Fire-rated sealing and fire stopping in Cottown, Aberdeenshire
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Cottown and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Openings found when ceilings come down for a refit
- Improvised or mixed-product fire seals
- Fire seals cut back for extra cables and never reinstated
Need fire stopping in Cottown?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Cottown
Facilities managers in Cottown often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. Where there isn’t one, the designer or fire engineer needs to set one first. If you have unsealed openings around new pipes and cables and old intumescent sealant that has split away, we can put it right, whatever the surface. One point of contact handles commercial sealant work in Cottown from the first photos to the final walk-round, for single jobs and planned programmes alike.
For a building near Cottown, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Cottown (AB54)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Where services cross fire walls in Cottown
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. We install what’s specified, to the product’s tested detail.
Around Cottown, fire-stopping design belongs to the designer and building control; installation to the specification is our part.
Cottown is about 17 miles west of Inverurie, in Aberdeenshire. We cover commercial sites throughout Cottown. Cottown is one of 179 places we cover in Aberdeenshire. Our Aberdeen page has more on work in that area.
Business premises anywhere in AB54 are within our area for service penetrations. Sites close to Cottown are covered too, including Rhynie (1 mile north-west), Lumsden (3 miles south-west), Kennethmont (3 miles north-east), Gartly (4 miles north) and Backburn (5 miles north). Bigger towns within reach include Huntly (8 miles north), Kemnay (15 miles south-east), Alford (8 miles south-east) and Insch (8 miles east). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Near you in Cottown
Nearby you will also find Druminnor Castle (0.5 miles east).
On site: what to expect
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. Travel to smaller Scottish places like Cottown is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- For older buildings, check the asbestos register before work
- Confirm the product named in the specification
- Flag any permit to work we’ll need
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Related advice
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
When it isn’t the sealant
We check first that sealant really is the fix. It won’t put right:
- Deciding what a wall or floor needs, which belongs to the designer
- Reviewing a building’s overall fire safety
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, ring 01277 525 020 or email drawings and photos and we will say what we think before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
Questions we’re asked in Cottown
Is Cottown too far out for you?
No. Small places get the same service as large ones. We work across every Scottish council area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you produce the fire-stopping design for a job in Cottown?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will plan around them. Our office runs Monday to Friday, 8am until 5pm.
Quoting for work in Cottown
To price the job, we consider:
- Any access equipment needed
- Site requirements such as inductions and permits
- Quantities, in metres or numbers
- Whether the work must be split into stages
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Sending details for a quote
There’s no need for a formal survey. A few details are enough to get going:
- Any specification or named product
- Any dates the work must fit around
- Photos of the joints, close up and from further back
- Access details, including height
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.
Different surfaces, different methods
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Also near Cottown
What else we do in Cottown
What we’re called out for in Cottown
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
Any of the following is a good reason to get the joints checked over:
- Improvised or mixed-product fire seals
- Damaged fire seals in risers and voids
- Hidden openings found during inspections
- Fire-stopping items raised at inspection or handover
Buildings near Cottown get the fire-rated product that’s specified, installed to its tested detail.
Comparing quotes
- How they handle RAMS and site documents
- Are they CHAS accredited or on Constructionline?
- How joint depth will be controlled
- Is the sealant right for the movement and the substrate?