Expansion joint sealing in Houbie
Work needed on a movement joint in Houbie? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Torn sealant in brick or block movement joints
- Weathered movement joint sealant that no longer flexes
- New sealant over old, now failing
Expansion joint sealing in Houbie
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Houbie
A movement joint only works while its seal does. When the sealant splits or lets go, the gap fills with dirt and water; the joint jams, its edges take the load and the arrises spall. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. Most enquiries involve joints where the bead has lost adhesion and water dripping through deck or ramp joints, on podiums and floor movement joints, car park decks and ramps and brickwork movement joints. Facilities teams, main contractors and managing agents in Houbie tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In smaller places such as Houbie, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Location
- Houbie (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Our process
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For work around Houbie, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Before we start on site
- Send your site hours and access windows
- Clear stock, furniture or equipment away from the joints
- Warn occupants and staff about the work
Getting a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Advice
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Damaged metal nosings or cover plates over a joint
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Cracking or settlement that calls for an engineer’s assessment
If you’re not sure, just give us a call on 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- Blockwork control joints
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
- Brickwork movement joints
- Car park decks and ramps
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Houbie can sit alongside others in a wider programme across the Shetland Islands.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Expansion joint sealing around Houbie: points for this area
Houbie is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Being on an island, Houbie means planning around ferry times as well as the weather. Photos and joint sizes help us load the right products.
Schools such as Fetlar Primary School have movement joints in their walls and floors that are easy to overlook. For floors and slabs around Houbie, the product is chosen for the traffic and the movement at each joint.
Houbie is in the Shetland Islands. Looking for expansion joint sealing in Houbie? We can help. Across the Shetland Islands, 63 places are covered, including Houbie.
Anyone looking for expansion joint sealing in ZE2 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Close to Houbie, our area also takes in Clivocast (6 miles north), Aywick (6 miles south-west), Mid Yell (7 miles west), Camb (7 miles west) and Burravoe (9 miles south-west). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Local landmarks in Houbie
Well-known places in the area include Fetlar Interpretive Centre (less than half a mile south-east). The countryside around Houbie includes Vord Hill and Skutes Water.
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Record the sealant used and the date in the O&M file
- Include every elevation and deck joint in periodic inspections
- Keep traffic off new joints until the cure time is up
- Report split or peeling joint sealant early
Keep wheels, feet and water off new joints until the sealant has cured. The time varies with product, conditions and joint depth. Keeping the area coned off until then avoids tyre marks and damage.
Once debris packs a failed joint, the structure has nowhere to expand. The edges then take the pressure and start to spall. A sound seal keeps the joint working.
FAQs: Houbie
Will you travel to Houbie on the island?
Yes. We cover the whole of Scotland, and that includes island locations such as Houbie. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Does a coastal location like Houbie affect which sealant is used?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
What will the job cost?
Every job gets its own fixed quote. For yours, give us a call on 01277 525 020 or email drawings and photos with a description of the work.
Which product is best for expansion joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote.
Surface by surface
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. The right filler or sealant for the traffic and movement protects them, and tell you if edges need repairing first.
Podium joints
Podium joints often sit within a waterproofing system. Where the specification calls for sealant, we reseal.
What else we do in Houbie
What sets the cost
There’s no standard rate for sealant work, because every site is different. What we look at:
- Which sealant the job calls for
- How accessible the joints are
- Joint width, depth and condition
- Whether the work must be split into stages
Pricing movement joints depends on quantities, condition and access, and any specification that applies. Call for a quote.
Details that help us quote
Whether it’s one area or a whole building, these details speed things up:
- Clear photos of the problem areas
- Whether the building will be occupied during the work
- The site address and postcode
- Anything awkward about access or site hours
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.