Fire stopping in Brora
Sealant work in Brora for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Non-fire-rated filler around services
- Damaged fire seals in risers and voids
- Service penetrations left open after M&E works
Fire stopping across Brora
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Your questions answered
Is hospital work, at somewhere like Lawson Memorial Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Is Brora too small for you to travel to?
No. Places such as Brora are covered as much as the big towns. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We will confirm the products and details used.
What does an EI 60 rating mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Results are classified under BS EN 13501-2 as E for integrity and I for insulation, with a time such as EI 60 or EI 120. That rating only holds when the product is installed to its tested detail.
How long does a typical visit take?
It depends on the scope, though a typical visit normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Is fire stopping in Scotland covered by different guidance?
Scotland sets its own building regulations, with Technical Handbooks, and England uses Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
About our fire stopping in Brora
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, phone 01277 525 020 or send details through our quote form with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on service gaps in risers, pipe penetrations and linear gaps at wall heads, and what we’re called in for most is openings found when ceilings come down for a refit and damaged fire seals in risers and voids. Looking for mastic applicators who cover Brora? We’ve been sealing commercial buildings since 2005.
Refurbishments in small hotels, schools and care homes around places like Brora can leave gaps around new services. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Brora (KW9)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs near Brora are often grouped with others in the same area. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Point out parking and an unloading spot
- Tell staff and tenants when we will be in
- Point out any areas we must not close
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or send photos by email.
Related advice
Why it’s worth doing now in Brora
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is normally a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Around smaller places like Brora, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why choose Mastic Doctor in Brora
- One phone line for London, the South East and Scotland
- Fully insured, including public liability cover
- Failed material removed, not covered up
- Fixed quotes based on photographs, drawings or a visit
What affects the price in Brora
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Specialist products, such as fire-rated or hygienic sealants
- Whether old sealant has to be cut out first
- The size and state of each joint
- The site’s rules and procedures
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- Access details, including height
- Where the site is, with the postcode
- A wide shot and a close-up of the area
- Whether the building will be occupied during the work
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email a schedule or drawings.
What we can’t put right
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Walls or floors that aren’t fire-resisting to begin with
- Large openings beyond what any sealant detail covers
- Deciding what a wall or floor needs, which belongs to the designer
Not sure which it is? You can phone 01277 525 020 or email a schedule or drawings and we’ll tell you honestly.
Joints and surfaces we work on
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Surface by surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening, with backing added if the detail requires it.
Also near Brora
Also in Brora
Fire stopping in Brora: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Theatres, wards and plant rooms at sites like Lawson Memorial Hospital (5.6 miles south-west of Brora) all have compartment walls crossed by services. For a hotel such as Royal Marine Hotel, which lies north-east of Brora, penetration seals are worth checking after any refit or services upgrade.
Brora is about 29 miles north of Forres, in Highland. Across the KW9 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 256 places in Highland, from busy centres to rural villages.
We cover the KW9 postcode districts. If your site is on Market Street, High Street and Gower Street or close by, send details and we will quote for service penetrations. Nearby places we also cover include Clynelish (1 mile north), Dalchalm (1 mile north), Golspie (5 miles south-west), Littleferry (8 miles south-west) and Embo (9 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or use the quote form.
Near you in Brora
Brora has its own railway station: Brora station. A little further out are Lawson Memorial Hospital (5.6 miles south-west) and Dunrobin Castle (3.9 miles south-west). Green spaces nearby include Loch an Tubairnaich.
Maintenance after handover
Problems stay small when the joints are checked regularly. Specifically:
- Include service cupboards in routine inspections
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Foam or ordinary sealant is never a fire-seal repair
- File the specified details where the next contractor can find them
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate.