The Mastic Doctor team standing beside their branded vans outside an office building
Isle of Wight · England

Fire-rated sealing and fire stopping in Easton, Isle of Wight

Fire-rated and intumescent sealing of service penetrations and linear gaps in Easton and across the Isle of Wight. CHAS accredited and fully insured, with a 12-month guarantee.

  • Unsealed joints where partitions meet the slab
  • Expanding foam used as fire stopping
  • Fire-stopping items raised at inspection or handover
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
Constructionline member
£5m PL insurance

Fire stopping across Easton

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

About our fire stopping in Easton

Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal. If you have improvised or mixed-product fire seals and seals disturbed by maintenance and left open, we can help. For commercial sealant work in Easton, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.

A job near Easton is usually planned around one visit, with the specification and photographs sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.

Work we carry out in the Isle of Wight comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or use the quote form and we’ll come back to it.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Easton (PO40)
Region
Isle of Wight
Guarantee
12 months on every job
Price
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026

When it isn’t the sealant

Some faults sit outside our scope, and we say so rather than covering them up:

  • Large openings beyond what any sealant detail covers
  • Deciding what a wall or floor needs, which belongs to the designer
  • Signing off or certifying a building’s fire stopping

Not sure which it is? You can ring 01277 525 020 or email us and we will tell you honestly.

Where we work in Easton

  • Small duct penetrations where the tested detail allows
  • Service gaps in risers
  • Linear gaps at wall heads
  • Pipe penetrations
  • Cable penetrations
  • Joints between fire-resisting walls and floors

Service penetrations in Easton buildings

Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Easton has a number of hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.

In a hotel such as Albion Hotel, less than half a mile to the south-east of Easton, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Older community buildings such as St. Agnes' Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.

Easton is about 6 miles south of Lymington, in the Isle of Wight. Anywhere in PO40, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Easton is one of 125 places in the Isle of Wight on our list. There’s a separate page for Southampton, about 18 miles away.

Commercial sites across PO40 are covered for service penetrations. Streets here include Bay Road, Camp Road and Gate Lane. Sites close to Easton are covered too, including Afton (1 mile east), Afton Park (1 mile east), Freshwater (1 mile north-west), Totland (1 mile west) and Colwell (1 mile north-west). A short drive away, we cover Newport (10 miles east), Cowes (11 miles north-east), Shanklin (15 miles east), Ventnor (14 miles east), East Cowes (12 miles north-east) and Barton (10 miles east). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.

Around Easton

Around Easton, our work takes us to commercial buildings near The Red Lion pub, among other places. Well-known places in the area include Yarmouth Castle (2.3 miles north) and Dimbola Museum And Galleries (under half a mile south). Not far away are Afton Down and Lymington and Keyhaven Marshes Nature Reserve.

Map of Easton © OpenStreetMap contributors

Signs you need fire stopping in Easton

When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.

What tends to prompt an enquiry:

  • Fire sealant pulled out of the opening
  • Unsealed joints where partitions meet the slab
  • Fire stopping installed outside its tested range
  • Fire seals cut back for extra cables and never reinstated

Holiday works at schools like All Saints Church of England Primary School often leave service openings to seal before pupils return.

Before you book anyone

  • Do they follow the manufacturer’s priming guidance?
  • Are they CHAS accredited or on Constructionline?
  • Which product they’ll use, and why it suits the joint
  • How long is the guarantee, and what does it include?

Our contractor checklist

Why act early in Easton

A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. Converted and older buildings near places like Easton tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.

Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.

Why us?

  • One phone line for London, the South East and Scotland
  • Old sealant cut out, never sealed over
  • Work to your specification and the manufacturer’s guidance
  • Health and safety: CHAS accredited

Read how commercial sealant jobs are priced or how we’re accredited.

Work for main contractors and building owners

We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Easton can sit alongside others in a wider programme across the Isle of Wight.

Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.

Questions we’re asked in Easton

Is Easton off your patch?

No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.

Do you seal service penetrations in hotels around Easton?

Yes. We install fire-rated and intumescent sealant where it is specified. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.

Are you fully insured?

Yes. Mastic Doctor is fully insured, public liability included.

Is it fine to apply new sealant on top of old?

No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.

Can weather delay the job?

It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

When can you be on site?

Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.

What will the job cost?

There isn’t a price list, because every site is different. With photographs or drawings, we can give you a fixed quote.

Our process

Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building around Easton, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.

  1. First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
  2. Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
  3. Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
  4. We fit the backing the detail asks for, to the stated depth.
  5. Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
  6. Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.

Before we start on site

  • Let us know about inductions and permits
  • Tell us which areas need to stay in use
  • Arrange parking or a loading space

Getting a fixed quote

Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, ring 01277 525 020 or email drawings and photos.

Get a quick quote

Related advice

Site staff or a sealant specialist?

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

Accreditations

Trusted. Accredited. Insured.