Expansion joint sealing in Caputh
Expansion and movement joint sealing in walls, decks and floors in Caputh. CHAS accredited and fully insured, with a 12-month guarantee.
- Arrises breaking up along floor joints
- Hardened, cracked sealant on exposed facades
- Damp inside where a wall movement joint has failed
Expansion joint sealing for businesses in Caputh
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing for commercial buildings in Caputh
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1 and the bead bonds to the sides, never the back. We work on cladding panel joints, brickwork movement joints and precast concrete panel joints, and what we are called in for most is water dripping through deck or ramp joints and sealant peeling off one face of the joint. Looking for mastic applicators who cover Caputh? We’ve been sealing commercial buildings since 2005.
In smaller places such as Caputh, the joints we are asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Caputh (PH1)
- Region
- Perth and Kinross
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Inspect movement joints alongside other routine building checks
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Keep scrapers and ploughs from dragging across joint sealant
- Note which joints were done, when, and with what
Debris does more harm to joint sealant than most people realise. Grit trodden or driven into the joint works at the surface until it tears, especially on car park decks and warehouse floors. Regular sweeping keeps joint lines clear.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers, and the damage spreads along the joint. Keeping the filler or sealant sound protects the floor.
Caputh: questions and answers
What documents will you need to give us for a job in Caputh?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Is Caputh too far out for you?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
What will the job cost?
We don’t publish prices, because every site is different. Send photos or drawings and we will price it at a fixed figure.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we’ll price the work to it.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Can you work while the building is occupied?
Normally, yes. We phase the work so most of the building stays in use.
How do we ask for a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
What we can’t put right
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Concrete or masonry repairs along the arrises
- Proprietary pre-formed expansion joint systems
- Waterproofing layers buried beneath the sealant
Not sure which it is? You can phone 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Where we work in Caputh
- Blockwork control joints
- Podiums and floor movement joints
- Brickwork movement joints
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself typically taking a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints. Jobs near Caputh are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Warn occupants and staff about the work
- Have the specification and drawings to hand
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or send details through our quote form.
Read more
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- The total length or number of joints
- The product specified
- Working within restricted access windows
- Distance, for remote addresses
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
A few photographs plus some basic facts will normally do. Please tell us:
- Clear photographs of the problem areas
- The site address and postcode
- Whether an asbestos survey exists
- The type of building and who uses it
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Slabs, ramps and loading bays in Caputh
The east of Scotland, where Caputh is, gets less rain than the west. Frost and winter road salt still work into open joints in car parks and yards. Sealing them in drier months limits winter damage.
A joint near Caputh that has lost its sealant lets in water and grit, and the edges suffer next; we will tell you if the edges need repairing first. For floors and slabs around Caputh, the product is chosen for the traffic and the movement at each joint.
Caputh is about 7 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH1 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Caputh is one of 114 places we cover in Perth and Kinross. There’s a separate page for Dundee, roughly 20 miles from Caputh.
We cover the PH1 postcode districts for movement joints. If your building is just outside Caputh, we cover Middleton (1 mile west), Gellyburn (1 mile south-east), Murthly (1 mile south-east), Spittalfield (1 mile north-east) and Bankfoot (3 miles south). Nearby towns on our patch include Perth (10 miles south), Blairgowrie and Rattray (7 miles north-east), Letham (10 miles south), Scone (9 miles south), Pitlochry (14 miles north-west) and Tulloch (9 miles south).
Around Caputh
The closest station to Caputh is Dunkeld & Birnam station, about 3.6 miles west of the centre. Other landmarks nearby include Murthly Castle (1 mile west). Green spaces nearby include Lily Loch and Birnam Hill.
Different surfaces, different methods
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors, with a flexible sealant where movement is larger.
Brickwork and blockwork joints
Brick and block edges need careful preparation. Faces are prepared and primed wherever the sealant maker calls for it before the bead goes in.