Expansion joint sealing in Contin
Expansion and movement joint sealing in walls, decks and floors in Contin and across Highland. CHAS accredited and fully insured, with a 12-month guarantee.
- Joints packed with grit and debris
- Rain penetration at brick or block movement joints
- Previous reseals laid over old sealant
Need expansion joint sealing in Contin?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Contin
Our movement joint work takes in walls, panels, decks and floors: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. Every one calls for a sealant picked for its movement, exposure and traffic. If you’re dealing with damp inside where a wall movement joint has failed and water dripping through deck or ramp joints, we can help, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Contin is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For outside joints near Contin, the Scottish weather sets the timetable: dry faces and the right temperature are essential, so dates have some give. Internal floors can be done whenever suits the site.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Contin (IV14)
- Wider area
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:
- Damaged metal nosings or cover plates over a joint
- Waterproofing layers buried beneath the sealant
- Broken or spalled joint edges, which need repairing before any sealant goes in
If you’re not sure, just call the office on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Joints and surfaces we work on
- Brickwork movement joints
- Blockwork control joints
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For work around Contin, we aim for one trip, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Move anything stored against the joints
- Agree which areas must stay open
- Share your working hours and any access restrictions
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or send photos by email if you’d rather talk the job through.
Read more
Joints that move: notes for Contin
Being in the west of Scotland, Contin gets more rain than eastern areas. Open joints in car parks and yards let in more water than in drier areas. External sealing is booked for dry spells, with some give in the dates.
Around Contin, open joints collect water and debris, and the arrises are the next to go. Around Contin, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Contin (Gaelic: Cunndainn) is about 15 miles north-west of Inverness, in Highland. Across the IV14 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Highland coverage takes in 256 places.
We cover the IV14 postcode districts. Buildings on Woodland Park and Craigdarroch Drive are within our area. Just outside Contin, we also work in Strathpeffer (1 mile east), Marybank (3 miles south-east), Blairninich (3 miles north-east), Garve (5 miles north-west) and Maryburgh (5 miles east). Nearby towns on our patch include Inverness (15 miles south-east), Merkinch (14 miles south-east), Dingwall (6 miles east), Alness (15 miles north-east), Crown (15 miles south-east) and Millburn (15 miles south-east). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Local landmarks in Contin
For rail, the closest station is Garve station, about 4.7 miles north-west of the centre. Other landmarks nearby include Highland Museum of Childhood (1.8 miles north-east) and Brahan Castle (3.7 miles south-east). Green spaces nearby include Loch na Crann and Tollie Red Kites RSPB Reserve.
When to bring in a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Clear dirt from joint lines during routine cleaning
- Check joints after long freezing spells
- Note which joints were done, when, and with what
- Act on the first tear or lifting edge rather than waiting
Debris does more harm to joint sealant than most people realise. Stones pressed into the bead by wheels or feet can puncture it, especially on car park decks and warehouse floors. Regular sweeping keeps joint lines clear.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles. Resealing early limits the damage.
Places near Contin
More services for Contin
Common questions from Contin clients
Must our site in Contin stop work while the joints are done?
Usually not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
What paperwork can you provide for a job in Contin?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
How much does the work cost?
We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.
Why do our movement joints keep failing?
The way it has failed usually tells us why: tearing down the centre means too much movement, and lifting off one side means poor adhesion. Sometimes the edge material itself has failed.
Do you offer coloured sealant?
It depends on the product. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Can you seal joints in cold or wet weather?
Weather matters for any external joint: rain, frost and condensation all stop sealant bonding. Indoor joints can normally carry on regardless.
Why deal with it now?
Combining joint work with other maintenance reduces set-up costs. Leaking joints need sealing now, as damage continues meanwhile. We can split the scope into urgent and planned. For buildings near Contin, dealing with all the failing joints at once saves return trips. Send photos and we will quote for everything together.
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
What you get with us
- A range of standard colours, depending on the product
- One phone line for London, the South East and Scotland
- Constructionline member for supplier checks
- Colours chosen to suit frames, cladding or finishes where possible
See our cost guide or our accreditations.
Different surfaces, different methods
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement flagging broken arrises before sealing.
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. The product must bond to both substrates and cope with the movement.