Commercial washroom and wet-area sealing in Burravoe, Shetland Islands
Sealing in commercial washrooms, showers, kitchens and wet areas in Burravoe. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Stained sealant around pans and urinals
- Sealant laid over old silicone and now peeling
- Panel joints letting water behind
Washroom sealing for businesses in Burravoe
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Washroom sealing for commercial buildings in Burravoe
Whether it’s a single toilet block in Burravoe or a programme across several buildings, the route is the same: details first, then a fixed quote, then the work, then the 12-month guarantee. Photos and a rough count of basins, urinals, showers and cubicles help us give a quick quote and a site visit is an option. Site teams most often ask us about discoloured joints around urinals and WC pans and shower tray joints that have opened up, on showers, trays and wet room floors, urinals and WCs and kitchens and tea points. For commercial sealant work in Burravoe, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around smaller places such as Burravoe, washrooms and kitchens are found in hotels, pubs, schools, care homes and halls. Mould grows into sealant in any wet room that doesn’t dry out, and the answer is removal and a fresh bead of anti-mould silicone.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Burravoe (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Sanitary sealant for Burravoe buildings
With the shore within about 1 mile, Burravoe counts as a coastal location, and coastal hotels, guest houses and holiday sites tend to fill up in the busy months. Heavy seasonal use is hard on shower and basin sealant, which is why off-season resealing makes sense. Work on Burravoe has to fit the ferry timetable and the forecast. A room count and photos of each washroom help us bring enough sealant and plan the days.
Washrooms near Burravoe get the old silicone stripped out and a fresh anti-mould bead on dry joints.
Burravoe is in the Shetland Islands. Looking for washroom sealing in Burravoe? We can help. Burravoe is one of 63 places in the Shetland Islands on our list for washrooms and wet areas.
Anyone looking for washroom sealing in ZE2 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Brough Road and Meadow Bank Road. Just outside Burravoe, we also work in Aywick (4 miles north), Mossbank (5 miles south-west), Firth (6 miles south-west), Mid Yell (7 miles north) and Vidlin (9 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or send details through our quote form.
What’s near Burravoe
Nearby you’ll also find The Old Haa (less than half a mile south). Green spaces nearby include Loch of Vatswick.
Burravoe: questions and answers
What paperwork can you provide for a job in Burravoe?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Will the toilets in our Burravoe building be out of use?
Rarely all at once: work is phased so some facilities are always available. Each area is handed back once the sealant has cured enough to use.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
What’s the quickest route to a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
How long before the toilets can reopen?
Cure times vary by product and temperature. You’ll get a reopening time for each area before we leave it.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
On site: what to expect
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Tell us who will meet us and how to get in at your building near Burravoe. That goes into the plan alongside the quote.
- We start by inspecting the fittings and joints and flagging problems sealant can’t solve.
- We agree which rooms close and when, so users always have somewhere to go.
- The failed silicone is stripped and every face scraped clean of residue.
- We clean and dry every surface so the new sealant can grip.
- New sanitary silicone with anti-mould additives goes in and is tooled neat.
- You get a reopening time for every room, with signage left up until then.
What we need from you
- Let building users know which areas are affected
- Let us know about inductions and permits
- Tell us your opening times and when work is allowed
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Read more
What the job involves on each surface
Urinals and WC pans
Pan and urinal joints face constant cleaning and splashing. Stained or split joints here trap smells and look unhygienic.
IPS and cubicle panels
Panels flex slightly in use so the bead needs to cope with it. Loose panels are flagged before any sealant goes on.
Building owners, agents and FMs in Burravoe
We work for building owners and managing agents on everything from one building to a spread of sites around Burravoe. Several sites can go on one quote, so there’s one set of paperwork to deal with.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
What happens if it’s left?
Bleaching black sealant may lighten it for a few days but the growth is inside the bead and returns. A full reseal deals with it and your cleaning team stops chasing it. Around smaller places like Burravoe, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why us?
- Sealing commercial buildings since 2005
- Colour agreed before work starts
- 12 months’ guarantee on every job
- Products installed to the manufacturer’s instructions
What else we do in Burravoe
What we are called out for in Burravoe
Sometimes the sealant fails because something behind it is moving or wet: a loose panel, a leaking waste or water coming through the wall. We check for that first and say if it needs a plumber or another trade.
What tends to prompt an enquiry:
- Discoloured joints around urinals and WC pans
- Failed sealant behind washroom basins
- Complaints from staff, guests or users about tired washrooms
- A new bead over an old one coming away
For a hall at a building such as St Colman's Episcopal Church, resealing the kitchen and toilets can be fitted between bookings.
Questions to ask before you book
- Health and safety accreditation such as CHAS
- Who will actually carry out the work
- What level of public liability insurance do they hold?
- What the guarantee covers, and for how long
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.