and we will say what we think.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
Service penetrations in Whiteface buildings
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
For any site around Whiteface, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.
Whiteface is about 23 miles north-west of Nairn, in Highland. Anywhere in IV25, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Whiteface is one of 256 places in Highland on our list for service penetrations.
Postcode districts covered here: IV25 for service penetrations. You will find Whiteface on or near the A949. Just outside Whiteface, we also work in Spinningdale (2 miles west), Edderton (3 miles south), Camore (4 miles east), Dornoch (5 miles east) and Hilton (6 miles east). A short drive away, we cover Tain (6 miles south-east), Alness (13 miles south), Invergordon (13 miles south), Golspie (10 miles north-east), Brora (15 miles north-east) and Cromarty (14 miles south). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you speak to us on 01277 525 020 or send photos by email.
Local landmarks in Whiteface
A little further out are Proncy Castle (4.3 miles north-east). Not far away are Loch a' Ghiubhais and Struie Hill.
When to call us in Whiteface
Plenty of openings were simply never closed. They come to light during inspections, refits or when another trade lifts a tile.
Look out for the following:
- Seals that don’t match their tested detail
- Fire-stopping items raised at inspection or handover
- Openings found when ceilings come down for a refit
- Unsealed joints where partitions meet the slab
Around Whiteface, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
What to look for in a quote
- Which product they’ll use, and why it suits the joint
- Will RAMS and insurance details be available?
- How the joint faces will be prepared and primed
- How they’ll work around occupants