Scotland

Commercial sealant contractors in Perth and Kinross

Commercial sealant, construction mastic and joint sealing in all 114 towns and villages of Perth and Kinross, done properly and a fixed quote before we start.

Sealant work across Perth and Kinross

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Send your details 01277 525 020

Services in Perth and Kinross

Every service below opens a full list of the places we cover in Perth and Kinross; the A to Z further down lists each town and village.

Larger towns

Commercial sealant contractors across Perth and Kinross: what to expect

Getting a price for commercial sealant contractors in Perth and Kinross doesn’t need to be drawn out. Send photos, drawings or a schedule of the joints through our quote form; you can also call 01277 525 020 or email the details over with the details. Where the photographs don’t tell the full story, we arrange a site visit. We work on kitchen worktops and splashbacks, movement joints in walls and floors and washrooms and tea points, and the usual reasons a site gets in touch are water staining near frames, panels or ceilings and expansion joints with the sealant torn out.

The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it.

Send details through our quote form, or ask for a site visit.
We diagnose the cause of failure and price a fixed scope.
Where parts of the building must stay open, the work is phased.
Every failed bead is removed rather than covered.
A suitable product for each joint goes in at the right depth and is tooled.
We check the work with you, and the 12-month guarantee starts.

Pricing in Perth and Kinross

Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.

Why appoint us

CSCS-carded applicators
Constructionline member for supplier checks
One contact handling all your sites
Commercial sealant work since 2005

Get a fixed quote

Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.

What’s near Perth

Locally, jobs take us to sites close to Public House, St John's Academy and Perth High School. Perth’s nearest station is Perth station, roughly 0.7 miles south-east. Nearby you’ll also find Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). For a walk, there’s St Magdalene's Hill.

Shops, offices and hotels in Perth and Kinross

Commercial buildings across Perth and Kinross range from older premises altered many times to recent units on business parks. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.

Tenements in Scotland’s cities are often managed by property factors, with shared repairs agreed by the owners, so mastic work on shared parts may come through the factor. Parts of Perth and Kinross lie on or near the coast, where wind-driven rain and, closer to the shore, salt air are harder on external joints. We take that exposure into account when choosing the product.

Perth: Shops and cafés around stations like Perth station (to the south-east of Perth) trade from early, so work is timed around them. If you look after units at a retail site such as St Catherine's Retail Park (less than half a mile east of Perth), shopfront perimeters and shop-fit joints are where a matched colour shows.

When something else is needed

Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is any of the following:

A dripping trap, valve or pipe behind a fitting
Suspect materials that need testing and specialist removal
Faulty windows rather than failed perimeter sealant

What we’re called out for in Perth and Kinross

In wet areas the enemy is usually mould rather than movement. Constant moisture, cleaning chemicals and weak extraction let mould grow into the sealant; when mould is in the body of the sealant, no cleaner will shift it. Replacement with a sanitary anti-mould silicone is the lasting answer.

Things that usually lead to an enquiry:

Frame mastic that has hardened and come away from the wall
Weathered facade sealant that no longer flexes
Smeared sealant across finishes from a rushed job
Gaps behind commercial kitchen worktops and sinks

Keeping the joints sound

Once the work is signed off, these steps help:

Check the asbestos register before anyone disturbs old sealant in an older building
Note dates and locations of sealant work for future planning
Deal with small splits before they become leaks
Keep barriers up until the new sealant has cured

Brief your cleaning team on the joints that have been resealed. Abrasive pads, scrapers and some strong chemicals damage sealant surfaces, while a neutral cleaner and a soft cloth do no harm.

Once sealant fails in a movement joint, grit and debris get in. With nothing soft to close against, the materials either side take the load and start to break up. That turns a sealant job into something bigger.

How the job changes by surface

Washrooms and toilets

Washroom joints take water, cleaning chemicals and constant use. We cut out mouldy or split beads and reseal in anti-mould sanitary silicone.

Window and door perimeters

Where frames meet the surrounding wall, sealant is the weather line. Failed perimeters are cut out and cleaned, backing goes into deeper gaps, and the joint is resealed with a low-modulus neutral-cure silicone or another suitable product.

Why act early?

It can be tempting to hold sealant work back until the next refurbishment. That’s reasonable for internal joints that are just tired-looking, but external and wet-area joints that already leak shouldn’t wait. Splitting the scope into now and later is often the sensible compromise.

What your quote should include

Whether old or failed sealant will be cut out, not overlaid
The terms of the workmanship guarantee
What level of public liability insurance do they hold?
How they handle RAMS and site documents

Common questions from Perth and Kinross clients

How long will the new sealant last?

It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.

When can the area be used after sealing?

We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.

How long does a typical visit take?

It depends on the scope, but the work typically takes a few hours for one area, or a planned series of visits across a bigger building. Larger or phased jobs take longer, and we will give you a timescale with the quote.

Does commercial sealant work come with a guarantee?

Our workmanship on each job is backed by a 12-month guarantee. We’re fully insured for public liability as well.

Do you cover Perth and Kinross?

Yes. We take on work across Perth and Kinross.

Do your applicators hold CSCS cards?

Yes. Our applicators hold CSCS cards, which many sites require.

How do you choose the sealant?

Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.