Expansion Joint Sealing in Aywick
Expansion and movement joint sealing in walls, decks and floors throughout Aywick and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Layers of sealant in a movement joint
- Water dripping through deck or ramp joints
- Movement joints with split or torn sealant
Expansion joint sealing near Aywick
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How the quote is worked out
To price the job, we consider:
- How much existing material needs removing
- Quantities, in metres or numbers
- Working within restricted access windows
- Induction, permit and paperwork requirements
We don’t publish prices, since every building and every scope is different. Call for a quote.
What to include in your enquiry
However big the job, these details speed things up:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- Any specification or named product
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or send photos by email.
Expansion joint sealing for commercial buildings in Aywick
Joint design counts for as much as the sealant itself. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises. Most enquiries involve layers of sealant in a movement joint and joints where the bead has lost adhesion, across podiums and floor movement joints, cladding panel joints and car park decks and ramps. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Aywick, preparation and product choice get the time they need.
Travel to smaller places like Aywick is planned so the work is done in one trip where possible. Send photographs, joint widths and details of the traffic first.
A 12-month guarantee applies to all our work. Should something we installed fail, give us a call on 01277 525 020 or send details through our quote form and we’ll come back to it.
- Where
- Aywick (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Other services in Aywick
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. Jobs near Aywick are often grouped with others in the same area. Let us know if your dates have any give.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Share your working hours and any access restrictions
- Let building users know which areas are affected
- Clear stock, furniture or equipment away from the joints
Request a quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Read more
Leave it or put it right?
Closing a car park for a reseal is rarely an option. Phased work by bay or zone lets the rest stay in use without shutting the whole car park. Tell us what has to stay open and we’ll plan around it. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Aywick before they leak.
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
Why us?
- Joints cleaned back to sound surfaces
- Fully insured
- A fixed quote before work starts
- Colour agreed before work starts
See how commercial sealant jobs are priced or how we’re accredited.
What we are called out for in Aywick
Most movement joint failures come down to the joint stretching further than the sealant can take. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way unless width and product are reviewed.
These are often picked up first by site or facilities staff:
- Brittle, chalky sealant on external joints
- Rain penetration at brick or block movement joints
- Layers of sealant in a movement joint
- Arrises breaking up along floor joints
Around Aywick, open joints collect water and debris, and the arrises are the next to go; we’ll tell you if the edges need repairing first.
Comparing quotes
- Their plan for phasing and protecting the area
- How joint depth will be controlled
- How the existing material will be dealt with
- Will CSCS-carded applicators be on site?
Looking after the joints
For the best life from the joints:
- Record the sealant used and the date in the O&M file
- Inspect exposed joints once the cold weather has passed
- Keep scrapers and ploughs from dragging across joint sealant
- Reopen bays and walkways only after the stated cure time
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records, so the next reseal starts with the facts.
On a multi-storey car park, a failed joint typically shows up as a leak onto the deck underneath. That water often carries de-icing salts with it. Sealing the joint promptly stops it at source.
Expansion joint sealing in Aywick: the local picture
Aywick is within about 1 mile of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Work on Aywick has to fit the ferry timetable and the forecast. Send joint sizes and details of the traffic so the right materials come on the crossing.
For floors and slabs around Aywick, the product is chosen for the traffic and the movement at each joint.
Aywick is in the Shetland Islands. Looking for expansion joint sealing in Aywick? We can help, as we do across the Shetland Islands. Aywick is one of 63 places in the Shetland Islands on our list for movement joints.
Business premises anywhere in ZE2 are within our area for movement joints. If your building is just outside Aywick, we cover Mid Yell (3 miles north), Camb (4 miles north), Burravoe (4 miles south), Houbie (6 miles north-east) and Mossbank (9 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Aywick
Not far away are Loch of Quheyin and White Hill of Vatsetter.
Aywick: questions and answers
Does a site in Aywick have to shut while its joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we will plan from there.
Is Aywick inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Aywick included. Ferry times and the weather set the plan, so we ask for photos and a full list first.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we’ll price it properly.
What happens if it rains on the day?
Sealing onto a damp surface leads to adhesion failure, so external work waits for suitable conditions. We agree a revised date with you.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure.