
Golspie fire stopping
Fire stopping for Golspie, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Fire stopping installed outside its tested range
- Head-of-wall gaps with no fire seal
- Fire seals cut back for extra cables and never reinstated
Fire stopping in Golspie
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Golspie
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. We close the openings listed on your schedule, using the specified sealant and detail. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and pipe penetrations, and what we’re called in for most is unsealed openings around new pipes and cables and snag lists that include open service penetrations. Most enquiries from Golspie start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Around smaller places such as Golspie, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email drawings and photos and we will come back to it.
- Where
- Golspie (KW10)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026

Why deal with it now?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Golspie before they leak.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why choose Mastic Doctor in Golspie
- Specification-led, product-correct work
- Over 20 years of commercial sealing
- Our applicators hold CSCS cards
- A Constructionline member, so easy to vet
Also near Golspie
What else we do in Golspie
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
FAQs: Golspie
Do you cover business parks and estates near Golspie, such as Golpsie Business Park?
Yes, sites like Golpsie Business Park are within our area, along with the rest of Golspie. A few photos and the unit address let us price the work.
Is hospital work, at somewhere like Lawson Memorial Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will you come and look before quoting?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs typically get a visit.
Which standards are fire seals tested to?
BS EN 1366-3 covers penetration seals and BS EN 1366-4 covers linear joints. Classification follows BS EN 13501-2, where E is integrity, I is insulation and the number is minutes, as in EI 60. That rating only holds when the product is installed to its tested detail.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Do you have third-party installer accreditation for fire stopping?
No, and we’d rather be clear about that. Some clients require third-party installer schemes even though the law doesn’t, so check your contract first. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Can you work to our specification?
Yes. Send it with your enquiry, and we will price the work to it.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Ask the designer to confirm details early on refits
- Keep product data and details in the fire safety file
- Check with the data sheet before painting over fire sealant
- Include service cupboards in routine inspections
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Signs you need fire stopping in Golspie
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
Typical triggers for a call:
- Non-fire-rated filler around services
- Old intumescent sealant that has split away
- Service penetrations left open after M&E works
- Seals that don’t match their tested detail
Large healthcare estates like Lawson Memorial Hospital (to the west of Golspie) change their services often, so penetration seals are worth checking after M&E work.
What to look for in a quote
- Proof of insurance
- The terms of the workmanship guarantee
- How the existing material will be dealt with
- How they’ll work around occupants
Honest limits
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Plastic pipes whose detail calls for a collar or wrap
- Gaps in walls that were never built as compartment walls
- Writing the fire-stopping specification
If you’re not sure, just speak to us on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Joints and surfaces we work on
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
Where services cross fire walls in Golspie
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
Tenant changes at parks like Golpsie Business Park (to the south-west of Golspie) bring new data and services, and openings through fire-resisting walls need the specified seal. For a hotel such as Stags Head Hotel (under half a mile south of Golspie), penetration seals are worth checking after any refit or services upgrade.
Golspie is about 27 miles north of Nairn, in Highland. We send applicators to Golspie for service penetrations. Golspie is one of 256 places we cover in Highland.
Anyone looking for fire stopping in KW10 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Main Street, Station Road and East Millicent Avenue or close by, we can quote for service penetrations. Nearby places we also cover include Littleferry (3 miles south-west), Skelbo Muir (4 miles south-west), Embo (5 miles south), Brora (5 miles north-east) and Hilton (5 miles south). Nearby towns on our patch include Tain (12 miles south), Dornoch (7 miles south) and Balintore (15 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Landmarks near Golspie
There’s a railway station in Golspie itself: Golspie station. Well-known places in the area include Dunrobin Castle (1.3 miles north-east) and Dunrobin Castle Museum (1.4 miles north-east). Not far away are Loch Fleet National Nature Reserve and Ben Bhraggie.
On site: what to expect
Tell us your site hours and access windows and we will plan around them. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Where we can, we combine work around Golspie with other jobs nearby. Let us know if your dates have any give.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Tell us your opening times and when work is allowed
- Warn occupants and staff about the work
- Point out parking and an unloading spot
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.