Isle of Wight · England
Commercial sealant contractors in PO40
Sealant work for contractors, FMs and building owners across PO40, from Freshwater, Easton and Colwell, with a fixed quote before we start.
Sealant contractors for PO40
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Places in PO40
Our services across PO40
- Facade and window perimeter sealing
- Mastic sealing for building owners and managing agents
- Fire-rated sealing and fire stopping
- Industrial and floor joint sealing
- Commercial washroom and wet-area sealing
- Construction and new-build mastic
- Commercial sealant contractors
- Expansion and movement joint sealing
- Coloured and colour-matched sealant
- See all services
Let us know the job and your postcode and we’ll come back with a price: ring 01277 525 020 or send details through our quote form.
Districts next door
Elsewhere in the Isle of Wight
All places in the Isle of Wight
Areas we cover
How commercial sealant contractors works in PO40
Commercial occupiers rarely want a floor out of action for sealant work. Tell us your site hours and access windows and we will plan around them. That applies whether the building is an office, a shop, a hotel, a college or a care home. We work on kitchen worktops and splashbacks, external facade joints and window and door perimeters, and the usual reasons a site gets in touch are shrunken sealant along kitchen worktops and splashbacks and expansion joints with the sealant torn out.
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself normally taking as long as the agreed scope needs, from a single visit to a programme spread over several weeks.
- You send photographs, drawings or a list of the joints and areas involved, and a site visit is booked where it helps.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
How we quote
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote once you have the details.
Why appoint us
- Old sealant cut out, never sealed over
- Over 20 years of commercial sealing
- Work carried out by CSCS-carded applicators
- Colours chosen to suit frames, cladding or finishes where possible
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or send details through our quote form.
Local landmarks in Freshwater
We work on buildings around The Red Lion pub, All Saints' Church and All Saints Church of England Primary School. A little further out are Yarmouth Castle (1.9 miles north-east) and Ferguson Family Museum (0.7 miles north-east). Not far away are Lymington and Keyhaven Marshes Nature Reserve and Afton Down.
Commercial premises across PO40
Across PO40, from Freshwater, Totland and Easton to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. Because we cover all of it, multi-site occupiers can bring every building under one quote, with colours matched site to site where the brand needs it.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, and every job in PO40 starts with access, parking and site rules. Parts of PO40 lie on or near the coast, where wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and joint preparation matter more there.
Freshwater: In hotels such as Albion Hotel, which lies south-east of Freshwater, refurbishments typically mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. Whatever the building in Freshwater, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
What happens if it’s left?
Leaving a failed joint rarely saves money. Once water gets behind the seal, finishes and ceilings underneath are next. Resealing while only the sealant has failed keeps the job small.
What your quote should include
- Their public liability cover
- How long is the guarantee, and what does it include?
- How the joint faces will be prepared and primed
- The named product and why it was chosen
What affects the price in PO40
Each job is priced on its own details. The things that drive the figure:
- The site’s rules and procedures
- Access and working height
- Which sealant the job calls for
- Removal of failed or old sealant
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
Whether it’s one area or a whole building, these details speed things up:
- Whether an asbestos survey exists
- Any specification or named product
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, give us a call on 01277 525 020 or email drawings and photos.
How the job changes by surface
Window and door perimeters
The perimeter joint between a frame and the structure keeps rain out of the reveal. We remove the old seal, prepare the faces, fit backing where needed and seal again with a product chosen for both the frame and the wall.
Fire-rated seals where specified
Intumescent and other fire-rated sealants go in at service penetrations and linear gaps to the maker’s tested details, where they are specified. The design and sign-off of fire stopping belong to the designer and building control; we install what’s specified.
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- A dripping trap, valve or pipe behind a fitting
- Structural cracks or movement the joints weren’t designed for
- Broken glass or blown double-glazed units
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
PO40: questions and answers
Do you check for asbestos before removing sealant?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and anything suspect is left until it has been tested.
Is your work guaranteed?
A 12-month guarantee covers the workmanship from handover. Keeping joints clean and inspected helps them last well beyond that.
Is PO40 in your area?
Yes. PO40 falls within our area, and the simplest way to start is to give us a call on 01277 525 020 or send photos by email.
Do you work directly for building managers?
Yes. We quote, schedule and report back in the way that suits your process.
How do you keep disruption to occupiers down?
It’s mostly about sequence: areas are phased, access windows agreed and enough washrooms or entrances left in use. Let us know what can’t close and we’ll work around it.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.