Facade Sealing contractors in Burravoe
Looking for facade sealing in Burravoe? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Discoloured or dirty facade joints
- Perimeter sealant that has split or peeled away
- Weathered facade joints that have lost their grip
Facade sealing near Burravoe
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What the job involves on each surface
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. These joints take full exposure to weather and need a durable external sealant.
Perimeter joints at frames and structure
These frame-to-structure joints take a lot of movement and weather. We cut them out, prepare both faces and reseal to the specification using a sealant classified for that use.
About our facade sealing in Burravoe
Most facade joint failures trace back to the joint, not just the sealant. Joint width needs to match how far the joint moves and how far the sealant can stretch, while rod fixes the depth and stops the bead sticking to the rear. The enquiries we see most involve air leaks through failed facade joints and weathered joints at frame-to-structure perimeters, across window and door perimeters, cladding panel joints and shopfront frames. Most enquiries from Burravoe start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Sites near smaller places like Burravoe can mean longer travel, so the mastic is planned with as few trips as the job allows. Clear drawings, a programme and photos let us bring the right sealants, primers and backing rod first time.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Burravoe (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Burravoe: questions and answers
Can being near the sea in Burravoe affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Can you work to our programme on a site in or near Burravoe?
Yes, we work to the programme and the sequence the site sets. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Do we need an asbestos check before resealing?
In older non-domestic buildings, old sealant can contain asbestos. The dutyholder’s asbestos register should be checked first; if it’s suspected, work stops until it has been tested. Removal of asbestos isn’t something we do.
Do you use silicone for external joints?
Most facade and window perimeter joints take a low-modulus neutral-cure silicone. Some joints call for hybrid, PU or polysulphide instead, as the specification or substrate requires.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Will you check whether the sealant is causing the leak?
Yes. Photos are often enough to start, followed by a visit if needed. Failed perimeter sealant is a common cause, but not the only one.
Mastic packages on Burravoe sites
Burravoe lies within about 1 mile of the sea. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so joint design, primers and product choice deserve extra care. For an island location such as Burravoe, work is planned around ferry crossings and the weather. Everything for the package travels with us, so drawings and quantities matter.
For contractors building in or near Burravoe, we seal to the drawings, the specification and the programme.
Burravoe is in the Shetland Islands. Across the ZE2 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across the Shetland Islands, 63 places are covered, including Burravoe.
If you need facade sealing in ZE2, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. For a building on Brough Road and Meadow Bank Road or nearby, we can quote for facade joints. Just outside Burravoe, we also work in Aywick (4 miles north), Mossbank (5 miles south-west), Firth (6 miles south-west), Mid Yell (7 miles north) and Vidlin (9 miles south). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Near you in Burravoe
Well-known places in the area include The Old Haa (less than half a mile south). Open spaces near Burravoe include Loch of Vatswick.
Other services in Burravoe
Do you need facade sealing in Burravoe?
Sun, rain and temperature swings wear facade sealant down over the years. UV and weather harden the sealant until it can’t stretch with the building.
Clients usually get in touch after noticing something like this:
- Hard, chalky sealant that no longer flexes
- New sealant peeling off old mastic
- Leaks at window and door perimeters
- Sealant pulling away from frames or panels
A facade joint near Burravoe lasts when width, depth and backing are right, not just the finish.
What your quote should include
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Which product they’ll use, and why it suits the joint
- Proof of insurance
- What the guarantee covers, and for how long
Keeping the joints sound
For the best life from the joints:
- Check that rainwater leaves the facade the way it was designed to
- Inspect facade joints on a regular cycle
- Don’t wait for a second leak before calling
- Combine resealing with other works that need access
Let the new sealant cure before washing the facade or windows near it. Pressure washers and harsh cleaners can damage a fresh bead.
Coordinate facade sealing with other external works. Sharing the access keeps the cost down and cuts time on site.
What sets the cost
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- The size and state of each joint
- Working within restricted access windows
- Whether old sealant has to be cut out first
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- The type of building and who uses it
- The site address and postcode
- Anything awkward about access or site hours
- Specification clauses that apply
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Tell us who will meet us and how to get in at your building near Burravoe. We will confirm the plan with the fixed quote.
- We start with photographs, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- We go over the completed work with you before leaving.
What we need from you
- Tell staff and tenants when we will be in
- Send asbestos survey details if the building is pre-2000
- Send any specification or drawings in advance
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or use the quote form with what you know.
Advice
Doing it in-house
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.