Rhynie fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Rhynie. Send details for a fixed quote.
- Fire sealant pulled out of the opening
- Builders’ foam or ordinary silicone in compartment walls
- Penetration schedules that need working through
Fire stopping near Rhynie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Quoting for work in Rhynie
The price varies from site to site. It mainly depends on:
- How much existing material needs removing
- The site’s rules and procedures
- Working within restricted access windows
- How much there is to seal
We don’t publish prices, since every building and every scope is different. Call for a quote.
Details that help us quote
We can often quote from photos and a few details. It helps to include:
- The postcode of the building
- When you need the work done
- Any specification or named product
- Whether an asbestos survey exists
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or send photos by email.
Fire stopping in Rhynie
Facilities managers in Rhynie often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. Site teams most often ask us about unsealed joints where partitions meet the slab and builders’ foam or ordinary silicone in compartment walls, on cable penetrations, linear gaps at wall heads and pipe penetrations. Whoever orders the work in Rhynie, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
For a building near Rhynie, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Rhynie (AB54)
- Region
- Aberdeenshire
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What happens if it’s left?
Open penetrations multiply: each new service adds to the list. A schedule that is dealt with regularly stays manageable. For buildings near Rhynie, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you’re ready.
Why choose Mastic Doctor in Rhynie
- Workmanship guaranteed for 12 months
- Public liability insurance in place
- Failed material removed, not covered up
- Products installed to the manufacturer’s instructions
Read what affects the cost and how we’re accredited.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be any of the following:
- Reviewing a building’s overall fire safety
- Approving the work on behalf of building control
- Large openings beyond what any sealant detail covers
If you are not sure, just call 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Surfaces we seal
- Service gaps in risers
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
Compartment walls and floors in Rhynie
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
Around Rhynie, fire-stopping design belongs to the designer and building control; installation to the specification is our part. Around Rhynie, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Rhynie is about 17 miles west of Inverurie, in Aberdeenshire. Rhynie sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Rhynie is one of 179 places in Aberdeenshire on our list. For work in that direction, see our Aberdeen page, about 29 miles away.
We cover the AB54 postcode districts. For a building on Main Street, The Square and Sims Road or nearby, we can quote for service penetrations. Close to Rhynie, our area also takes in Cottown (1 mile south-east), Gartly (4 miles north-east), Kennethmont (4 miles east), Lumsden (4 miles south-west) and Backburn (5 miles north-east). Further afield, our area takes in Huntly (8 miles north), Alford (8 miles south-east) and Insch (8 miles east). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Around Rhynie
A little further out are Druminnor Castle (1 mile south-east).
Doing it in-house
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Surface by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed, and we work within it.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail, and we will never swap a specified collar for sealant.
Other services in Rhynie
Your questions answered
Do you design the fire stopping for buildings in Rhynie?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Is a smaller place like Rhynie outside your area?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Can the sealant be colour-matched?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
What do you charge?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
Can you quote from photos?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.
Diagnose, treat, sign off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs near Rhynie are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Point out any areas we must not close
- Flag any permit to work we’ll need
- Explain the parking and delivery arrangements
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.