Floor Joint Sealing contractors in Hollingbury
Planning work on a floor joint in Hollingbury? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Brittle joint filler breaking up
- Broken arrises where pallet trucks cross
- Unfilled floor joints collecting dirt and grit
Need floor joint sealing in Hollingbury?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Honest limits
Some faults sit outside our scope, and we say so rather than covering them up:
- Worn screed or surface finishes
- A floor that rocks at the joints, which needs a structural fix
- Wide or random cracking that suggests a structural issue
If you are not sure, just give us a call on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Surfaces we seal
- Saw-cut induced joints
- Construction joints
- Loading bays
- Forklift and pallet-truck routes
- Retail and showroom floors
- Joints along racking aisles
Floor joint sealing in Hollingbury
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. We work on loading bays, saw-cut induced joints and forklift and pallet-truck routes, and the failures we’re asked to look at most are sealant pulled out along a truck route and drivers complaining about joints on a route. For commercial sealant work in Hollingbury, you deal with one contact from quote to sign-off, whether it’s one building or several.
Small units near places like Hollingbury are often converted farm buildings with new concrete floors. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Hollingbury (BN1)
- Region
- Brighton and Hove
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Also near Hollingbury
More services for Hollingbury
Why act early in Hollingbury
Dirt and spillage gather in open joints, out of reach of the floor cleaner. In shops, showrooms and clean production areas that matters for hygiene and appearance. Filled joints are far simpler to keep clean. In a smaller place such as Hollingbury, getting a contractor back for a second visit takes time, so we’d suggest renewing all the joints that are going, not just the worst.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What you get with us
- Sealing commercial buildings since 2005
- 12-month guarantee on workmanship
- Fully insured
- Work carried out by CSCS-carded applicators
Read what affects the cost or our accreditations and insurance.
Floors, slabs and movement joints in Hollingbury
Hollingbury sits close to the coast, within about 3 miles. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Hollingbury is about 44 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.
Campuses like University of Brighton Moulesecoomb Campus (1.2 miles south-east of Hollingbury) mix old and new buildings, with movement joints wherever they meet. Hospitals like Brighton General Hospital, 2.1 miles south of Hollingbury, have multi-storey or surface car parks whose joints carry vehicles round the clock. Retail centres such as Pavilion Retail Park (to the south of Hollingbury) have floors, service yards and car parks with joints under constant traffic.
Hollingbury is about 2 miles north of Brighton, in Brighton and Hove. We cover commercial sites throughout Hollingbury. 29 places across Brighton and Hove fall within our area, including Hollingbury.
Commercial sites across BN1 are covered. If your site is on Keymer Road, Warmdene Road and Carden Avenue or close by, we can quote for floor joints. Close to Hollingbury, our area also takes in Patcham (1 mile west), Withdean (1 mile south-west), Hollingdean (1 mile south), Preston (1 mile south-west) and Westdene (1 mile west). Nearby towns on our patch include Brighton and Hove (3 miles south-west), Hove (3 miles south-west), Brunswick (3 miles south), Portslade (4 miles west), Kemptown (3 miles south) and Whitehawk (3 miles south-east).
What’s near Hollingbury
Locally, jobs take us to sites close to University of Sussex Library, Patcham High School and Wild Park and the streets around them. Also close by are The Dharma Primary School (0.5 miles north-west) and County Oak pub (less than half a mile north-east). For rail, the closest station is Moulsecoomb station, about 1.1 miles south-east of the centre. A little further out are Brighton General Hospital (2.1 miles south) and Churchill Square (2.6 miles south). Not far away are Ladies Mile and Ditchling Beacon.
Commercial clients in Hollingbury
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Your questions answered
Can you work on a hospital site such as Brighton General Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Hollingbury off your patch?
Not at all. Hollingbury is within our area. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we’ll price the work to it, flagging anything that needs clarifying.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How soon can traffic go back on the floor?
The wait is set by the product’s cure time and cooler floors take longer. We plan the phasing so that waiting time fits your operation.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, which many sites require.
Quoting for work in Hollingbury
Each job is priced on its own details. The things that drive the figure:
- Phasing around occupants
- The size and state of each joint
- How much there is to seal
- Travel to remote or island sites
We don’t publish prices, since every building and every scope is different. Call for a quote and we will price your job on its own details.
Sending details for a quote
It doesn’t need to be a full survey. These details are enough to start:
- What the building is and how it’s used
- The asbestos register, for older buildings
- Anything awkward about access or site hours
- Where the site is, with the postcode
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or send photos by email with what you know.
Looking after the joints
Regular inspection catches problems early. Specifically:
- Treat loading bay joints first if they’re failing
- Sweep debris out of open joints until they can be filled
- Remind operators to lift rather than drag
- Respect the cure time before traffic returns
We’ll give you a time before trucks can run over the new joints and it pays to stick to it. Cones or barriers stop the first driver cutting the corner.
Regular inspection catches failing fills before the edges go. A phased plan, worst routes first, spreads the work out so nothing is left to fail.
Diagnose, treat, sign off
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking a day or more, depending on the metres of joint and how many zones the floor is split into. What matters most for a job in Hollingbury is a clear list of what needs doing. You’ll then get a fixed price for the work.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Before we start on site
- Point out parking and an unloading spot
- Share your working hours and any access restrictions
- For older buildings, check the asbestos register before work
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.