Fire-rated sealing and fire stopping in Contin, Highland
Need fire stopping in Contin? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire sealant pulled out of the opening
- Openings found when ceilings come down for a refit
- Seals that don’t match their tested detail
Fire stopping in Contin
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Contin
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail. If you have open linear gaps along the top of fire-resisting walls and fire seals cut back for extra cables and never reinstated, we can help, on service gaps in risers, cable penetrations and pipe penetrations alike. For commercial sealant work in Contin, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For a building near Contin, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photographs of the openings, with sizes if you have them.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Contin (IV14)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the quote is worked out
We price every job individually. The things that drive the figure:
- Working within restricted access windows
- Travel to remote or island sites
- Induction, permit and paperwork requirements
- Whether old sealant has to be cut out first
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Clear photographs of the problem areas
- Access details, including height
- Rough lengths or quantities, or drawings if you have them
- Asbestos survey details if the building is older
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or email a schedule or drawings.
Do you need fire stopping in Contin?
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
If one of these sounds familiar, it’s time for a closer look:
- Fire sealant pulled out of the opening
- Improvised or mixed-product fire seals
- Snag lists that include open service penetrations
- Hidden openings found during inspections
In a building such as Contin Church Of Scotland Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Comparing quotes
- Will CSCS-carded applicators be on site?
- Their pre-qualification and accreditations
- Their public liability cover
- How they’ll work around occupants
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For work around Contin, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Share the asbestos register for older buildings
- Send your site hours and access windows
- Clear stock, furniture or equipment away from the joints
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Related advice
Fire-rated sealing for Contin buildings
Several hotels sit less than 2 miles from Contin. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
In a hotel such as Coul House Hotel, 0.6 miles to the south-east of Contin, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Contin (Gaelic: Cunndainn) is about 15 miles north-west of Inverness, in Highland. We send applicators to Contin for service penetrations, handled exactly as we handle every other area. 256 places across Highland fall within our area, Contin among them.
Commercial sites across IV14 are covered. Streets here include Woodland Park and Craigdarroch Drive, and sites on any of them can send details for a fixed quote. Just outside Contin, we also work in Strathpeffer (1 mile east), Marybank (3 miles south-east), Blairninich (3 miles north-east), Garve (5 miles north-west) and Maryburgh (5 miles east). Further afield, our area takes in Inverness (15 miles south-east), Merkinch (14 miles south-east), Dingwall (6 miles east), Alness (15 miles north-east), Crown (15 miles south-east) and Millburn (15 miles south-east). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Around Contin
Contin’s nearest station is Garve station, roughly 4.7 miles north-west. Well-known places in the area include Highland Museum of Childhood (1.8 miles north-east) and Brahan Castle (3.7 miles south-east). Green spaces nearby include Loch na Crann and Tollie Red Kites RSPB Reserve.
Why deal with it now?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Renewing every failing joint on one visit is the sensible approach for a place like Contin. Send photos and we’ll quote for everything together.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
Why us?
- Failed material removed, not covered up
- Specification-led, product-correct work
- 12 months’ guarantee on every job
- Commercial sealant work since 2005
Take a look at what affects the cost and how we’re accredited.
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Contin: questions and answers
Is a smaller place like Contin outside your area?
Not at all. Contin is within our area. Our area covers all of Scotland, cities, towns and islands alike. Good photos up front let us bring everything on the first visit.
Can you seal penetrations in a hotel in Contin after a refit?
Yes, to the specification and the product’s tested detail. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Is the work guaranteed?
Yes. Workmanship is guaranteed for 12 months on every job.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Towns and villages near Contin
Other services in Contin
Different surfaces, different methods
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance along with any permits your site needs.
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail, and we’ll never swap a specified collar for sealant.