Fire Stopping in Helensburgh
Fire-rated and intumescent sealing of service penetrations and linear gaps in Helensburgh. CHAS accredited and fully insured, with a 12-month guarantee.
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
- Expanding foam used as fire stopping
Fire stopping for Helensburgh sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Helensburgh
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on linear gaps at wall heads, service gaps in risers and cable penetrations, and what we are called in for most is seals disturbed by maintenance and left open and fire stopping installed outside its tested range. Searching for sealant specialists in Helensburgh? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
When contractors add cables and pipes in a Scottish town building, gaps through fire-resisting walls are often left behind. If fire-rated sealant is the named product, it is installed as tested; if the detail needs a different item, we’ll point that out.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Helensburgh (G84)
- Region
- Argyll and Bute
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Industrial estates and retail parks around towns like Helensburgh normally have yard space and site rules. Central premises can need a little more planning for parking.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Point out parking and an unloading spot
- Have the specification and drawings to hand
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
For a fixed quote, phone 01277 525 020 or email us. You can also send details through our quote form.
Advice
More services for Helensburgh
Compartment walls and floors in Helensburgh
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. A 2-mile radius around Helensburgh takes in several hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Hotels like Commodore Hotel (0.8 miles west of Helensburgh) are refurbished in phases, and each phase can open up compartment walls. Wherever services are added at a hospital such as Victoria Infirmary, 0.5 miles to the south-east of Helensburgh, the compartment line has to be made good with the specified product.
Helensburgh is about 5 miles north-east of Greenock, in Argyll and Bute. Helensburgh sits inside our coverage and the rest of Argyll and Bute, with the same fixed quotes and 12-month guarantee as everywhere else. 124 places across Argyll and Bute fall within our area, including Helensburgh. Glasgow is covered too, around 20 miles from Helensburgh.
Commercial sites across G84 are covered. We cover commercial and managed buildings on Colquhoun Square, Station Road and Charlotte Street. Access to Helensburgh is via the A814 and A818, so getting applicators and materials to site is simple. If your building is just outside Helensburgh, we cover Colgrain (2 miles south-east), Rhu (2 miles west), Rosneath (3 miles west), Shandon (3 miles north-west) and Clynder (4 miles west). A short drive away, we cover Dunoon (9 miles south-west), Garelochhead (7 miles north-west), Sandbank (8 miles west) and Innellan (12 miles south-west). As one of the bigger centres in Argyll and Bute, Helensburgh has a broad mix of commercial, public and industrial buildings, and we cover them all.
Around Helensburgh
Locally, jobs take us to sites close to The Henry Bell pub. Helensburgh has its own railway station: Helensburgh Central station. A little further out are Ardencaple Castle (1.3 miles west) and Victoria Infirmary (0.5 miles south-east). Open spaces near Helensburgh include Lyle Hill.
When something else is needed
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Gaps in walls that were never built as compartment walls
- Writing the fire-stopping specification
- Large openings beyond what any sealant detail covers
Not sure which it is? You can ring 01277 525 020 or email us and we’ll tell you honestly before you book.
What we seal
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Different surfaces, different methods
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance, including keys, permits and any isolations.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest against the detail’s limits.
Questions we’re asked in Helensburgh
Could you schedule work at a campus like Argyll College UHI - Helensburgh for the vacation?
Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Can you seal around new services in a hotel near Helensburgh?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can staff carry on working while you are here?
Usually, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Location, for remote and island sites
- Specialist products, such as fire-rated or hygienic sealants
- Backing rod, priming and other preparation
- How accessible the joints are
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Sending details for a quote
To price the job accurately, we need a clear picture of the site. Send us:
- The asbestos register, for older buildings
- The postcode of the building
- Drawings or a marked-up plan, if available
- Access details, including height
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email the details over if you’d rather talk the job through.
Signs you need fire stopping in Helensburgh
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
These are often picked up first by site or facilities staff:
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
- Openings found when ceilings come down for a refit
- Seals that don’t match their tested detail
For a school such as Lomond School, penetration sealing fits best at the end of the summer works.
What to look for in a quote
- Will RAMS and insurance details be available?
- What the guarantee covers, and for how long
- How the joint faces will be prepared and primed
- Can the work be phased to keep areas open?
When to bring in a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.