Facade and window perimeter sealing in Aywick, Shetland Islands
Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Aywick. Send photographs or drawings for a fixed quote.
- Old perimeter mastic that has dried out
- Sealant pulling away from frames or panels
- Draughts around frames and panels
Facade sealing across Aywick
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
New build and refits around Aywick
Aywick is within about 1 mile of the coast. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so we check the specified product suits the exposure before the first bead. Scotland has its own building regulations, and in Aywick warrants come from the local authority verifier. The mastic package follows the approved specification.
For contractors building in or near Aywick, we seal to the drawings, the specification and the programme.
Aywick is in the Shetland Islands. If you are looking for facade sealing in Aywick, we can help, as we do across the Shetland Islands. Aywick is one of 63 places in the Shetland Islands on our list.
Postcode districts covered here: ZE2. Sites close to Aywick are covered too, including Mid Yell (3 miles north), Camb (4 miles north), Burravoe (4 miles south), Houbie (6 miles north-east) and Mossbank (9 miles south-west). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Local landmarks in Aywick
For a walk, there’s Loch of Quheyin and White Hill of Vatsetter.
Facade sealing in Aywick
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We cut out failed facade joints and reseal them with a facade-grade sealant suited to the movement. We work on coping and flashing joints, perimeter joints where frames meet the structure and cladding panel joints, and the usual reasons a site gets in touch are sealant pulling away from frames or panels and hard, chalky sealant that no longer flexes. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Aywick it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site around Aywick, we plan the mastic in as few trips as the programme allows. Clear drawings, a programme and photographs let us bring the right sealants, primers and backing rod first time.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Aywick (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Common questions from Aywick clients
Is Aywick inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Aywick included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can you work to our programme on a site in or near Aywick?
Yes. Send the programme and drawings, and we will plan the mastic to suit the stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
What do you charge?
Every job gets its own fixed quote. To get one, call 01277 525 020 or email us.
Do you use silicone for external joints?
It depends on the joint, the substrate and any specification. Specifications often refer to BS EN 15651-1 for facade sealants or BS EN 15651-2 for glazing.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Are you insured?
Yes. We are fully insured, including public liability cover.
What sealant work can’t fix
We check first that sealant really is the fix. It isn’t the answer for:
- Installing or repairing glazing systems
- Water getting in through cracked render or porous masonry
- Specialist high-level access methods
If in doubt, give us a call on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
What we seal
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Shopfront frames
- Coping and flashing joints
- Window and door perimeters
- Cladding panel joints
Cost factors for facade joints
Your fixed quote is built from the real scope. It takes account of:
- Quantities, in metres or numbers
- Induction, permit and paperwork requirements
- Working within restricted access windows
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- Any dates the work must fit around
- Whether the building will be occupied during the work
- Any specification or named product
- Whether an asbestos survey exists
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, ring 01277 525 020 or use the quote form.
What we’re called out for in Aywick
Not every failure is in the sealant: if the edge of the render, concrete or coating breaks away, the bead goes with it. We tell you when the edges need repairing before resealing.
Typical triggers for a call:
- Sealant pulling away from frames or panels
- Failed sealant on precast panel joints
- Water coming in around window frames
- Discoloured or dirty facade joints
Historic houses such as Windhouse (4.2 miles north-west of Aywick) are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Comparing quotes
- Their pre-qualification and accreditations
- Whether their applicators hold CSCS cards
- Is the sealant right for the movement and the substrate?
- Can the work be phased to keep areas open?
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Also in Aywick
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules.
Building owners and managing agents use us on everything from one building to a spread of sites around Aywick. One quote can cover more than one site, so there’s one set of paperwork to deal with.
How a job runs
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a day or two for a few elevations, and longer where access has to be moved around the building, and our waste is bagged and taken away as we go. For work around Aywick, we aim for one trip, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
What we need from you
- Let building users know which areas are affected
- Send any specification or drawings in advance
- Tell us which areas need to stay in use
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.