Construction Mastic in Burravoe
Commercial sealant work in Burravoe for contractors, FMs and building owners: mastic packages for new-build and refurbishment projects, quoted at a fixed price.
- Oversized or tapered gaps around new frames
- A long mastic snag list close to completion
- New external sealant already peeling away
Construction mastic for businesses in Burravoe
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Construction mastic for commercial buildings in Burravoe
A typical mastic package covers more than window perimeters: external door and window perimeters, internal decorators’ caulk where specified, sanitary joints in bathrooms and washrooms, kitchen worktops and splashbacks, and snagging before handover. One contractor for all of it keeps the responsibility in one place, and one applicator team gives a consistent finish. We work on floor and skirting junctions, cladding and panel joints and sanitary and kitchen joints, and the usual reasons a site gets in touch are sealant knocked or painted over by other trades and missed perimeter joints on a new elevation. A specialist sealant contractor works differently from a general builder: in Burravoe, that means joint design, primers and backing rod as standard.
External sealing around Burravoe depends on dry faces and the right temperature. We build some give into the plan and agree it with the site manager.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Burravoe (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
How a job runs
At the end of each section, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. Travel to smaller Scottish places like Burravoe is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- Drawings, specification and programme come to us.
- Quantities are measured and a fixed price returned.
- We agree with the site team which areas come first.
- Plots or floors are sealed as they’re handed over.
- Every joint is cleaned, set to depth and sealed with the specified product.
- After snagging, the work is handed over under our 12-month guarantee.
Preparing the site
- Let us know about inductions and permits
- Share the asbestos register for older buildings
- Tell staff and tenants when we’ll be in
Ask for a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or use the quote form if you’d rather talk the job through.
Related advice
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Different surfaces, different methods
Fire-rated sealant where specified
Fire-rated sealant is one type of fire-stopping product. Other products are used for some services and gaps. Record requirements are agreed with the quote.
Snagging before handover
Snags typically come from damage by following trades, missed joints or poor earlier work. Snagging can be included or priced separately.
General trades versus a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
What else we do in Burravoe
Facades, frames and programmes in Burravoe
Burravoe lies within about 1 mile of the sea. Coastal exposure means perimeter and cladding joints work harder than on an inland job, and the sealant, primer and backing need choosing with that in mind. Island jobs, Burravoe among them, are planned around the ferry and the forecast. We need drawings and a programme early so materials come on the right crossing.
A facade joint near Burravoe lasts when width, depth and backing are right, not just the finish. For contractors building in or near Burravoe, we seal to the drawings, the specification and the programme.
Burravoe is in the Shetland Islands. Commercial clients in Burravoe use us for work on mastic packages, as part of our coverage of the Shetland Islands. Our the Shetland Islands coverage takes in 63 places.
If you need construction mastic in ZE2, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Brough Road and Meadow Bank Road are within our area. If your building is just outside Burravoe, we cover Aywick (4 miles north), Mossbank (5 miles south-west), Firth (6 miles south-west), Mid Yell (7 miles north) and Vidlin (9 miles south). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Burravoe
Well-known places in the area include The Old Haa (less than half a mile south). Green spaces nearby include Loch of Vatswick.
FAQs: Burravoe
Is Burravoe inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Burravoe included. Island work is planned around ferry crossings and the weather, so photos and a full list before we travel are essential.
Can being near the sea in Burravoe affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
What will the job cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
Can you clear a mastic snag list before handover?
Yes. We can work through a mastic snag list area by area before handover and damaged joints are redone properly.
Are you insured?
Yes. We are fully insured, including public liability cover.
Which sealant will you use?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Get the mastic subcontractor involved early in the programme
- Brief following trades on areas that have been sealed
- Keep product details for future maintenance
- Ask installers to correct oversized gaps first
A new structure shifts as it loses construction moisture. The right product in each joint copes with that while rigid fillers and caulk can crack where movement is larger. We can advise if a joint needs a different product.
External joints sealed in poor weather are a common cause of early failure. Holding off until conditions suit avoids callbacks so external sequencing builds in some flexibility.
Why act early in Burravoe
It helps to bring the mastic subcontractor in before the package is urgent. Early involvement means gaps, products and access are sorted before the programme bites rather than at the snagging stage. Leave it late and they turn up on the snag list. Renewing every failing joint on one visit is the sensible approach for a place like Burravoe. Photos of each area help us quote the whole job.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- A Constructionline member, so easy to vet
- Products installed to the manufacturer’s instructions
- Old sealant cut out, never sealed over
- Clear, fixed quotes
Read what affects the cost or our accreditations.