Fire-rated sealing and fire stopping in Gartly, Aberdeenshire
Fire-rated and intumescent sealing of service penetrations and linear gaps in Gartly. CHAS accredited and fully insured, with a 12-month guarantee.
- Damaged fire seals in risers and voids
- Unsealed joints where partitions meet the slab
- Seals that don’t match their tested detail
Fire stopping in Gartly
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How the quote is worked out
The price varies from site to site. It mainly depends on:
- The site’s rules and procedures
- Specialist products, such as fire-rated or hygienic sealants
- Whether the work must be split into stages
- How accessible the joints are
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- Specification clauses that apply
- Access details, including height
- Approximate linear metres or a joint schedule
- The type of building and who uses it
To get a fixed quote, speak to us on 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
Fire stopping in Gartly, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on service gaps in risers, small duct penetrations where the tested detail allows and linear gaps at wall heads, and what we’re called in for most is damaged fire seals in risers and voids and seals that don’t match their tested detail. A specialist sealant contractor works differently from a general builder: on jobs in Gartly, preparation and product choice get the time they need.
Travel to smaller places like Gartly is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
We stand by our work with a 12-month guarantee. That covers our preparation and application.
- Where
- Gartly (AB54)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What happens if it’s left?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed, so earlier action pays back. Around smaller places like Gartly, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why clients in Gartly choose us
- Over 20 years of commercial sealing
- Constructionline member
- Work to your specification and the manufacturer’s guidance
- Health and safety: CHAS accredited
See our cost guide or our accreditations.
When something else is needed
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Walls or floors that aren’t fire-resisting to begin with
- Fire doors, dampers or other fire safety equipment
- Approving the work on behalf of building control
If you are not sure, just ring 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Where we work in Gartly
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
Questions we’re asked in Gartly
How do the Scottish rules apply to fire-rated sealing in Gartly?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Is hospital work, at somewhere like Jubilee Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Where services cross fire walls in Gartly
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
At a healthcare site like Jubilee Hospital, 4.4 miles to the north of Gartly, new services through compartment walls are a constant, and each needs the specified seal. For buildings in and around Gartly, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Gartly is about 17 miles north-west of Inverurie, in Aberdeenshire. Anywhere in AB54, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Aberdeenshire coverage takes in 179 places, large and small. Sites around Aberdeen have their own page, about 30 miles away.
Business premises anywhere in AB54 are within our area for service penetrations. If your site is on Old Military Road and Park Lane or close by, send details and we’ll quote for service penetrations. Nearby places we also cover include Backburn (1 mile north-east), Bridgend (2 miles north), Kennethmont (3 miles south-east), Rhynie (4 miles south-west) and Cottown (4 miles south) for service penetrations. Bigger towns within reach include Alford (11 miles south), Insch (7 miles east) and Aberchirder (14 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you ring 01277 525 020 or email a schedule or drawings.
Landmarks near Gartly
The closest station to Gartly is Huntly station, roughly 4.5 miles north. Nearby you’ll also find Druminnor Castle (3.8 miles south) and Jubilee Hospital (4.4 miles north). Green spaces nearby include Kye Hill.
Keeping the joints sound
After handover, a little attention goes a long way:
- Don’t let anyone top up a fire seal with the wrong product
- Ask which product is in place before decorating
- Flag new cables with no seal around them
- Record which product was used where
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Gartly are often grouped with others in the same area. Tell us how flexible your dates are.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Warn occupants and staff about the work
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, give us a call on 01277 525 020 or use the quote form.
Advice
What else we do in Gartly
Should maintenance staff do it?
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.