Sandbank fire stopping
Planning work on a service penetration in Sandbank? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Sandbank
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Diagnose, treat, sign off
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Tell us who will meet us and how to get in at your building near Sandbank. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Tell us your opening times and when work is allowed
- Explain the parking and delivery arrangements
- Tell staff and tenants when we’ll be in
Get a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Related advice
How we handle fire stopping in Sandbank
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4, with results classified under BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. If you have fire seals cut back for extra cables and never reinstated and openings found when ceilings come down for a refit, we can put it right. A single leaking joint is often how a building in Sandbank first comes to us: we look at the rest while we’re there and tell you what we find.
For a building near Sandbank, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Sandbank (PA23)
- Region
- Argyll and Bute
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What affects the price in Sandbank
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- How accessible the joints are
- The site’s rules and procedures
- The total length or number of joints
- Backing rod, priming and other preparation
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
However big the job, these details speed things up:
- Any specification or named product
- Asbestos survey details if the building is older
- A wide shot and a close-up of the area
- The type of building and who uses it
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or use the quote form to discuss it first.
Compartments and services around Sandbank
Sandbank has several hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Schools such as Dunoon Grammar School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards. In a hotel such as Ardtully Hotel, 1.1 miles to the east of Sandbank, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Hospital estates such as Cowal Community Hospital, 1.4 miles south of Sandbank, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Sandbank is about 7 miles west of Greenock, in Argyll and Bute. We cover Sandbank, with the same fixed quotes and 12-month guarantee as everywhere else. Sandbank is one of 124 places we cover in Argyll and Bute for service penetrations. Our Glasgow page has more on work in that area, about 27 miles away.
Work on service penetrations is covered throughout PA23, whatever the building. If your site is on Cromlech Road, Shore Road and Pier Road or close by, send details and we will quote for service penetrations. If your building is just outside Sandbank, we cover Kilmun (1 mile north), Strone (1 mile east), Tom nan Ragh (2 miles north-west), Kirn (2 miles south-east) and Hunters Quay (2 miles south-east). Nearby towns on our patch include Helensburgh (8 miles east), Rothesay (11 miles south-west), Cardross (11 miles east), Rhu (7 miles north-east), Garelochhead (8 miles north-east) and Port Bannatyne (10 miles south-west). For island and remote sites, travel and materials need planning ahead.
What’s near Sandbank
The closest station to Sandbank is Gourock station, roughly 4.9 miles east. Other landmarks nearby include Dunoon Castle (2.4 miles south) and Castle House Museum (2.3 miles south). For a walk, there’s Loch Loskin.
Questions about Sandbank
Is a smaller place like Sandbank outside your area?
Not at all. Sandbank is within our area. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Is a hospital such as Cowal Community Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
What does an EI 60 rating mean?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. EI 60 means integrity and insulation for 60 minutes in the tested arrangement and the installation has to match the test.
Do you need to see the site first?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Different surfaces, different methods
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables and we work within those limits.
Small ducts
Ducts are only sealed with sealant where the detail allows it. The ductwork, its supports and any dampers are for the ductwork contractor.
Why act early in Sandbank
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Why clients in Sandbank choose us
- A Constructionline member, so easy to vet
- A fixed quote before work starts
- Our applicators hold CSCS cards
- Specification-led, product-correct work
Take a look at our cost guide and how we’re accredited.
Nearby places to Sandbank
Also in Sandbank
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Owners, agents and contractors
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Sandbank. Several sites can go on one quote, so there’s one set of paperwork to deal with.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.