Coloured Sealant contractors in Burravoe
Need coloured sealant in Burravoe? It’s simple: send details, get a quote, we seal, guaranteed.
- Poorly tooled joints on visible finishes
- Sealant that no longer suits recoated frames
- Fit-outs with a sealant colour in the specification
Need coloured sealant in Burravoe?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our coloured sealant in Burravoe
On a finished interior or a high-quality elevation, the sealant is part of the look. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick. The right product for the joint always comes first, then the colour. The enquiries we see most involve patch repairs in several different colours and poorly tooled joints on visible finishes, on office fit-out finishes, cladding panels and natural stone and brick. Facilities teams, main contractors and managing agents in Burravoe tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For a job around Burravoe, the Scottish weather is part of the planning: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Indoor work isn’t held up by rain.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Burravoe (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Working on commercial sites near Burravoe
The sea is no more than about 1 mile from Burravoe. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Where a frontage needs a particular colour, the product still has to suit that exposure. Being on an island, Burravoe means planning around ferry times as well as the weather. Send photographs, a complete list and any colour references first, so nothing is left behind.
A lasting commercial joint around Burravoe begins with the old bead fully out and the faces clean and dry. Where a joint is on show in Burravoe, we’ll check which shades the product offers before work starts.
Burravoe is in the Shetland Islands. Businesses, contractors and managing agents in Burravoe can call on us for colour-matched joints. 63 places across the Shetland Islands fall within our area, including Burravoe.
Work on colour-matched joints is covered throughout ZE2, for business premises of every kind. Buildings on Brough Road and Meadow Bank Road are within our area for colour-matched joints. We also cover Aywick (4 miles north), Mossbank (5 miles south-west), Firth (6 miles south-west), Mid Yell (7 miles north) and Vidlin (9 miles south). For island and remote sites, travel and materials need planning ahead.
Landmarks near Burravoe
A little further out are The Old Haa (less than half a mile south). For a walk, there’s Loch of Vatswick.
Different surfaces, different methods
Natural stone
Stone has variation, so the aim is a colour that sits naturally against it. A stone-compatible, neutral-cure sealant avoids staining.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. Colour-matched joints keep the finish consistent across floors.
After the work
Cleaning and maintenance staff play a part too. Share these points with them:
- Standardise colours across a portfolio
- Check a trial length in real light
- Plan full-run reseals on visible elevations
- Brief cleaners about newly sealed joints
Note the sealant type and colour on the building file. Future repairs can then use the same colour, avoiding a patchwork.
Make sure every contractor knows which sealant and colour are on the building file. That keeps new work in line with what’s there.
Your questions answered
Our building in Burravoe is near the coast: does that change the sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do you offer colour-matched sealant for buildings in Burravoe?
Yes, we can usually get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Travel to smaller Scottish places like Burravoe is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
What we need from you
- Move anything stored against the joints
- Send any specification or drawings in advance
- Warn occupants and staff about the work
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Related advice
What else we do in Burravoe
Why act early in Burravoe
Across a chain of shops or hotels, consistency matters. Setting one product and colour for every site avoids variation across the programme. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What you get with us
- Commercial sealant work since 2005
- Health and safety: CHAS accredited
- Fully insured
- Standard and matched colours in many product ranges
Read our cost guide or how we’re accredited.
Commercial clients in Burravoe
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.