The Mastic Doctor team standing beside their branded vans outside an office building
Aberdeenshire · Scotland

Fire Stopping in Kennethmont

Work needed on a service penetration in Kennethmont? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Openings left by services added after handover
  • Damaged fire seals in risers and voids
  • Fire sealant pulled out of the opening
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m public liability

Fire stopping for businesses in Kennethmont

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

What the job involves on each surface

Plastic pipes

Plastic pipes soften and collapse in a fire. Small sizes are sometimes covered by an intumescent sealant detail, but many need a collar or wrap. We check the pipe material and diameter against the detail before we start.

Masonry and concrete

Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, with backing added if the detail requires it.

About our fire stopping in Kennethmont

Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you have old intumescent sealant that has split away and openings left by services added after handover, we can help. A specialist sealant contractor works differently from a general builder: on jobs in Kennethmont, preparation and product choice get the time they need.

Refurbishments in small hotels, schools and care homes around places like Kennethmont can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.

Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Kennethmont (AB54)
Region
Aberdeenshire
Guarantee
12 months on every job
Price
A fixed quote before we start
Call
01277 525 020
Updated
3 November 2026

What happens if it’s left?

It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.

The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.

Why choose Mastic Doctor in Kennethmont

  • CHAS accredited contractor
  • Over 20 years of commercial sealing
  • A fixed quote before work starts
  • Fully insured, including public liability cover

See what affects the cost and how we’re accredited.

Compartments and services around Kennethmont

In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.

Wherever services are added at a hospital such as Insch War Memorial Hospital (4.9 miles east of Kennethmont) the compartment line has to be made good with the specified product. In a building such as Kennethmont Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.

Kennethmont is about 14 miles west of Inverurie, in Aberdeenshire. We cover commercial sites throughout Kennethmont, whether it’s a single job or part of a planned programme. Kennethmont is one of 179 places in Aberdeenshire on our list. Aberdeen is covered too, around 27 miles from Kennethmont.

Work on service penetrations is covered throughout AB54, whatever the building. Main routes into Kennethmont include the B9002, which helps when planning parking and deliveries for the job. Sites close to Kennethmont are covered too, including Gartly (3 miles north-west), Backburn (3 miles north), Cottown (3 miles south-west), Rhynie (4 miles west) and Bridgend (5 miles north-west). Bigger towns within reach include Inverurie (14 miles east), Huntly (7 miles north), Garioch (14 miles east), Kemnay (14 miles south-east), Alford (8 miles south) and Port Elphinstone (15 miles east). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.

Landmarks near Kennethmont

Kennethmont’s nearest station is Insch station, about 4.8 miles east. Well-known places in the area include Druminnor Castle (3 miles south-west) and Insch War Memorial Hospital (4.9 miles east). For a walk, there’s Hill of Foudland.

Map of Kennethmont © OpenStreetMap contributors

Site staff or a sealant specialist?

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.

Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

Questions about Kennethmont

How do Scotland’s building standards affect fire-rated sealant in Kennethmont?

Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.

Is Kennethmont off your patch?

No. Places such as Kennethmont are covered as much as the big towns. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.

How long does a job like this take?

That varies with the scale of the job, but the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.

When can you be on site?

The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.

Can you follow the specification on our project?

Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.

Can you handle several sites?

Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.

How long do sealant joints last?

There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.

Work for main contractors and building owners

Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.

Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Kennethmont can sit alongside others in a wider programme.

How a job runs

Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. For a building near Kennethmont, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.

  1. First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
  2. On site, each opening is checked against the tested detail it is meant to follow.
  3. Unsuitable fillers and loose debris are taken out of each opening.
  4. Mineral wool or other backing goes in wherever the detail asks.
  5. Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
  6. If an opening needs something other than sealant, we tell you instead of improvising.

Getting the site ready

  • Send your site hours and access windows
  • Point out any areas we must not close
  • Tell staff and tenants when we’ll be in

Ask for a quote

To get a fixed quote, ring 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. You can also send details through our quote form.

Ask for a quote

Advice

Maintenance after handover

Your facilities or cleaning team can help the joints last. Pass these on to them:

  • Agree the fire-stopping specification before services go in
  • Flag new cables with no seal around them
  • Get seals inspected before ceilings and boxing close
  • Keep product data and details in the fire safety file

Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.

Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job compared with dozens found at once.

Accreditations

Trusted. Accredited. Insured.