Expansion joint sealing in Pitlochry
Expansion joint sealing for Pitlochry, from a contractor working since 2005. Fully insured and CHAS accredited.
- Layers of sealant in a movement joint
- Water getting into the wall through a failed joint
- Joints where the bead has lost adhesion
Expansion joint sealing for Pitlochry sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Expansion joint sealing in Pitlochry
Long runs of brick or block have movement joints built in. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied. If you are dealing with arrises breaking up along floor joints and joints packed with grit and debris, we can put it right. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Pitlochry, preparation and product choice get the time they need.
For floor or movement joints around smaller places like Pitlochry, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
Work we carry out in Perth and Kinross comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email the details over and we’ll come back to it.
- Place
- Pitlochry (PH16)
- Wider area
- Perth and Kinross
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Movement on a scale no sealant is meant to absorb
- Leaks coming from the membrane rather than the joint seal
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
Not sure which it is? You can phone 01277 525 020 or email a schedule or drawings and we’ll tell you honestly.
Where we work in Pitlochry
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps
- Cladding panel joints
- Precast concrete panel joints
- Blockwork control joints
Floors, slabs and movement joints in Pitlochry
Pitlochry is in the east of Scotland, which is drier than the west. Freezing weather and salt still attack open external joints. Resealing before the cold months helps protect the edges. Two named trading, business or retail sites lie within about 3 miles of Pitlochry. Their warehouses, yards and car parks are exactly where joints take the most punishment.
At places like Aldour Industrial Estate, 0.8 miles south-east of Pitlochry, joints are sealed a section at a time so operations carry on. Hospital campuses such as Pitlochry Community Hospital, under half a mile south-west of Pitlochry, grow in stages, leaving movement joints wherever new blocks meet old. Parks like Fonab Business Park, 0.6 miles south-west of Pitlochry, combine paved areas, car parks and building elevations, each with joints that move.
Pitlochry is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Pitlochry sits inside our coverage and the rest of Perth and Kinross, with the same fixed quotes and 12-month guarantee as everywhere else. 114 places across Perth and Kinross fall within our area, Pitlochry among them. For work in that direction, see our Dundee page (33 miles or so).
Business premises anywhere in PH16 are within our area. Among the streets we cover are Church Road, Station Road and Well Brae. Main routes into Pitlochry include the A924, useful when we plan access and materials. Nearby places we also cover include Port na Craig (1 mile south), Moulin (1 mile north), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (4 miles south-west). Pitlochry is one of the busier places in Perth and Kinross, and its commercial and public buildings are all within our area.
Around Pitlochry
We work on buildings around Faskally Forest and The Old Mill Inn, among other places. There’s a railway station in Pitlochry itself: Pitlochry station. Other landmarks nearby include Pitlochry Community Hospital (under half a mile south-west) and Atholl Palace Museum (less than half a mile south-east). For a walk, there’s Loch na Bà.
Nearby places to Pitlochry
Also in Pitlochry
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Where we can, we combine work around Pitlochry with other jobs nearby. Tell us how flexible your dates are.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- For older buildings, check the asbestos register before work
- Point out any areas we must not close
- Send your site hours and access windows
Request a quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email us.
Read more
Your questions answered
Is Pitlochry off your patch?
Not at all. Pitlochry is within our area. We cover the whole of Scotland. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you work at a site such as Fonab Business Park, by Pitlochry?
Yes. Estates, retail parks and business parks around Pitlochry, Fonab Business Park among them, are all within reach. To start, just call the office on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Why do our movement joints keep failing?
The common causes are poor preparation, three-sided adhesion, the wrong movement class and weathering. We diagnose which one it is before resealing.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Can you seal joints in cold or wet weather?
Weather matters for any external joint. Indoor joints can normally carry on regardless.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
What will the job cost?
Every job gets its own fixed quote. For yours, give us a call on 01277 525 020 or send photos by email.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Share these points with them:
- Raise snow-clearing blades over deck joints where possible
- Avoid parking heavy plant or pallets on joint lines
- Clear dirt from joint lines during routine cleaning
- Look over external and deck joints after a hard winter
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in and long before edges start to break. Should you spot a problem, you can call 01277 525 020 or email the details over and send a picture.
On a multi-storey car park, a failed joint usually shows up as a leak onto the deck underneath. That water often carries de-icing salts with it. Resealing early limits the damage.
Surface by surface
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces priming where the maker calls for it.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler and a flexible sealant where the joint moves more.
Cost factors for movement joints
A fixed quote reflects the actual work. It takes account of:
- Travel to remote or island sites
- Site requirements such as inductions and permits
- How much there is to seal
- The product specified
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- When you need the work done
- What the building is and how it’s used
- Anything awkward about access or site hours
- Whether an asbestos survey exists
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.