Expansion and movement joint sealing in Letham, Perth and Kinross
Work needed on a movement joint in Letham? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Layers of sealant in a movement joint
- Expansion joints filled with dirt and stones
- Joints where the bead has lost adhesion
Expansion joint sealing for Letham sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Letham
We have been sealing expansion and movement joints for over 20 years. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. Most enquiries involve new sealant over old, now failing and water dripping through deck or ramp joints, across car park decks and ramps, podiums and floor movement joints and brickwork movement joints. Looking for mastic applicators who cover Letham? We’ve been sealing commercial buildings since 2005.
Around smaller Scottish places like Letham, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Letham (PH1)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Expansion joint sealing in Letham: the local picture
Being in the east of Scotland, Letham gets less rain than the west coast. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them in drier months limits winter damage. The 3 miles around Letham take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Another example is Inveralmond Business Centre, 1 mile to the north of Letham, where floors and yards would be done in stages around the occupiers. On a site such as Broxden Business Park, 0.9 miles to the south of Letham, the movement joints are in car park slabs, paving and building elevations. Hospital campuses such as Perth Royal Infirmary, 0.9 miles to the south-east of Letham, grow in stages, leaving movement joints wherever new blocks meet old.
Letham is about 1 mile west of Perth, in Perth and Kinross. Looking for expansion joint sealing in Letham? We can help. 114 places across Perth and Kinross fall within our area, Letham among them. Our Dundee page has more on work in that area.
We take on movement joints across the PH1 postcode area, whatever the building. Among the streets we cover are Elm Lane, Leny Road and Fittis Road. Nearby places we also cover include Hillyland (1 mile north-west), Huntingtower (1 mile north-west), Tulloch (1 mile north), Ruthvenfield (1 mile north-west) and Scone (3 miles north-east). Bigger towns within reach include Blairgowrie and Rattray (14 miles north), Crieff (14 miles west), Auchterarder (11 miles south-west), Kinross (13 miles south), Coupar Angus (13 miles north-east) and Rattray (14 miles north-east). Among the larger centres in Perth and Kinross is Letham, and we take on movement joints for its commercial and public buildings.
Near you in Letham
Recent enquiries here include premises near North Inch. The closest station to Letham is Perth station, about 1.6 miles south-east of the centre. A little further out are Murray Royal Hospital (2.2 miles east) and Huntingtower Castle (0.8 miles north-west). Open spaces near Letham include Dupplin Lake and Mailer Hill.
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and our waste is bagged and taken away as we go. For a building near Letham, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Agree which areas must stay open
- Warn occupants and staff about the work
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
How the quote is worked out
To price the job, we consider:
- Whether old sealant has to be cut out first
- The total length or number of joints
- How accessible the joints are
- Phasing around occupants
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- The product your specification calls for
- The site address and postcode
- Your programme or deadline
- Approximate linear metres or a joint schedule
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or email a schedule or drawings.
FAQs: Letham
Does your area include sites such as Broxden Business Park, near Letham?
Yes, sites like Broxden Business Park are within our area, along with the rest of Letham. Send details of the unit and the work through our quote form for a quick quote.
Is Letham off your patch?
No. Places such as Letham are covered as much as the big towns. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
What exactly is a movement joint?
It’s a deliberate gap that lets the structure move without cracking. Expansion joint is a name often used for the same thing and both need a flexible seal.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
What sealant do you use in movement joints?
It depends on the movement, exposure and traffic. Low-modulus neutral-cure silicone suits many facade joints, while polyurethane is common in trafficked floor and deck joints.
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- Changing the joint layout or spacing of a structure
- Crumbling edges that would give a new bead nothing sound to grip
- Damaged metal nosings or cover plates over a joint
If you’re not sure, just phone 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Where we work in Letham
- Brickwork movement joints
- Podiums and floor movement joints
- Blockwork control joints
- Cladding panel joints
- Car park decks and ramps
- Precast concrete panel joints
Different surfaces, different methods
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. The joints need a low-modulus sealant with enough movement capability, and we’ll confirm the colours available for the specified product.
Podium joints
Podiums take foot traffic, planters and weather. A sealant suited to both traffic and exposure is used.
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Nearby places to Letham
Also in Letham
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules.