Fire stopping in Afton Park
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Afton Park and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Seals that don’t match their tested detail
- Old intumescent sealant that has split away
- Non-fire-rated filler around services
Fire stopping near Afton Park
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Keeping the joints sound
To get the most from the new sealant:
- Keep general-purpose fillers away from compartment walls
- Treat an open penetration as a priority repair
- Look above ceilings when tiles are lifted for other jobs
- Check with the data sheet before painting over fire sealant
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small compared with dozens found at once.
How we handle fire stopping in Afton Park
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on pipe penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors, and what we are called in for most is seals that don’t match their tested detail and service penetrations left open after M&E works. Whoever orders the work in Afton Park, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Rural conversions around Afton Park can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Afton Park (PO40)
- Region
- Isle of Wight
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Questions about Afton Park
Do you seal service penetrations in hotels around Afton Park?
Yes, where the specification calls for fire-rated sealant. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
What happens to BS 476 references for fire stopping in Afton Park?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Can the building stay open while you work?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Also near Afton Park
Also in Afton Park
Fire-rated sealing for Afton Park buildings
Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail. There are a number of hotels within about 2 miles of Afton Park. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product.
Hotels such as Albion Hotel, under half a mile south-west of Afton Park, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Halls and meeting rooms at places like St. Agnes' Church sometimes gain new services, and any compartment wall crossed needs the specified seal. Holiday works at schools like All Saints Church of England Primary School often leave service openings to seal before pupils return.
Afton Park is about 6 miles south of Lymington, in the Isle of Wight. Any commercial site in Afton Park is covered, whether it’s a single job or part of a planned programme. We work across 125 places in the Isle of Wight, from busy centres to rural villages. Our Southampton page has more on work in that area, about 18 miles away.
Anyone looking for fire stopping in PO40 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Manor Road, Newport Road and Southdown Road. We also cover Afton (1 mile west), Easton (1 mile west), Freshwater (1 mile north-west), Norton Green (1 mile north-west) and Colwell (2 miles north-west). Bigger towns within reach include Newport (9 miles east), Ryde (15 miles east), Cowes (10 miles north-east), Sandown (15 miles east), Shanklin (15 miles east) and Ventnor (14 miles south-east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you give us a call on 01277 525 020 or send details through our quote form.
Landmarks near Afton Park
In Afton Park, that means premises near The Red Lion pub. Other landmarks nearby include Dimbola Museum And Galleries (0.5 miles west) and Yarmouth Castle (2.2 miles north). For a walk, there’s Afton Down and Lymington and Keyhaven Marshes Nature Reserve.
Building owners, agents and FMs in Afton Park
We work for building owners and managing agents on everything from one building to a spread of sites around Afton Park. Several sites can go on one quote, which keeps the paperwork simple.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
What affects the price in Afton Park
Your fixed quote is built from the real scope. It takes account of:
- Working within restricted access windows
- Site requirements such as inductions and permits
- Any access equipment needed
- Distance, for remote addresses
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- The product your specification calls for
- How the joints are reached, and at what height
- A wide shot and a close-up of the area
- Where the site is, with the postcode
To get a fixed quote, phone 01277 525 020 or email the details over, telling us the site location and the nature of the job. Our quote form is another easy route.
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Approving the work on behalf of building control
- Walls or floors that aren’t fire-resisting to begin with
- Deciding what a wall or floor needs, which belongs to the designer
Not sure which it is? You can phone 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
Diagnose, treat, sign off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. Rural sites near Afton Park may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Send your site hours and access windows
- Point out any areas we must not close
- Arrange parking or a loading space
Getting a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Different surfaces, different methods
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness first.
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening, with backing added if the detail requires it.