Fire-rated sealing and fire stopping in Totland, Isle of Wight
Commercial sealant work in Totland for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Service penetrations left open after M&E works
- Expanding foam used as fire stopping
- Fire-rated sealant that has cracked or shrunk back
Fire stopping near Totland
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Totland
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. Site teams most often ask us about fire sealant pulled out of the opening and builders’ foam or ordinary silicone in compartment walls, across linear gaps at wall heads, pipe penetrations and service gaps in risers. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Totland, preparation and product choice get the time they need.
Buildings in a smaller place such as Totland that need fire-rated sealing are typically schools, care homes, surgeries, small offices and flats over shops. Specified fire-rated sealant goes around new services there, built to match the manufacturer’s detail.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, phone 01277 525 020 or email a schedule or drawings and we will come back to it.
- Location
- Totland (PO39, PO40)
- Wider area
- Isle of Wight
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Several jobs near Totland can be grouped on one trip. Mention the building’s opening times and we’ll work within them.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Tell staff and tenants when we’ll be in
- Tell us your opening times and when work is allowed
Ask for a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, ring 01277 525 020 or email us.
Advice
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Distance, for remote addresses
- Removal of failed or old sealant
- How accessible the joints are
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Any specification or named product
- Asbestos survey details if the building is older
- What the building is and how it’s used
- Access details, including height
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Also near Totland
What else we do in Totland
Fire-rated sealing for Totland buildings
A number of hotels sit less than 2 miles from Totland. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
In a hotel such as Albion Hotel, which lies south-east of Totland, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Schools such as St Saviour's Catholic Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Totland is about 5 miles south of Lymington, in the Isle of Wight. We send applicators to Totland for service penetrations. Totland is one of 125 places we cover in the Isle of Wight for service penetrations. Our Southampton page has more on work in that area, about 18 miles away.
We cover the PO39 and PO40 postcode districts for service penetrations. If your site is on Meadow Barn Close, Ward Road and Weston Road or close by, send details and we’ll quote for service penetrations. Access to Totland is via the B3322, so getting applicators and materials to site is simple. We also cover Colwell (1 mile north-east), Freshwater (1 mile east), Easton (1 mile east), Norton Green (1 mile north-east) and Afton (1 mile east) for service penetrations. A short drive away, we cover Newport (11 miles east), Cowes (12 miles north-east), East Cowes (12 miles north-east), Barton (11 miles east), Hunny Hill (11 miles east) and Cross Lane (11 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Around Totland
Recent enquiries here include premises near Colwell Bay Inn and the streets around them. Well-known places in the area include Yarmouth Castle (2.5 miles north-east) and Dimbola Museum And Galleries (1.2 miles south-east). Green spaces nearby include Lymington and Keyhaven Marshes Nature Reserve and Tennyson Down.
Leave it or put it right?
Open penetrations multiply: each new service adds to the list. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. Sealant hardens, cracks and loses grip with age, UV and movement. Renewing it in good time keeps the building weathertight.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why appoint us
- 12-month guarantee on workmanship
- Fully insured, including public liability cover
- Old sealant cut out, never sealed over
- CHAS accredited
See what affects the cost and our accreditations.
FAQs: Totland
Can you seal penetrations in a hotel in Totland after a refit?
Yes, where fire-rated sealant is the specified product. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Is Totland too small for you to travel to?
No. Places such as Totland are covered as much as the big towns. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
What do you charge?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
Do you offer coloured sealant?
That depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
What sealant work can’t fix
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Openings that need collars, wraps, batts or boards rather than sealant
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Signing off or certifying a building’s fire stopping
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think.
What we seal
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
Signs you need fire stopping in Totland
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint, and the wrong product can split as a result. Linear joint details set a width range and movement capability, and the seal has to sit within them.
What tends to prompt an enquiry:
- Seals disturbed by maintenance and left open
- Head-of-wall gaps with no fire seal
- Seals that don’t match their tested detail
- Expanding foam used as fire stopping
In a building such as Christ Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
What to look for in a quote
- What level of public liability insurance do they hold?
- What the guarantee covers, and for how long
- Their plan for phasing and protecting the area
- Are they CHAS accredited or on Constructionline?
Building owners, agents and FMs in Totland
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.