Fire-rated sealing and fire stopping in Conon Bridge, Highland
Fire stopping in Conon Bridge, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Penetration schedules that need working through
- Service penetrations left open after M&E works
- Fire-rated sealant that has cracked or shrunk back
Fire stopping near Conon Bridge
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Conon Bridge, done properly
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal rather than guesswork. Site teams most often ask us about openings found when ceilings come down for a refit and damaged fire seals in risers and voids, across cable penetrations, small duct penetrations where the tested detail allows and linear gaps at wall heads. Whoever orders the work in Conon Bridge, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Travel to smaller places like Conon Bridge is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, call the office on 01277 525 020 or email us and we will arrange a return visit.
- Location
- Conon Bridge (IV7)
- Region
- Highland
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Fire stopping in Conon Bridge: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified. There are a number of hotels within about 2 miles of Conon Bridge. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
Wherever services are added at a hospital such as Ross Memorial Hospital (to the north of Conon Bridge) the compartment line has to be made good with the specified product. Holiday works at schools like Dingwall Academy often leave service openings to seal before pupils return. Hotels like Conon Bridge Hotel (to the north-west of Conon Bridge) are refurbished in phases, and each phase can open up compartment walls.
Conon Bridge is about 10 miles north-west of Inverness, in Highland. If you are looking for fire stopping in Conon Bridge, we can help. Conon Bridge is one of 256 places in Highland on our list for service penetrations.
Anyone looking for fire stopping in IV7 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Station Road, High Street and Leanaig Road, and sites on any of them can send details for a fixed quote. Conon Bridge sits on or close to the A862 and B9162, useful when we plan access and materials. Sites close to Conon Bridge are covered too, including Maryburgh (1 mile north-west), Easter Kinkell (2 miles east), Dingwall (3 miles north), Muir of Ord (3 miles south) and Blairninich (4 miles north-west). Further afield, our area takes in Inverness (10 miles south-east), Cradlehall (12 miles south-east), Merkinch (9 miles south-east), Hilton (11 miles south-east), Alness (11 miles north-east) and Invergordon (13 miles north-east). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Landmarks near Conon Bridge
Locally, jobs take us to sites close to Conon Hotel, among other places. There’s a railway station in Conon Bridge itself: Conon Bridge station. Other landmarks nearby include Ross Memorial Hospital (2.1 miles north) and Brahan Castle (2.2 miles west). Not far away are Loch Ussie and Tollie Red Kites RSPB Reserve.
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Conon Bridge can sit alongside others in a wider programme.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Diagnose, treat, sign off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. Tell us who will meet us and how to get in at your building near Conon Bridge. That goes into the plan alongside the quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
- Make sure the joints can be reached
Get a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Read more
Also near Conon Bridge
Other services in Conon Bridge
Your questions answered
Can you seal around new services in a hotel near Conon Bridge?
Yes. We install fire-rated and intumescent sealant where it is specified. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
Is Conon Bridge too small for you to travel to?
No. Places such as Conon Bridge are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Can you work to our specification?
Yes. Send it with your enquiry, and we’ll price the work to it, flagging anything that needs clarifying.
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Signing off or certifying a building’s fire stopping
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Fire risk assessments, a job for a competent assessor
If in doubt, speak to us on 01277 525 020 or email drawings and photos and we will say what we think.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Linear gaps at wall heads
Quoting for work in Conon Bridge
What shapes the price:
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
- The total length or number of joints
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- The postcode of the building
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
- How the joints are reached, and at what height
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, phone 01277 525 020 or use the quote form.
Different surfaces, different methods
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.
Small ducts
Ducts are only sealed with sealant where the detail allows it. The ductwork, its supports and any dampers are for the ductwork contractor.
Why act early in Conon Bridge
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down, and the right detail can be checked at the time. Around smaller places like Conon Bridge, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why us?
- Public liability insurance in place
- CHAS accredited contractor
- Joints cleaned back to sound surfaces
- 12 months’ guarantee on every job