Expansion Joint Sealing in Gartly
Expansion and movement joint sealing in walls, decks and floors in Gartly and across Aberdeenshire. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Weathered movement joint sealant that no longer flexes
- Car park joints leaking onto vehicles below
- Torn sealant in brick or block movement joints
Expansion joint sealing in Gartly
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
After the work
After handover, a little attention goes a long way:
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Keep traffic off new joints until the cure time is up
- Inspect exposed joints once the cold weather has passed
- Plan racking layouts so feet don’t land on a joint
Fresh joint sealant needs its full cure time before it takes traffic or water. The time varies with product, conditions and joint depth, and we confirm it for each area before we leave. Keeping the area coned off until then avoids tyre marks and damage.
Rain gets into walls through torn brick and block movement joints. It can surface inside as damp a long way from the joint, well after the seal first opened. Catching it early keeps the water outside.
Expansion joint sealing in Gartly
Brickwork and blockwork walls have vertical movement joints at intervals. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied. If you have sealant pulling off the joint face and weathered movement joint sealant that no longer flexes, we can put it right. Looking for mastic applicators who cover Gartly? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
For outside joints near Gartly, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Inside slabs aren’t affected and can be scheduled around the occupier.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Gartly (AB54)
- Region
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Also in Gartly
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Joints too narrow for the movement, which need redesigning by the engineer
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we will tell you honestly before you book.
Joints and surfaces we work on
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Blockwork control joints
Why deal with it now?
Leaving a failed movement joint rarely stays a small problem. Grit and water fill the gap and the material either side breaks up and the job grows to repairs as well as sealing. Resealing early keeps the work to sealant. For buildings near Gartly, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor in Gartly
- 12 months’ guarantee on every job
- CSCS-carded applicators
- Work to your specification and the manufacturer’s guidance
- Failed material removed, not covered up
Read our cost guide and our accreditations.
Cost factors for movement joints
The price varies from site to site. It mainly depends on:
- Site requirements such as inductions and permits
- Which sealant the job calls for
- The total length or number of joints
- The size and state of each joint
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you are ready.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Specification clauses that apply
- Whether an asbestos survey exists
- What the building is and how it’s used
- The site address and postcode
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Questions we’re asked in Gartly
Is Gartly off your patch?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Must our site in Gartly stop work while the joints are done?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Do you use silicone or polyurethane in movement joints?
It depends on the movement, exposure and traffic. Low-modulus neutral-cure silicone suits many facade joints, while polyurethane is common in trafficked floor and deck joints unless the specification names something else.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Why do our movement joints keep failing?
Most often the movement is too much for the product or the joint width. That’s why we check width, depth and movement class before quoting, rather than replacing like for like.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Where floor joints take the most wear near Gartly
Being in the east of Scotland, Gartly gets less rain than the west coast. Frost and winter road salt still work into open joints in car parks and yards. Resealing before the cold months helps protect the edges.
For floors and slabs around Gartly, the product is chosen for the traffic and the movement at each joint. Hospital campuses such as Jubilee Hospital (to the north of Gartly) grow in stages, leaving movement joints wherever new blocks meet old.
Gartly is about 17 miles north-west of Inverurie, in Aberdeenshire. Across the AB54 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. Our Aberdeen page has more on work in that area, about 30 miles away.
If you need expansion joint sealing in AB54, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Old Military Road and Park Lane or close by, send details and we will quote for movement joints. Close to Gartly, our area also takes in Backburn (1 mile north-east), Bridgend (2 miles north), Kennethmont (3 miles south-east), Rhynie (4 miles south-west) and Cottown (4 miles south). Bigger towns within reach include Alford (11 miles south), Insch (7 miles east) and Aberchirder (14 miles north-east). Where a site is remote or on an island, travel and materials need planning ahead.
What’s near Gartly
For rail, the closest station is Huntly station, roughly 4.5 miles north of the centre. A little further out are Druminnor Castle (3.8 miles south) and Jubilee Hospital (4.4 miles north). Not far away are Kye Hill.
Surface by surface
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. We use a sealant made for wheel loads and the expected movement with bays done in phases so the car park keeps running.
Joints between different materials
Hybrid or MS polymer sealants bond to many substrates. We pick the product for the materials and the movement, and confirm it in the quote.
On site: what to expect
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. Where we can, we combine work around Gartly with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- We look at the joints, their width and how they’ve failed.
- A fixed quote follows, naming the sealant and its movement class.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
Before we start on site
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or email the details over to discuss it first.