Fire stopping in Dunoon
Fire-rated and intumescent sealing of service penetrations and linear gaps in Dunoon and across Argyll and Bute. CHAS accredited and fully insured, with a 12-month guarantee.
- Open linear gaps along the top of fire-resisting walls
- Builders’ foam or ordinary silicone in compartment walls
- Seals disturbed by maintenance and left open
Fire stopping in Dunoon
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Dunoon
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance on sites in Dunoon. Site teams most often ask us about openings found when ceilings come down for a refit and fire seals cut back for extra cables and never reinstated, across service gaps in risers, cable penetrations and linear gaps at wall heads. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Dunoon, preparation and product choice get the time they need.
Refurbishments in small hotels, schools and care homes around places like Dunoon can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Dunoon (PA23)
- Wider area
- Argyll and Bute
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Compartments and services around Dunoon
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install fire-rated sealant to that tested detail where it is specified. A 2-mile radius around Dunoon takes in plenty of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
In a building such as St John’s Church (Dunoon), any service penetration through a fire-resisting wall should be sealed to the specified detail. For a school such as Dunoon Primary School And Janitor's House, penetration sealing fits best at the end of the summer works. Wherever services are added at a hospital such as Cowal Community Hospital, less than half a mile to the north of Dunoon, the compartment line has to be made good with the specified product.
Dunoon (Gaelic: Dùn Obhainn) is about 6 miles west of Greenock, in Argyll and Bute. We cover commercial sites throughout Dunoon, whether it’s a single job or part of a planned programme. Across Argyll and Bute, 124 places are covered, including Dunoon. There’s a separate page for Glasgow, roughly 26 miles from Dunoon.
Postcode districts covered here: PA23 for service penetrations. For a building on Queen Street, Queens Court and Pilot Street or nearby, we can quote for service penetrations. Dunoon sits on or close to the A815 and A885, which helps when planning parking and deliveries for the job. We also cover Kirn (1 mile north-east), Hunters Quay (1 mile north-east), Bullwood (2 miles south), Sandbank (2 miles north) and Strone (2 miles north). Bigger towns within reach include Helensburgh (9 miles north-east), Rothesay (10 miles south-west), Cardross (11 miles east), Rhu (7 miles north-east), Garelochhead (10 miles north-east) and Port Bannatyne (9 miles south-west). Among the larger centres in Argyll and Bute is Dunoon, and we take on service penetrations for its commercial and public buildings. For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Around Dunoon
We work on buildings around Dunoon Grammar School, among other places. The closest station to Dunoon is Inverkip station, roughly 3.9 miles south-east of the centre. Well-known places in the area include Dunoon Castle (0.6 miles south) and Castle House Museum (0.6 miles south). For a walk, there’s Loch Loskin.
Surface by surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, along the full length of the run.
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. We follow whatever the detail requires and flag anything we can’t match.
How a job runs
We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. For work around Dunoon, we aim for one trip, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- For older buildings, check the asbestos register before work
- Flag any permit to work we’ll need
- Have the specification and drawings to hand
Request a quote
For a fixed quote, ring 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Advice
What else we do in Dunoon
Questions about Dunoon
Can you work on a hospital site such as Cowal Community Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Dunoon too far out for you?
Not at all. Dunoon is within our area. Every Scottish council area is within our area. Good photographs up front let us bring everything on the first visit.
Can you tell us what fire stopping our building needs?
No, that isn’t our role. Once you have a specification, we can price and install the sealant elements of it.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Which standards are fire seals tested to?
BS EN 1366-3 covers penetration seals and BS EN 1366-4 covers linear joints. Results are classified under BS EN 13501-2. The rating applies to the product as tested.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit.
Do you approve fire stopping for building control?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. We work to the specification and the manufacturer’s installation guidance.
Owners, agents and contractors
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Why it’s worth doing now in Dunoon
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Renewing every failing joint on one visit is the sensible approach for a place like Dunoon. Send photos and we will quote for everything together.
We don’t publish prices, since every building and every scope is different. Call for a quote.
What you get with us
- A fixed quote before work starts
- Old sealant cut out, never sealed over
- Workmanship guaranteed for 12 months
- CSCS-carded applicators
Take a look at what affects the cost or our accreditations and insurance.
Cost factors for service penetrations
Your fixed quote is built from the real scope. It takes account of:
- How much existing material needs removing
- Which sealant the job calls for
- Whether the work must be split into stages
- Backing rod, priming and other preparation
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
What we need to price the job
For an accurate fixed quote, we need to understand the site. Useful things to include:
- The site address and postcode
- Access details, including height
- Specification clauses that apply
- The asbestos register, for older buildings
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or email a schedule or drawings.